Gen3 hpop questions

campbellflage

Member
Joined
Dec 17, 2012
Messages
745
Reaction score
0
Location
Hudson, FL
Bought off another member and will be doing install here shortly.
1. Use new stock gasket for install? Mine used the one with the screen, when I bought this hpop it was covered in grey rtv.
2. What’s the hex nut on the bottom of the gen3, it covers one of the holes in the gasket (see pic with gasket). Remove it?
3. Anyone run an oil bypass setup with one of these in place?

Thanks all!
 

Attachments

  • 4EADEA1C-46B7-4299-AA54-E814B5B27DBA.jpg
    4EADEA1C-46B7-4299-AA54-E814B5B27DBA.jpg
    8.8 KB · Views: 94
  • 4B9E5193-BC86-4767-9401-E9E65CE7921E.jpg
    4B9E5193-BC86-4767-9401-E9E65CE7921E.jpg
    6 KB · Views: 92

DieselDC

Member
Joined
Jan 10, 2017
Messages
401
Reaction score
0
It’s better if you call swamps and talk to Jonathan as he will give you all the info you need. Btw you making a race motor??? That’s big oil!!!


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...
 

campbellflage

Member
Joined
Dec 17, 2012
Messages
745
Reaction score
0
Location
Hudson, FL
It’s better if you call swamps and talk to Jonathan as he will give you all the info you need. Btw you making a race motor??? That’s big oil!!!


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...

Not a race motor, 300/200s goin in
 

DieselDC

Member
Joined
Jan 10, 2017
Messages
401
Reaction score
0
Nice! Definitely need gen3 for them injectors. Them sticks are competition sticks for sure! This will be a fun daily!


—————signature—————
~Don’t overthink something simple~
...:uptight people suck:...
 

DZL JIM

Member
Joined
May 18, 2011
Messages
913
Reaction score
0
Location
North East Ohio
What issues are you seeing to think the Gen 3 is too much?
I ran my own version daily driving and it sucked. Too many quirks to make it worth while.
My HB Sr. supported my 300/200% enough to hold 3800 psi at wide open throttle, so a Gen 3 isn't the only option for 300/200%'s.
 

Magnum PD

Active member
Joined
May 18, 2011
Messages
9,566
Reaction score
6
Location
VA
Get up above 1500 rpm or so and the duty cycle will be in the single digits and the computer will throw a code and go into the 725 psi default
 

Latest posts

Members online

Top