jtpappy
New member
Any tips on removing this?
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Passenger side valve cover
- Thread starter jtpappy
- Start date
forcefed6.4ford
New member
Don't break the graphite tube.
webb06
Active member
......x10!!!! Don't break the PCM connector either. Pretty straight forward though
jtpappy
New member
Do I have to mess
with the ac at all?
Sent from my iPhone using Tapatalk
with the ac at all?
Sent from my iPhone using Tapatalk
webb06
Active member
Nope. If you want more room you can remove the battery and battery tray. If you do that you'll have to slide the AC line out of the tray. No need to disconnect the line though
Csilva187
New member
- Joined
- Feb 20, 2013
- Messages
- 562
- Reaction score
- 0
Pop front lower valve cover bolt/stud out so it don't snag up on a/c. That's my ticket sliding cover up and out toward ya. For whatever reason my first go around I always remember that dang stud snagging lol.
Last edited:
Stroked777
New member
Remove air box, glow plug harness, and the gp module. Take off the oil fill and the drain back line. Undo the engine harness from the fire wall to get more room. And working between the wheel well and the top side of the engine get the bolts out and then work it's way out towards the front. You can do this without removing ac lines and without removing coolant if you have the skills LOL. BECAREFUL WITH THE BLACK HARD COOLANT LINE!!! if it breaks, well beterr take tomorrow off
