Next set of Hummer tires...

6000 miles on them as of now.

Rotated them about 10 days ago... Best set of tires I have owned yet!

Only thing I dont like is Feltz used a paint pen to mark the load range and % of tread on each one... Well its not off yet! LOL

So some have a faint "D99" or "D100" somewhere on them.

1200 miles from Ft Lewis Washington to Barstow Cali... Non-stop... Then load up this...



And 1200 miles non-stop back... No issues.

Love these things! Cant go wrong for $200 a piece!

Those mt ozs are great tires I've been running them on my trucks for 3 years now, trying to find a Set of fresh ones now

Sent from my SAMSUNG-SM-N900A using Tapatalk

You've got enough of them on those trailers to last a while now.


Posted from ***itville, USA

I had a set of 16.5s for a bronco too I picked them up off summit couple years back

Sent from my SAMSUNG-SM-N900A using Tapatalk

dsberman94 said:

You've got enough of them on those trailers to last a while now.


Posted from ***itville, USA

Click to expand...

About half of the trailer tires are junk. Some are brand new, but the sidewalls are cracked.

However I did keep the best trailer for myself and it has a good set of near new OZ's... There going to go on the International truck.

I LOVE the Baja's... Much better then the OZ's so far. Next set will be the MTR's and then I will go from there in the future.

Vogel469 said:

Those mt ozs are great tires I've been running them on my trucks for 3 years now, trying to find a Set of fresh ones now

Sent from my SAMSUNG-SM-N900A using Tapatalk

Click to expand...

Where are you located?

Central nj

Sent from my SAMSUNG-SM-N900A using Tapatalk

Contact Feltz out of WI...

https://www.facebook.com/FeltzAutoTire

Or Bigfoot military tires out of FL...

https://www.facebook.com/pages/Bigfoot-Military-Tires/346311808831177

Feltz has MUCH better shipping rates, but Bigfoot has more selection and is more responsive.

Btw joe, wtf is your plan with all those trailers again?


Posted from ***itville, USA

dsberman94 said:

Btw joe, wtf is your plan with all those trailers again?


Posted from ***itville, USA

Click to expand...

Sold 3 of them, before I even listed them on CL... Might keep one, and then sell the other two as well...

Bidding on 5 more right now (hope to win 5 more, bidding on about a dozen.)...

Just buy and sell? Lol


Posted from ***itville, USA

Yup... just flipping.

Sent from my XT907 using Tapatalk

How much lift do you have to clear them.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

CSIPSD lists a 4" lift in his signature.

mustube said:

CSIPSD lists a 4" lift in his signature.

Click to expand...

Well **** tapatalk is not showing any sigs and thanks.

Sent from my SAMSUNG-SGH-I747 using Tapatalk

20,000 miles, still showing 10-11/32" left. Started with 18-19/32". Should see at least 35k out of them. Not bad for $200 a tire.

@CSIPSD
I know you have a 4" lift but I am curious if I could pull a b.warning on my truck limited lift cut the fenders with flares stuff them under. Would I have to re-gear as I have the 3:73, two piece rear drive shaft and limited slips.

You can always cut to fit if you don't mind hacking your fenders off. How much depends on your wheels, total backspacing (offset w/e), how much rubbing you are willing to put up with and what kind of driving you do.

I really want to try some 37" bfg projects.

mustube said:

You can always cut to fit if you don't mind hacking your fenders off. How much depends on your wheels, total backspacing (offset w/e), how much rubbing you are willing to put up with and what kind of driving you do.

I really want to try some 37" bfg projects.

Click to expand...

Do it Tank style. Minimal lift, big tires. Cut fenders with flares. Works good.