Go Back   PowerStrokeArmy > Power Strokes > Aftermarket Super Duty 1999 - Current

Reply
 
Thread Tools Display Modes
  #1  
Old 09-17-2011, 02:56 PM
UNBROKEN's Avatar
UNBROKEN UNBROKEN is offline
Colonel
Member's Gallery
 
Join Date: May 2011
Posts: 2,751
Default Awesome tool for figuring out wheel backspace stuff

Best one I've run across yet.....

http://www.rimsntires.com/specs.jsp


Someone should stick this....
  #2  
Old 09-21-2011, 07:11 PM
17BLKplat's Avatar
17BLKplat 17BLKplat is offline
Lieutenant
Member's Gallery
 
Join Date: May 2011
Location: Southern New Jersey
Posts: 648
Default

Was messing with that a week ago, good tool for sure
__________________
BB1 :: 06 F250 CCSB . fully built . DPC '10 Competitor . 2005-2011 SOLD
BB2 :: 2011 F250 CCSB Lariat Ultimate
IDP Tuning+Torq2.1 | AFE | Recon | AMP steps | RBP wheels | Nitto | Custom Projectors w/ LED Fogs
Work Wagon: 2012 F450 XL Single Cab w/ 11' Reading Body Utility

Recon Lights | Custom Wrap | Custom Ladder Rack
  #3  
Old 09-21-2011, 09:50 PM
Arisley's Avatar
Arisley Arisley is offline
Mod Squad
Member's Gallery
 
Join Date: May 2011
Location: Arlington, Texas
Posts: 9,217
Default

You are correct sir.
__________________
E99 ECLB Dually, 2010 bed, 2005 headlights, smoked clearance lights, 2001 cup holder.
365,XXX miles. Pure stock, sorta.
SDRCM #478
PSA Conspirator # 22
  #4  
Old 09-23-2011, 01:29 PM
steele86 steele86 is offline
Sergeant
Member's Gallery
 
Join Date: Jul 2011
Location: brush prairie wa
Posts: 284
Default

what offset should i use on my 03 f250 with 4inch lift and 35x12.5x17? no tire shop will tell me unless i buy a set of wheels
  #5  
Old 09-24-2011, 08:38 PM
GreasyFingers's Avatar
GreasyFingers GreasyFingers is offline
Lieutenant
Member's Gallery
 
Join Date: Sep 2011
Posts: 627
Default

That is what this calculator is for. Stock 99-04 wheels have 4.5” backspacing and are 7” wide. So that would be 12 or 13mm of backspacing. Now you need to figure out how wide of a wheel you want and how far you want it to stick out past the stock wheel. Then use the calculator and do the math.

I don’t recall what the backspacing is for 05-07 wheels, and know anything of 08+. That might be a useful bit of info for those using this.
  #6  
Old 09-25-2011, 10:52 PM
UNBROKEN's Avatar
UNBROKEN UNBROKEN is offline
Colonel
Member's Gallery
 
Join Date: May 2011
Posts: 2,751
Default

If someone has the list of stock wheel size and backspace info for different years I'm sure one of the staff would edit that into the first post for easy access.
  #7  
Old 09-25-2011, 11:12 PM
Jeff@Spartan's Avatar
Jeff@Spartan Jeff@Spartan is offline
General
Member's Gallery
 
Join Date: May 2011
Location: Georgia
Posts: 5,409
Default

I know factory 08-10 wheels are 8" wide. I am not 100% sure on the back spacing though. I believe it is around 6-6.5"....
__________________
Jeff Dodd

2012 Ford F-250 CC/SB
  #8  
Old 09-25-2011, 11:39 PM
skew12 skew12 is offline
Lieutenant
Member's Gallery
 
Join Date: Jun 2011
Posts: 591
Default

Definitely going to use this
__________________
2003 7.3 CCSB
Marty's Fuel, PHP Chip, Full Force Stage 2's, 38R, Tymar, ISSPRO EV2 Boost/Pyro/Tranny, Diamond Eye Duals 4"
Icon 6"/Toyo's 37"/Fuel 20x12's
  #9  
Old 10-23-2011, 01:54 PM
HoustonRider's Avatar
HoustonRider HoustonRider is offline
Sergeant
Member's Gallery
 
Join Date: Oct 2011
Location: Houston, Texas
Posts: 134
Default

very cool... bookmarked for sure.
__________________
2012 F250 6.7 Lariat Ultimate CCSB 4x4
King Shock Performance Extremes (custom valving)

2011 F250 6.7 Lariat Ultimate CCSB 4x4
King Shock Performance Series Adjustable
Nitto Trail Grappler 35/12.50/20

2009 F250 6.4 KR CCSB 4x4
******* Tech/*** ******
Goodyear MT/R Kevlar
Fabtech Dirt Logic 2.25

2011 Raptor CC
SDHQ, VisionX, General (sold at 9,000, couldn't take a beating)
  #10  
Old 05-29-2012, 09:57 AM
neverkickn's Avatar
neverkickn neverkickn is offline
Colonel
Member's Gallery
 
Join Date: May 2011
Location: AR
Posts: 2,699
Default

^^^^that looks fantastic!
__________________
14 f250 cclb xl....stock
01 f250 scsb xlt....modified and still slow!
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 02:44 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

Designed by Military Ltd