20% TO 40% OFF ON FORD OEM PARTS

TXGLASSMAN · Oct 23, 2013

sunrisefordparts said:
they only show that handle with the key hole, and im not sure if you could adapt a rear on the front door.

my driver door handle is the only one with a key, and the rear door handles look the same

so whats the price for a driver side rear door handle finished in platinum white?

or will it come black and ill have to paint it?

sunrisefordparts · Oct 23, 2013

TXGLASSMAN said:
my driver door handle is the only one with a key, and the rear door handles look the same

so whats the price for a driver side rear door handle finished in platinum white?

or will it come black and ill have to paint it?

yeah from the exterior they look the same but im not sure of the inside of the handle, it would come black needing to be painted list $86.65 sell $62.39

akfiremedic · Oct 23, 2013

sunrisefordparts said:
the driveshaft for your truck comes complete end to end with ujoints list $794.08 sell $619.38, i dont mind shipping it out but my only thing is if dropped at all by ups or fed ex or rolling around there trucks at all may damage the shaft. getting one ordered from ford may take about 1 week or longer because it shows they are on back order but doesnt have a release date. as foir the pigtail any transaction will be smooth and painless. we offer paypal or cc# over the phone.

Does it ship fully assembled or in two pieces with covers over the slip joint ends? Could it be boxed up? I had some 2.5 ton axle shafts shipped from TX in cardboard with paper packing and they survived.

sunrisefordparts · Oct 23, 2013

akfiremedic said:
Does it ship fully assembled or in two pieces with covers over the slip joint ends? Could it be boxed up? I had some 2.5 ton axle shafts shipped from TX in cardboard with paper packing and they survived.

most shafts are in a box and in one piece, basically shipped the same way

akfiremedic · Oct 23, 2013

sunrisefordparts said:
most shafts are in a box and in one piece, basically shipped the same way

That's a darn long box!!

Ok, can you give me the shipping dimensions and a weight? Let me check with my shipping contact.

Joshbaker · Oct 23, 2013

sunrisefordparts said:
the switch for heater/ac (potentiometer) list $22.18 sell $13.31
if needed the knob list $11.07 sell $7.97
free shipping
q#302961

Well hot daym, finally something on this truck that isn't super expensive. How about a passenger side door handle?

Don't need the nob but thanks. And how do i go about paying you and giving you my shipping info? Hoping to buy it tomorrow. And would it be possible to have my wife call in the order? what info would she need to give you?

sunrisefordparts · Oct 23, 2013

Joshbaker said:
Well hot daym, finally something on this truck that isn't super expensive. How about a passenger side door handle?

Don't need the nob but thanks. And how do i go about paying you and giving you my shipping info? Hoping to buy it tomorrow. And would it be possible to have my wife call in the order? what info would she need to give you?

inner or outer handle? and we could do paypal or cc# over the phone which ever is easiest for you .

sunrisefordparts · Oct 23, 2013

akfiremedic said:
That's a darn long box!!

Ok, can you give me the shipping dimensions and a weight? Let me check with my shipping contact.

well it shows 61lbs but not sure on measurments, the box most likely is 6x6x? prob just measure you driveshaft and add a few inches for the box length.

Joshbaker · Oct 23, 2013

Outer door handle. Some clown broke mine trying to break into the truck.

TXGLASSMAN · Oct 23, 2013

sunrisefordparts said:
yeah from the exterior they look the same but im not sure of the inside of the handle, it would come black needing to be painted list $86.65 sell $62.39

know anyone we can call to find out if the rear door handle will work on the front door?

if we can get that figured out ill take one

akfiremedic · Oct 24, 2013

sunrisefordparts said:
well it shows 61lbs but not sure on measurments, the box most likely is 6x6x? prob just measure you driveshaft and add a few inches for the box length.

Thanks. I'll check on the freight. How long are the quotes good for again?

RiVerBum01 · Oct 24, 2013

Need a passenger side taillight lens for a 01 f250. Only need the lense if that's possible.

sunrisefordparts · Oct 24, 2013

akfiremedic said:
Thanks. I'll check on the freight. How long are the quotes good for again?

they usually last quite a while unless some major price update but not usually to common.

sunrisefordparts · Oct 24, 2013

RiVerBum01 said:
Need a passenger side taillight lens for a 01 f250. Only need the lense if that's possible.

its the lense and body list $40.09 sell $29.11
free shipping
q#303082

SeeYa · Oct 24, 2013

Checking to see if you sell the overhead console for a 2002 F250 (Flint)

Part #'s 519A70, 11586, 518S48

Thanks!

Diane

sunrisefordparts · Oct 24, 2013

SeeYa said:
Checking to see if you sell the overhead console for a 2002 F250 (Flint)

Part #'s 519A70, 11586, 518S48

Thanks!

Diane

if you order the 519a70 console it has the other two items in it
519a70 list $133.90 sell $96.41
11586 (worst case) list $29.82 sell $21.47
518s48 list $26.68 sell $19.21
free shipping
q#303147

akfiremedic · Oct 25, 2013

Hey, I called in an order for that wiring pigtail (quote 302907). Talked with Ralph on the phone. He said I could get a UPS tracking number when it shipped. It was supposed to go out already. I gave him my email. Can you look into it?

Sent from my KFJWI using Tapatalk HD

sunrisefordparts · Oct 25, 2013

akfiremedic said:
Hey, I called in an order for that wiring pigtail (quote 302907). Talked with Ralph on the phone. He said I could get a UPS tracking number when it shipped. It was supposed to go out already. I gave him my email. Can you look into it?

Sent from my KFJWI using Tapatalk HD

it went usps tracking #9114901159815393294857

john stuttle · Oct 25, 2013

X Code Springs

Can you get me a price on X code front springs, U bolts and Nuts for a 2001 F350 Supercab SRW 4X4 shipped to:

5427 Barker Lane
Indianapolis, IN 46236

thanks

sunrisefordparts · Oct 25, 2013

john stuttle said:
Can you get me a price on X code front springs, U bolts and Nuts for a 2001 F350 Supercab SRW 4X4 shipped to:

5427 Barker Lane
Indianapolis, IN 46236

thanks

just messaged you.