6.7l EGT Sensor Codes

eclipsemf

New member
Joined
Mar 4, 2017
Messages
23
Reaction score
0
I just got done replacing the CP4 and fuel system on this truck and finally got it running. Runs great besides the reduce power flashing on the truck. I pulled the codes and it is all 4 banks of the EGT sensors. I looked underneath and it has no sensors on the exhaust and the wires just hanging out there. It has a "custom" exhaust put on by the previous owner.

My question is whats the easiest way to go about getting that fixed or do I even need them? Is there a good tuner I can use to bypass them? This is a truck I am flipping so just need it to get back to the codes gone so I can move it

Thanks in advance!
 

sootie

Well-known member
Joined
Oct 3, 2012
Messages
11,854
Reaction score
29
you need to reinstall the factory exhaust or program the truck with a race tune.
 

eclipsemf

New member
Joined
Mar 4, 2017
Messages
23
Reaction score
0
Okay thank you for the response that what I figured. I see there are a ton of options out there for tuners. Any you recommend in this case cheapest is better for me so I can get the truck gone and be done w it!

Looks like a SCT x4 is what I will be going with
 
Last edited:
Top