Go Back   PowerStrokeArmy > Power Strokes > Aftermarket Super Duty 1999 - Current

Reply
 
Thread Tools Display Modes
  #1  
Old 04-10-2015, 03:37 PM
Cory@RPHC Cory@RPHC is offline
Lieutenant
Member's Gallery
 
Join Date: Oct 2011
Posts: 504
Default 08 mirrors on 01 electronics

I've been doing some searching and haven't found an answer. I plan on putting 08 mirrors on my 01. Does someone make a plug adapter for these mirrors or do you still have to wire them in?
__________________
2001 CCLB 7.3 DD- Just a slow 6 speed but it gets me from point A to point B
  #2  
Old 04-10-2015, 03:56 PM
TyCorr's Avatar
TyCorr TyCorr is offline
General
Member's Gallery
 
Join Date: Jun 2011
Posts: 15,490
Default

My mirrors came with an adapter but I had to add so much shti it was easier to make a harness. I even tried to contact pico (made the original ford connectors) so I could switch my truck from the round to square style plug. I finally realized it was foolhardy to try using ford crap.

I got a generic 12 wire connector and wired it how I wanted. The best part is I can still plug oem round plug mirrors in.

I have a toggle switch for my mirror heat. If I forget, it shuts off with the key.
  #3  
Old 04-10-2015, 04:02 PM
Cory@RPHC Cory@RPHC is offline
Lieutenant
Member's Gallery
 
Join Date: Oct 2011
Posts: 504
Default

Well i dont think my 01 has heated mirrors so only thing I would need to do is wire in my turn signals?
__________________
2001 CCLB 7.3 DD- Just a slow 6 speed but it gets me from point A to point B
  #4  
Old 04-10-2015, 04:23 PM
TyCorr's Avatar
TyCorr TyCorr is offline
General
Member's Gallery
 
Join Date: Jun 2011
Posts: 15,490
Default

No. Most pre 03 trucks don't have heat. You have to add it on nearly every truck unless it has it. Its easy to add heat though. If the mirror has turn signals its probably going to have heat also.
  #5  
Old 04-10-2015, 05:03 PM
G Racing's Avatar
G Racing G Racing is offline
Major
Member's Gallery
 
Join Date: May 2011
Location: Southeast Texas
Posts: 1,643
Default

You can buy the mirrors with the adaptor for your truck
__________________
Those who say that it cannot be done should not interrupt the person doing it.

A truck without a turbo is like a man without balls.

Full line dealer for
American Force Wheels
Fuel wheels
BMF wheels
Dynatrac
Icon
Archoil
  #6  
Old 04-10-2015, 05:25 PM
Cory@RPHC Cory@RPHC is offline
Lieutenant
Member's Gallery
 
Join Date: Oct 2011
Posts: 504
Default

I know that now lol but I'd still have to wire in the turn signals
__________________
2001 CCLB 7.3 DD- Just a slow 6 speed but it gets me from point A to point B
  #7  
Old 04-11-2015, 07:56 PM
WILD_PHIL's Avatar
WILD_PHIL WILD_PHIL is offline
Major
Member's Gallery
 
Join Date: May 2012
Location: East TX
Posts: 2,392
Default

My power is hooked up but my heat and turn signals are not. I plan on fixing this next month.

E99 F350/zf6/guages/arp/comp/stellite/ billet wheel/ bellowed... Need more fuel and more air.
__________________
2009 F250 2WD CC
Family Wagon

13 Passat TDI SE 6MT

2005 F250 EC LWB 4X4 XL
Lifted, Customized, and DeStroked.
  #8  
Old 04-11-2015, 10:43 PM
Cory@RPHC Cory@RPHC is offline
Lieutenant
Member's Gallery
 
Join Date: Oct 2011
Posts: 504
Default

Well good phil. Let me know what you did lol
__________________
2001 CCLB 7.3 DD- Just a slow 6 speed but it gets me from point A to point B
  #9  
Old 04-12-2015, 08:13 AM
7.3toreador 7.3toreador is offline
Private
Member's Gallery
 
Join Date: Dec 2014
Posts: 10
Default

Where can you get the mirrors & adaptor together or just the adaptor by itself?
  #10  
Old 04-12-2015, 02:49 PM
Cory@RPHC Cory@RPHC is offline
Lieutenant
Member's Gallery
 
Join Date: Oct 2011
Posts: 504
Default

A1 auto sells it all together with the adapter for like 369. But I could get a set of mirrors off eBay for 288. May call A1 auto and see how much that adapter is itself
__________________
2001 CCLB 7.3 DD- Just a slow 6 speed but it gets me from point A to point B
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 07:09 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2020, vBulletin Solutions, Inc.

Designed by Military Ltd