2011-2014 Turbo Kits master list

Bobby@MPD

New member
Joined
Mar 25, 2014
Messages
309
Reaction score
0
NON vgt turbo kit
install kit (no turbo) $3,399.99
Non-VGT Cast 366 (66-73-.91 T4) $4,199.98
Non-VGT Cast 363 (68-68-.91 T4) $4,299.98
Non-VGT FMW S365 (65-68-.90 T4) $4,704.99
Non-VGT FMW S367 (67-73-.90 T4) $4,817.49
Non-VGT FMW S371 (67-73-.91 T4) $4,857.99
Non-VGT FMW S467 (67-83-.91 T4) $5249.99

Stock 2015 VGT- $2,299.99
Stock 2015 VGT with Upgraded intercooler piping- $3,299.99


Upgraded Intercooler- $1,000

For our "12 days of savings" we will be offering a free upgrade to any S300 FMW charger with the purchase of a cast S366....So for $4,199.98 you can get any FMW S300 you want.
 
Last edited:

14ccd

New member
Joined
Jun 21, 2014
Messages
118
Reaction score
0
Those are good prices. What would labor cost (ballpark) to install the '15 VGT turbo and all the necessary parts on my '14. I just need basic labor cost for now at least so I know how much to budget.
 

14ccd

New member
Joined
Jun 21, 2014
Messages
118
Reaction score
0
I should rephrase that and say $100 per hour is average in my area so i can use that as a starting point.
 

2011f250powerstroke

New member
Joined
Dec 19, 2014
Messages
12
Reaction score
0
Location
NC
I'm running the streetmax on stock fuel.

Is it a significant difference between the stock turbo? Gettin ready to pull the trigger on a new turbo and i just dont want to spend the money on something where i regret that i would have bought something better.
 

Cheap6.7

Member
Joined
Jul 10, 2014
Messages
940
Reaction score
0
Location
Rockisland County IL
Is it a significant difference between the stock turbo? Gettin ready to pull the trigger on a new turbo and i just dont want to spend the money on something where i regret that i would have bought something better.

I would say there is a good difference but also will point out tunning plays a big role. With the streetmax your looking at 600hp with the proper amount of fuel.
 

2011f250powerstroke

New member
Joined
Dec 19, 2014
Messages
12
Reaction score
0
Location
NC
Here is a stock '15 turbo.
ejanuset.jpg

I recently purchased a turbo from a nearby shop and its a 64mm 2015 style but it doesent have the inlet face machined out, it looks just like the factory turbo face as in the pic above but with a billet wheel. I called the shop and they said they dont machine the faces of the inlet anymore like in the pic above. Is this more restrictive to air flow or does it even make a damn? Just wondering if i should send it back and tell them to machine it or if its even worth messing with. Any input is appreciated, thank you.
 

Latest posts

Members online

No members online now.
Top