wheel sensors

I just put lift and new wheels and tires on my 2015 f-350 and the tpms lighy is now on. Is there a way to reprogram the sensor or a way to just turn them off.

Are the sensors in your wheels or did you leave them out?

Sent from my SAMSUNG-SM-G890A using Tapatalk

I had All new sensors put in wheels

If they're aftermarket or Ford, they'll have to be recalibrated. Your truck may also not agree with the sensors if they're aftermarket, even if they're recalibrated.

Is there a way to just turn them off or the light

I was playing around with the IDS program briefly and didn't see where you can disable them. The lowest tire pressure you can set it 30 psi.

Billy T.
[email protected]

The sct wil let me change air pressure but that has no effect on the sensor it keeps telling me in the dash tire sensor fault.

When I change tunes on my 2012 w/sct it asks if I have changed tire pressure. I just always set it to zero. Light goes off. (Have have sensors in my wheels also... didn't matter)

I had ford re program mine while it was in for an oil change. When i talked to my diesel tech he seemed a little hesitant to even talk about the recal but asked what tire pressures i was running and said he would look into it. Got my truck back and no tpms warnings or anything and pressures were right where i wanted them. Looked at my service report and nothing on there about any of it. Guess i owe him one. But ive seen others on here say ford did the same for them as well

I will try resetting the pressures. If that doesn't work I will take it to the tire shop and see if they can help me.

H&S is the only tuner I know of that will actually turn them off.

Ouch that hurt ,Tried what you said and set pressures to 0 and so far it has worked thanks for the info..