Go Back   PowerStrokeArmy > Power Strokes > 6.7 Aftermarket

Reply
 
Thread Tools Display Modes
  #1  
Old 06-18-2017, 02:34 PM
andrewtac andrewtac is offline
Corporal
Member's Gallery
 
Join Date: Apr 2017
Posts: 59
Default Midwest pipe install question

On what I think is the CAC pipe there are two bungs. What goes in there, is it a factory sensor? If not what do I need to plug them so I can install tomorrow? I polished them today and am done messing with it.
  #2  
Old 06-18-2017, 04:00 PM
sootie's Avatar
sootie sootie is offline
General
Member's Gallery
 
Join Date: Oct 2012
Posts: 9,794
Default

Your stock cold side pipe has a sensor in it-i believe iat. Can't say what the other is.
__________________
Proud Supporter Of............

Midwest Diesel & Auto...Gear Head Automotive Performance...No Limit Fabrication...Barder Turbo Service...PMF Suspension...
  #3  
Old 06-19-2017, 04:10 PM
andrewtac andrewtac is offline
Corporal
Member's Gallery
 
Join Date: Apr 2017
Posts: 59
Default

There were two plugs with the hardware. The sensor in the CAC pipe I took off was a push in with a set screw. Is there a screw in temp sensor that will plug into the harness?
  #4  
Old 06-19-2017, 04:36 PM
RNally's Avatar
RNally RNally is offline
Sergeant
Member's Gallery
 
Join Date: Oct 2013
Location: Glenville, PA
Posts: 145
Default

You will just use the plugs in this case. The sensor from the plastic CAC tube will just be removed and plugged into the factory connector, not hooked into a pipe. Unless you have some aftermarket temp sensor/nozzle you won't need the 2 additional bungs, unless you have something of the sort.
__________________
2017 Lariat F250
  #5  
Old 06-19-2017, 04:49 PM
andrewtac andrewtac is offline
Corporal
Member's Gallery
 
Join Date: Apr 2017
Posts: 59
Default

Polished the pipes, need to polish the intake too.
Attached Images
File Type: jpg IMG_20170619_141103.jpg (1.54 MB, 105 views)
  #6  
Old 06-19-2017, 07:50 PM
bigrpowr's Avatar
bigrpowr bigrpowr is offline
<How I Fly
Member's Gallery
 
Join Date: May 2011
Posts: 14,916
Default

Quote:
Originally Posted by andrewtac View Post
Polished the pipes, need to polish the intake too.
looks great ! intake will be much easier than the stainless !
__________________
Tyrant , PIP , Alberta Speed , S P A R T A N and H&S Tuners Available

6.7 5" Custom Cold Air Intakes Available

H&S Motorsports Authorized Retailer

1-800-581-8986

Click the banner below for all things No Limit Diesel
  #7  
Old 06-20-2017, 04:14 AM
HeavyAssault's Avatar
HeavyAssault HeavyAssault is offline
Major
Member's Gallery
 
Join Date: May 2011
Location: Middle, VA
Posts: 1,127
Default

I used one for my BOOST PSI sensor. I guess they can be used for anything that is NPT.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:25 AM.

 

Powered by vBulletin®
Copyright ©2000 - 2017, vBulletin Solutions, Inc.

Designed by Military Ltd