H&S Motorsports 6.4 Divided Turbo Kit Available!!!

HS-MotorsportsZane

New member
Joined
Aug 8, 2013
Messages
469
Reaction score
0
If you wanted you could buy the divided pedestal/downpipe and sx-e 66 or 69. The 66mm is around 20-30hp over the 64mm at wot, other then that there is no difference. The 64mm is more responsive down low over both of them. The 69mm will make 40-50hp over the 64mm, and is quite a bit slower down low. For overall drive ability is hard to beat the 64mm... If you want to change though just give Dallas a call here. 855-623-4450
 
Joined
Jan 19, 2015
Messages
752
Reaction score
0
The 64mm is capable of 600-650 hp. Do you have a 64mm kit already? (I only ask if you have it already because you're asking about the gains of the 64mm kit)
 

ONEFASTSTROKER

New member
Joined
Apr 15, 2012
Messages
55
Reaction score
0
Location
Southern Maryland
Looking at buy a used 64mm kit trying get some hp number on each turbo. Have you seen the the 64mm make 650hp or is that on a generous dyno? Looking to run low 12s on stock fuel and still be able to tow.
 
Joined
Jan 19, 2015
Messages
752
Reaction score
0
Over the last few months I have noticed that many people don't realize that these kits are actually $300 cheaper than our original kit. Still not a low quality kit, just less expensive!
 

Latest posts

Members online

Top