How to make 400 - 500 RWHP - 6.0L

389sixpack

Moderator
Joined
May 18, 2011
Messages
259
Reaction score
0
Location
New Jersey
This thread is for sponsors/vendors (or users) to post a list of their dyno/race proven combination of parts and tunes to reach a good reliable 400 - 500 rwhp - 6.0L build.

The intent is giving users insight of what they need to buy and do to reach their RWHP goals.

It is not open for arguments!


.
 
Last edited:

BlueWaffle

New member
Joined
May 18, 2011
Messages
3,239
Reaction score
0
Location
Grapevine, TX
just a suggestion but maybe make it 400hp. there is a big gap in spending between 400-420ish (tuner, intake exhaust) and 450 which will usually at least take a set of injectors (155's) and a fuel system (along with studs etc) to make it safe. just IMO of course...
 

389sixpack

Moderator
Joined
May 18, 2011
Messages
259
Reaction score
0
Location
New Jersey
LOL Noted - I think folks can differentiate there post by saying with this setup I make 500, or 475, or 450, etc. Just want a repository of build lists and results as a reference for everybody.
 

SIX_OHH

In the Brig (Banned)
Joined
May 18, 2011
Messages
2,306
Reaction score
0
400- any sct tune
450-recipe#1, sct custom tunes, ficm tune, fuel system upgrade.
450-#2,Sct custom tunes 155cc injectors,fuel system upgrade.
500-175cc injectors with fuel sytem and supporting mods.
 
Last edited:

strokin6L

Active member
Joined
May 23, 2011
Messages
2,979
Reaction score
0
Location
Springville NY
i made 435 with just intake, exhaust, and custom SCT tune back in '06. All it would really take to reach the 450 mark would maybe be a tuned FICM. A tuned FICM will net 20-30hp. Or a little water injection will make it to the 450 mark also.
 

03-Blue-Powerstroke

New member
Joined
May 18, 2011
Messages
431
Reaction score
0
Location
PA
i made 435 with just intake, exhaust, and custom SCT tune back in '06. All it would really take to reach the 450 mark would maybe be a tuned FICM. A tuned FICM will net 20-30hp. Or a little water injection will make it to the 450 mark also.

Yep I made 417 with intake, exhaust, and a race tune.
 

Dustball8504

New member
Joined
May 18, 2011
Messages
3,675
Reaction score
0
Location
Everett, PA
To make 500hp or over on a 07 6.0 what do you need to do besieds injections to the fuel system ?

175-190cc injectors, Airdog 2 or FASS 150 pump, Powermax turbo or 64/70 non vgt, custom tuned SCT. This will get you over 500hp.

To make it reliable you should delete the EGR, put a coolant filter on and put ARP or H-11 headstuds in.
 

BlueWaffle

New member
Joined
May 18, 2011
Messages
3,239
Reaction score
0
Location
Grapevine, TX
aftermarket lift pump and regulated return would def be fuel system mods I would do. I'm actually installing a reg return tomorrow...
 

KBROOKS

New member
Joined
May 18, 2011
Messages
20
Reaction score
0
I dynoed last weekend and made 448hp 787torque. With TSD tunes, exhaust,intake, Sct, headstuds, egr delete, 6.4 banjo bolts and an 03 turbo!!
 

03 tx pwr stroke

New member
Joined
Sep 27, 2011
Messages
1,027
Reaction score
0
Location
Texas
Just got the Nov issue of Diesel Power. Are the power combo mods they list for certain hp lvls correct or is this just a basic guideline to go by? Just because it's in a mag doesn't necessarily mean it's accurate, right?
 

Mwilbur516

New member
Joined
May 22, 2011
Messages
4,700
Reaction score
1
I just dynoed yesterday and got 451\999 on TSD tunes, S&B, MBRP turbo back straight pipe, EGR delete, ARP's, 6.4L banjo's, blue spring and a tuned FICM. Several runs and probably 50 people saw it.
 

Latest posts

Members online

Top