Go Back   PowerStrokeArmy > Power Strokes > 6.7 Tech

 
 
Thread Tools Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 01-12-2018, 02:03 PM
Texan6Seven Texan6Seven is offline
Private
Member's Gallery
 
Join Date: Jul 2014
Posts: 38
Default 30 minute serpentine belt R/R without removing fan.

It can be done for those not wanting to buy the extra tools to remove the fan. I removed the old belt without cutting that either. If you remove the bolt holding the fan clutch wire harness bracket and disconnect both ends of said harness itís free to rotate towards the fan allowing you to slip the belt over one fan blade then rotate the fan around and the belt slips off. Installation is in the reverse order. Check that the belt is routed in the proper orientation and reinstall the fan clutch bracket and harness. Just thought this may help some folks on here.
 

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 11:17 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

Designed by Military Ltd