stroker_1999
New member
- Joined
- Nov 23, 2014
- Messages
- 44
- Reaction score
- 0
I did a 4wd conversion on a customers 2008 f450 everything works it's a manual floor shift 4wd.I can't get the 4wd indicators to work on dash I switched the transmission harness for the 4wd harness.If I use my IDS I can go in and do a cluster test and make the lights turn on high and low for 4wd but they won't work when you move shifter.I believe the cluster has to be programmed so it knows it has 4wd the IDS only programs to vin # on truck so I don't know if I need to take the cluster and stick it in a 4wd truck that has floor shift and program it to that vin #.To make the 4wd light work or if I can send the cluster out to be programmed for 4wd.
I even ohmd out the wires to switch on transfer case for 4wd switch to cluster plug it all works so I think it's in the programming I even tried another cluster from a buddy the 4wd lights worked.
I even ohmd out the wires to switch on transfer case for 4wd switch to cluster plug it all works so I think it's in the programming I even tried another cluster from a buddy the 4wd lights worked.
Last edited: