Banks boost gauge

89 Stroker

Active member
Joined
Feb 3, 2013
Messages
1,317
Reaction score
0
Location
Southern Cali
What is the wire on the back of a banks dynafact boost gauge for? Power or dimmer? Gauge came with the truck and was cleaning up the gauges and cut the back wire to remove the gauge, the gauge never turned on with the lights but it works
 

EPA

Member
Joined
Feb 2, 2019
Messages
232
Reaction score
0
Should just be a ground... Should have 2 wires on the connector at the gauge red (power) and black (ground).
If they are both black just run 1 to keyed or light switch power (I think directions said center wire) and the other outer wire to a ground. All its for is the light bulb. If you only have 1 wire the other was probably cut or pulled out of the bulb connector at some point... So you would need to fix that first. Here is a picture of an old dynafact boost is on left...2 wires.
 

Attachments

  • s-l400 (4).jpg
    s-l400 (4).jpg
    28.8 KB · Views: 73
Last edited:

Latest posts

Members online

Top