hawker25
New member
- Joined
- Feb 16, 2018
- Messages
- 42
- Reaction score
- 0
I added an auxiliary fuel filter and water separator in front of my factory water separator on my 2014 6.7. I used factory style quick connects I found online so this is easy to remove if needed for some reason. I went through many ideas and designs before I was happy with the location. I wanted it tucked up inside the frame rail so it is protected. I have included a parts list with part numbers, where I got them, and what it cost me.
Parts List
-Baldwin Fuel filter Base #FB1311 $20-Amazon
-Donaldson Filter & Water Separator #P553207 rated 99%@ 3 microns and 95% Emulsified Water Removal $23.48-Amazon
-Female Quick Connect 1/2 x 1/2 Nylon, Straight #FQC8 $10.00-Vulcan Diesel Performance
-1/2" Male Quick Connect x 1/2" Pushlock #MQC8PL $10.00-Vulcan Diesel Performance
-RaceFlux 1/2" Hose Barb to AN10 O-Ring Adapter Fitting x2 #OB-10-08 $7.90x2-RaceFlux
-225 PSI Rated Fuel Injection Hose approved for Diesel & Biodiesel x6 Feet #NBH H351A $6.29x6-NAPA Auto Parts
-High-Pressure Clamps x2- I had these left over from a previous project, Got them from NAPA they were around a few bucks a piece.
-Custom L Bracket made from 1/8 inch cold rolled steel, Dimensions are
7x7.5x4 inches $40-Local Machine Shop
-3/8x1inch bolts x4 $.50x4 Ace Hardware
-3/8 Lock Washers x4 $.15x4 Ace Hardware
Total Cost Approx $160.00
Parts List
-Baldwin Fuel filter Base #FB1311 $20-Amazon
-Donaldson Filter & Water Separator #P553207 rated 99%@ 3 microns and 95% Emulsified Water Removal $23.48-Amazon
-Female Quick Connect 1/2 x 1/2 Nylon, Straight #FQC8 $10.00-Vulcan Diesel Performance
-1/2" Male Quick Connect x 1/2" Pushlock #MQC8PL $10.00-Vulcan Diesel Performance
-RaceFlux 1/2" Hose Barb to AN10 O-Ring Adapter Fitting x2 #OB-10-08 $7.90x2-RaceFlux
-225 PSI Rated Fuel Injection Hose approved for Diesel & Biodiesel x6 Feet #NBH H351A $6.29x6-NAPA Auto Parts
-High-Pressure Clamps x2- I had these left over from a previous project, Got them from NAPA they were around a few bucks a piece.
-Custom L Bracket made from 1/8 inch cold rolled steel, Dimensions are
7x7.5x4 inches $40-Local Machine Shop
-3/8x1inch bolts x4 $.50x4 Ace Hardware
-3/8 Lock Washers x4 $.15x4 Ace Hardware
Total Cost Approx $160.00
Attachments
Last edited: