Go Back   PowerStrokeArmy > Power Strokes > 6.7 Tech

Reply
 
Thread Tools Display Modes
  #1  
Old 06-12-2018, 04:45 AM
Raptorgabe's Avatar
Raptorgabe Raptorgabe is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2014
Posts: 447
Default P0341 code please help

Any help is appreciated !!! Was driving my truck home on the highway with cruise control set at like 75. All of a sudden the cruise control kicked off and no power when I pushed the gas . I pushed it again and it was fine and drove the rest of the trip . Boost was all over the place on my mini max and noticed the engine light on. Checked it and p0341 crank position sensor , cleared if and after I turn truck off and back on its back ! Truck starts normal with no extended cranking or no knocking . Truck just got back from body shop getting new hood and bumpers painted ! Any idea before I take It in ? Text me if easier please ! 3073214613

4359B5D1-6346-4497-8E50-BF9331C8A6AA.jpg
__________________
2012 tuxedo Lariet
12 lift on 40s
spe 15 retro turbo gear head tunes 15hpfp
Intake piping billet wheel machined housing
pmf fabricated bars
retrofitted lights
  #2  
Old 06-12-2018, 05:00 AM
BigRed97's Avatar
BigRed97 BigRed97 is offline
Sergeant
Member's Gallery
 
Join Date: Aug 2011
Location: Saugus MA
Posts: 484
Default

Replace the cam sensor and check the harness a for a few inches above the connector for chaffing. Fairly common
__________________
Truckless for now
  #3  
Old 06-14-2018, 04:04 AM
Raptorgabe's Avatar
Raptorgabe Raptorgabe is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2014
Posts: 447
Default

Quote:
Originally Posted by BigRed97 View Post
Replace the cam sensor and check the harness a for a few inches above the connector for chaffing. Fairly common
I was told maybe bad batteries so I tested em and they were both bad . But still the code comes up
__________________
2012 tuxedo Lariet
12 lift on 40s
spe 15 retro turbo gear head tunes 15hpfp
Intake piping billet wheel machined housing
pmf fabricated bars
retrofitted lights
  #4  
Old 06-16-2018, 05:32 PM
Raptorgabe's Avatar
Raptorgabe Raptorgabe is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2014
Posts: 447
Default

Quote:
Originally Posted by BigRed97 View Post
Replace the cam sensor and check the harness a for a few inches above the connector for chaffing. Fairly common
Any advice getting to that damn bolt ?
__________________
2012 tuxedo Lariet
12 lift on 40s
spe 15 retro turbo gear head tunes 15hpfp
Intake piping billet wheel machined housing
pmf fabricated bars
retrofitted lights
  #5  
Old 06-16-2018, 07:08 PM
BigRed97's Avatar
BigRed97 BigRed97 is offline
Sergeant
Member's Gallery
 
Join Date: Aug 2011
Location: Saugus MA
Posts: 484
Default

Sounds like you didnt pop the fan and shroud out...
For the 10 minutes it takes to pull you wont have to struggle
__________________
Truckless for now
  #6  
Old 06-16-2018, 10:35 PM
Raptorgabe's Avatar
Raptorgabe Raptorgabe is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2014
Posts: 447
Default

Quote:
Originally Posted by BigRed97 View Post
Sounds like you didnt pop the fan and shroud out...
For the 10 minutes it takes to pull you wont have to struggle
Not sure if we are talking about the same sensor . The sensor is on the drivers side in the Bell housing and you cant see it
__________________
2012 tuxedo Lariet
12 lift on 40s
spe 15 retro turbo gear head tunes 15hpfp
Intake piping billet wheel machined housing
pmf fabricated bars
retrofitted lights
  #7  
Old 06-17-2018, 10:59 AM
BigRed97's Avatar
BigRed97 BigRed97 is offline
Sergeant
Member's Gallery
 
Join Date: Aug 2011
Location: Saugus MA
Posts: 484
Default

Nope that's the crank sensor.

Cam sensor is on the front cover, about the 1 o'clock position looking at the balancer

P0341 is a cam sensor code not a crank sensor code
__________________
Truckless for now
  #8  
Old 06-17-2018, 02:17 PM
Raptorgabe's Avatar
Raptorgabe Raptorgabe is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2014
Posts: 447
Default

Quote:
Originally Posted by BigRed97 View Post
Nope that's the crank sensor.

Cam sensor is on the front cover, about the 1 o'clock position looking at the balancer

P0341 is a cam sensor code not a crank sensor code
I read my mini wrong lol
__________________
2012 tuxedo Lariet
12 lift on 40s
spe 15 retro turbo gear head tunes 15hpfp
Intake piping billet wheel machined housing
pmf fabricated bars
retrofitted lights

Last edited by Raptorgabe; 06-17-2018 at 02:33 PM.
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 01:34 AM.

 

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

Designed by Military Ltd