• 1) What are you selling?

    2) What is its condition?

    3) Where are you located?

    4) What is your asking price?

    5) Pictures/videos?

    6) At least 3 days between bumping your own ad.

    7) No more than 5 ads per individual at once.

    8) No commercial sales.

    9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.

    10) No feeler ads.

    11) No firearms or firearm accessories.

6.4 pistons

FourEyed

Member
Joined
May 7, 2013
Messages
91
Reaction score
1
I have a set of .20 over pistons for a 6.4. These have a total of 60 miles on them once installed in a fresh rebuild. The rings have never been installed or filed, so nothing should be needed to run them.

I did a complete rebuild on my truck including new shortblock. I had someone check P/V clearance on the engine, and it turns out they screwed it up. After getting the truck back together it dropped a cylinder. I ended up with a rocker that fell off and damaged a valve. The valves on #7 lightly contacted the piston. Not enough to damage the piston, but the coating is chipped off in spots (see pic). RCD can re-do the coating on the chipped piston, but I wanted to leave it as-is so the buyer can see everything first.

I was going to get these fly-cut, and re-coated, but was under a time constraint, and ended up buying a new set of pistons. I swapped rings over to the new pistons, and installed them.

Looking to get $950.. even if you buy a brand new piston to replace the chipped coating one, you are ahead several hundred on a new set.


50012804081_096c6232c3_z.jpg
[/url]20200601_210750 by Joe malucci, on Flickr[/IMG]

50012273828_f194d8e691_z.jpg
[/url]20200602_201531 by Joe malucci, on Flickr[/IMG]

50013064602_faa995a5ef_z.jpg
[/url]20200602_201546 by Joe malucci, on Flickr[/IMG]

50012804551_ce032c9386_z.jpg
[/url]20200602_201556 by Joe malucci, on Flickr[/IMG]


50012274083_a61cd88b32_z.jpg
[/url]20200602_203720 by Joe malucci, on Flickr[/IMG]

50012273678_b3773b2c83_z.jpg
[/url]Screenshot_20200602-210102_Polaris Office by Joe malucci, on Flickr[/IMG]
 

Roccafellas

Member
Joined
May 7, 2017
Messages
357
Reaction score
0
Do you have anything else for a 6.4? I need two rocker assemblies


Sent from my iPhone using Tapatalk
 

Latest posts

Members online

Top