#1
|
|||
|
|||
![]()
I have read about the change in rods around january of 2016 production.
The photos of the upgraded rods seem substantial. Is the January date based of engine production or truck production date? My truck is a January 2016 production. I think 2nd week. Thanks yall
__________________
Thad S. 1996 F250 7.3 5spd ECSB stg1's, d66 WW2 , r-return, intercooled, DP chip, Adrenaline 2008 F-350 SRW 6.4 CCSB Lariat (gone, missed) 2016 F-250 6.7 CCLB Lariat (missing some "OEM" parts) Flight Fab 4-link, S&B, FTE Resonator |
#2
|
||||
|
||||
![]()
Where are you reading this information? All I recall is it was being said the 11-16 rods are same and they upgraded in 2017 sometime with earlier 2017 trucks getting the original style rods.
__________________
2020 F450 STX CCLB 4x4 1997 F250 TVS Supercharged, S369, R&D IDI T4 mount, my 350/200s, Honey Badger SR, my tuning, bmw m3 seats, RSK TTB, Toyo M/T 1948 GMC pickup Detroit 453T 1951 Mack A51T 1916 Federal 1 1/2 Ton Last edited by superpsd; 02-13-2020 at 11:30 PM. |
#3
|
|||
|
|||
![]()
I cannot find the link to where i saw this, but it was a reference date when i searched the part numbers of the old and new rods.
Of course that was a year ago. I will try to find that and post a link later today. I may just call my parts guy at the dealer and give him my vin to see which rod number is specified.
__________________
Thad S. 1996 F250 7.3 5spd ECSB stg1's, d66 WW2 , r-return, intercooled, DP chip, Adrenaline 2008 F-350 SRW 6.4 CCSB Lariat (gone, missed) 2016 F-250 6.7 CCLB Lariat (missing some "OEM" parts) Flight Fab 4-link, S&B, FTE Resonator |
#4
|
||||
|
||||
![]()
11-16 original style rod production officially stopped in Jan 2016. The newer rod (shown on left) started then but according to what Ford Engineers have told me, they didn't start going in every single 6.7 for 2017-2019 engines until about Jan 2017 because they were still installing all the older rods in engines to use up leftover inventory. Pretty much all late manf Job 1 2017 to current 6.7 trucks are guaranteed to have the updated rods. 99% of 2016 6.7 older body style trucks still have the old rod design. The few 2016 trucks that got the updated ones are slim pickings. Most 2017s that got the older rod design were F450 duallys because they were produced first for the Job 1 lines.
![]() Sent from my SM-N975U using Tapatalk
__________________
08' F350 6.4L EC/LB FX4 - long gone. 2017 F350 CCLB 6.7 SRW Platinum - 64/80 VGT Compound Setup, Exergy 10mm with 45% Inj, Warren Comp 6R, OUO Suspension, KING Shocks, FASS 140 LPFS, Lowered on 4800's, No Limit I/C & Goodies Last edited by Black AOD; 02-14-2020 at 09:40 AM. |
#5
|
|||
|
|||
![]()
So this is apparently the newer part number—— https://www.fordpartsgiant.com/parts...3z-6200-a.html
And this is the older number—— https://www.fordpartsgiant.com/parts...3z-6200-a.html Here again I do not know the date my engine was built but i am guessing it may have either one of those rods. I wish that i had the tech look at them when they did my oil pan.
__________________
Thad S. 1996 F250 7.3 5spd ECSB stg1's, d66 WW2 , r-return, intercooled, DP chip, Adrenaline 2008 F-350 SRW 6.4 CCSB Lariat (gone, missed) 2016 F-250 6.7 CCLB Lariat (missing some "OEM" parts) Flight Fab 4-link, S&B, FTE Resonator |
#6
|
|||
|
|||
![]()
Would the replacement rod number based off of my vin designate what was in it upon build or just supersede?
__________________
Thad S. 1996 F250 7.3 5spd ECSB stg1's, d66 WW2 , r-return, intercooled, DP chip, Adrenaline 2008 F-350 SRW 6.4 CCSB Lariat (gone, missed) 2016 F-250 6.7 CCLB Lariat (missing some "OEM" parts) Flight Fab 4-link, S&B, FTE Resonator |
#7
|
||||
|
||||
![]() Quote:
__________________
08' F350 6.4L EC/LB FX4 - long gone. 2017 F350 CCLB 6.7 SRW Platinum - 64/80 VGT Compound Setup, Exergy 10mm with 45% Inj, Warren Comp 6R, OUO Suspension, KING Shocks, FASS 140 LPFS, Lowered on 4800's, No Limit I/C & Goodies |
#8
|
||||
|
||||
![]()
Was there a change in rods for the 2020s or only pistons?
__________________
00 cc/sb zf6 F250- Some stuff done always more to do-Fuel 300/200s Air-Garrett 68/94-Oil SRP 1-Airdog to Fuellab 97 cc/sb- zf-5- Work in progress. PMF rsk w/ SD axles. 66 turbo, E fuel, 230/100s. SB DD clutch. 08 cc/sb - Elite bottom end - 2 fuelers, 59vgt/78atmo, Midwest 100% nozzles and coated heads etc.... www.teddavisautos.com Many parts available for super duty trucks PM me. |
#9
|
||||
|
||||
![]()
2020 rods are different. Longer rods not interchangeable. SPE made a video where they tore a 2020 shortblock down to start looking at whats interchangeable and how hard it will be to fit a 2020 in an older truck.
https://youtu.be/HFv5TkIG0d0
__________________
2020 F450 STX CCLB 4x4 1997 F250 TVS Supercharged, S369, R&D IDI T4 mount, my 350/200s, Honey Badger SR, my tuning, bmw m3 seats, RSK TTB, Toyo M/T 1948 GMC pickup Detroit 453T 1951 Mack A51T 1916 Federal 1 1/2 Ton Last edited by superpsd; 02-15-2020 at 01:08 AM. Reason: https://youtu.be/HFv5TkIG0d0 |
![]() |
Thread Tools | |
Display Modes | |
|
|