01 f-350 on 20x12 ?????'s

1badpsd

New member
Joined
May 18, 2011
Messages
769
Reaction score
0
Location
lebanon,tn
Im converting my long bed dually to a single wheel and plan on running 20x12 with-44 offset with 33 12.50 toyos. I have a 3 inch leveling kit so what im wondering is will they rub? Thanks guys
 

David N

Active member
Joined
May 18, 2011
Messages
1,418
Reaction score
1
Location
Eastern NC
I run 20x12's with 33x13.50's and I have minimal rub with just a 2" leveling kit. I had to trim the front valence and the lower part of the inner fender. And it doesn't it the spring. But your's being a F350 and a 3" leveling kit, you should clear that no problem. And if there is any trimming, it would be hardly any at all.
 

1badpsd

New member
Joined
May 18, 2011
Messages
769
Reaction score
0
Location
lebanon,tn
Thanks so much for the info. I had 22.5s with 255/70 (37's) and they barely rubbed at full lock but im new to the single wheels and offsets and all that
 

smokedout250

New member
Joined
May 18, 2011
Messages
2,654
Reaction score
0
Location
harrisburg oregon
You should only rub inner fender.... I'm running 35s on 20x10s -24mm and I'm only running 2.5" leveling kit


Sent from my iPhone using Tapatalk
 

MINK

New member
Joined
May 18, 2011
Messages
5,714
Reaction score
0
Location
London,OH
It wont rub.

Add-a-leaf, 33x12.50 Toyos and 20x12s

47717_145316282167891_5920992_n.jpg
 

Terry_7.3

New member
Joined
Nov 26, 2012
Messages
56
Reaction score
0
Location
Crawfordsville IN
Running 325/50r20 which are equivalent to 33x13.5 on some 20x12's with stock suspension. I rub on inner driver side fender some. I just have to trim it a little and it will be fine.
 

07powerstroke91

New member
Joined
Jul 16, 2012
Messages
273
Reaction score
0
I have 33x13.50 on 20x12's and at first they rubbed quite a bit. I had to do some trimming of the OEM Lariat flares, and now they just rub on the inner fender. You could definitely make it work with no rubbing at all I just don't like the idea of taking sawzalls and hammers to my truck lol
 

MINK

New member
Joined
May 18, 2011
Messages
5,714
Reaction score
0
Location
London,OH
I have 33x13.50 on 20x12's and at first they rubbed quite a bit. I had to do some trimming of the OEM Lariat flares, and now they just rub on the inner fender. You could definitely make it work with no rubbing at all I just don't like the idea of taking sawzalls and hammers to my truck lol

05+ have a wider front axle which is why you had a issue with the flare when the leaf spring trucks dont.
 

1badpsd

New member
Joined
May 18, 2011
Messages
769
Reaction score
0
Location
lebanon,tn
Bump this back up. I actually lifted the front another inch and had 4.5 inch blocks made for the rear. Would I be able to clear 35's now?
 

Latest posts

Members online

Top