• 1) What are you selling?

    2) What is its condition?

    3) Where are you located?

    4) What is your asking price?

    5) Pictures/videos?

    6) At least 3 days between bumping your own ad.

    7) No more than 5 ads per individual at once.

    8) No commercial sales.

    9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.

    10) No feeler ads.

    11) No firearms or firearm accessories.

7.0L (6.4) Stroker Rotating Assembly & Custom Camshaft

Breaking Habits

New member
Joined
Feb 11, 2012
Messages
6,158
Reaction score
0
Location
Mapleton, Illinois
Selling my full rotating assembly for my pulling truck motor.

I had this in my previous engine that made over 1200 RWHP with stock appearing turbos and nitrous, and had a failure in a cylinder head that caused piston damage. The assembly had roughly 350 miles on it.

I had a set of FSR pistons made by D&J Precision Machine in Ohio for this set up with a 4.0" Bore. This should equal roughly 7.0L of displacement overall.

With the 3.89" Bore set up it was extremely torque and very, very responsive even at high elevation in Colorado. The torque was absolutely unreal.

Everything is like new, no damage, perfect. The pistons are brand new.

I had every intent of putting this back together with a large pair of precisions, but have since parted the truck out in favor of purchasing more farm ground

This set up includes

Stroker Crankshaft
Custom Length Carrillo Connecting Rods
H13 Tool Steel Wristpins (Duramax Spec)
(New)D&J Precision Machine FSR 4.0" Bore Pistons w/ Valve Reliefs & Custom Bowl
Billet Stage 2.5X Camshaft w/ Custom Small Base Circle

All this needs is to be balanced, order your spec of rings, and install.

This will need to be installed in a sleeved block.

You would have close to 20,000 to duplicate this set up.

Looking for $14,500.00 for the set up. For $500.00 I will include my cylinder block

Message for details, inquiries.

No tire kickers, no trades, no nonsense.

This is a drop in and go set up to hold 1600+ Horsepower, or go in an aggressive street truck

Thanks,
Jared
 

Kind

Active member
Joined
May 18, 2011
Messages
1,498
Reaction score
1
7.0L (6.4) Stroker Rotating Assembly & Custom Camshaft

I wish the Canadian dollar as better.
 

Breaking Habits

New member
Joined
Feb 11, 2012
Messages
6,158
Reaction score
0
Location
Mapleton, Illinois
Not handy. I have had everything boxed up for almost a year waiting to move forward on things.

I wish the Canadian dollar as better.
I'm willing to deal on it if you want to make something happen, just drop me a message.

What does farm land go for in Illinois?
In my area you see ground sell between 8,500 for low yielding white dirt/timber soil to 17,500.00 an acre for good black soil. (250/270Beans Corn / 60-75BPA Beans). I believe the state average is $12,600 per acre as of 2015.
 

Latest posts

Members online

Top