-The Leveled Super Duties ONLY Thread-

In respect to a similar thread that was created on another forum, I thought it would be useful to have a thread here at PSA that is dedicated to Leveled SD's only. This thread can serve as a reference point for all of the pics, opinions, and experiences submitted by members that have done the modifications.

My only request is that if you post photos of your truck, please also post the following information to support your photos:

What lift Brand/Inches/Front/Rear?
What Wheels Size and Offset?
What Tires Brand and Size?


Please feel free to include any opinions and experiences (good or bad) that detail your modifications.

***I would have loved to kick this thread off with the first post but my truck isn't done yet ****

I will get this started.

Here is one of my old trucks.

2011 F350
Icon 2.5 Stage 4 Leveling Kit
35x12.50x20 Toyo MT
RBP 22x9 +0mm Wheels

Here is another truck we have done.

2012 F250
Icon Stage 4 Leveling Kit
325/50/22 Toyo AT2
22x10 American Force Wheels -24mm Offset

Nice work Josh!

Here's mine when it was just a true front level kit. Stone stock suspension except for a 1" Icon under spring spacer up front. Sat almost dead level...maybe 1/4" high up front.
22x10.5 BMF's with 33x12.50x22 Toyo MT's

2.5" up front

My old 05 only leveled in the front 33 with 20x12 riots

here is mine
Ebay knock off leveling kit....2.7 I think that wat it said....
18x9 -12offset
295/70/18

My 05
Icon stage 1 2.5"
Gear 22x12 -44
325/50 Hankooks

Here's a crappy pic of my 09. 2.5" Readylift leveling kit, stock rear suspension. 20x9 BMF Novakanes with 325/60-20 Terra Grapplers.

Here's mine. 2.5" spacer up front, 5" block out back. 35x12.50 Toyo A/T's on 20x10 -24 Fuel Couplers.


Sent from my iPhone using Tapatalk

My old set up Icon 2.5 leveling kit with 5" rear OUO traction block on 20x10 weld Cheyennes w/ 35x13.50 ATZ's


Current set up, I'm not sure if its considered leveled or lifted anymore but, Icon 2.5 w/ 1" bottom spacer for 3.5" and 6" rear OUO traction blocks, ALA's and 2.5 resi shocks. With 20x12 weld cheyennes w/ 35x13.50's

2.5 spacer upfront ,35 12.55 tires with +18 18-9 wheels

I think once you touch the back it's a lift...unless you're dropping it to match the front.

That's what I was told too...

See, when I purchased my Carli Back Country leveling kit, I was hoping it would resemble this exact stance: http://www.ford-trucks.com/forums/1...5-on-my-truck-with-35x12-50-on-18-wheels.html

Although the truck pictured has a Commuter leveling kit installed, there was no advertised difference in height between that kit and the one that I chose. I just hope that mine ends up looking like the one posted...

HOOV3R said:

My 05

Icon stage 1 2.5"

Gear 22x12 -44

325/50 Hankooks

Click to expand...

Love this setup!! Cleared fully? Or minor trimming involved ?


Sent from my iPhone using Tapatalk

Might be my eyes but looks like that front bumper is trimmed....

MNStroker316 said:

Love this setup!! Cleared fully? Or minor trimming involved ?


Sent from my iPhone using Tapatalk

Click to expand...

Slightly major trimming. Fenders and bumpers were reshaped.

HOOV3R said:

Slightly major trimming. Fenders and bumpers were reshaped.

Click to expand...

Ah yes, I can see the front bumper trimming now.


Sent from my iPhone using Tapatalk