#1
|
||||
|
||||
![]()
I searched and didn't see a thread like this so if there is another one let me know.
Figured I would share a few pics of my farm, and I know there are other farmers on here, so post of pictures of your farm/ farms that you work on. Pictures working, stuck, broken etc etc Just a few from this spring Case IH 9350 with a 30' Krause Excellerator(vt tool) Just got done working some ground this spring ![]() Only 60 Acres of wheat and we twisted the feeder house drive shaft 100yrds into the first field, this was a fun one. ![]() Planting Double Crop soy beans Kinze 3650 16/31 Case IH335 ![]() My truck hooked to the seed tender with the 9350 in the back ground. Gotta love the KR farm truck ![]()
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#2
|
||||
|
||||
![]()
Love these pics I couldn't imagine farming that big
__________________
Weston S. 05-F250 lariat CCSB custom painted and airbrushed inside and out lil lift kit and other goodies FullForce Diesel-190/75,Sinister reg return,fuel lab pump custom filtration ,TSD sump,Empire Diesel Stage 1 CYL Heads,MPD manifolds-up pipes,Borg Warner S468 ,Banks CAC system,SCT=********,Edge cts,Twisted stage 2 Trans,custom cold air, 35 M16 interco's |
#3
|
||||
|
||||
![]()
I have a few hundred on the old site:
http://powerstrokenation.com/forums/...ad.php?t=54640
__________________
00' F350 XLT - SCSB, 4x4, 6-spd |
#4
|
||||
|
||||
![]()
Here are a couple of mine.
![]() ![]() ![]() ![]()
__________________
2011 6.7 F350 - Dads 2009 6.4 F350 - Brothers 2007 6.0 F350 - Mine 1997 7.3 F250 - Farm Truck ![]() |
#5
|
||||
|
||||
![]() Quote:
Sent from my Motorola Electrify using Tapatalk 2
__________________
08 F-250, 6.4
Last edited by 87jumpy; 06-28-2012 at 09:12 AM. |
#6
|
||||
|
||||
![]()
What dealer do you work at? This is one of the very first production run pieces, we got it spring of last year so far we like it.
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#7
|
||||
|
||||
![]()
ImageUploadedByTapatalk1340897187.704899.jpg
A rock that made it into our CR9060 last fall ImageUploadedByTapatalk1340897298.217531.jpg Our sprayer ImageUploadedByTapatalk1340897364.222064.jpg Combining beans the easy way ImageUploadedByTapatalk1340897428.008371.jpg Mower doing work ImageUploadedByTapatalk1340897491.403373.jpg My brother stuck |
#8
|
||||
|
||||
![]()
you guys have some big toys. i farm on the weekends and i thought my stuff was cool but its nothing comparied to what you guys have. Ill be headed down this weekend ill get some pics to post here
__________________
2011 CCLB King Ranch with some stuff done |
#9
|
||||
|
||||
![]()
ImageUploadedByTapatalk1340897753.090130.jpg
Loading manure ImageUploadedByTapatalk1340897815.704175.jpg Big baler ImageUploadedByTapatalk1340897868.273411.jpg View from cab ImageUploadedByTapatalk1340898024.608378.jpg Challenger and silage blade ImageUploadedByTapatalk1340898063.802742.jpg One for all the JD fans(not our tractor) |
#10
|
||||
|
||||
![]()
Wind damage from Irene last fall
ImageUploadedByTapatalk1340898447.155358.jpg ImageUploadedByTapatalk1340898473.037891.jpg ImageUploadedByTapatalk1340898502.737072.jpg Made combing a real bitch. |
#11
|
||||
|
||||
![]() ![]() How about some vintage equipment? ![]() ![]() ![]() ![]() Sadly I don't think I have any pics of any of the modern equipment doing anything..... probably not going to get any now that I have rented out everything and am looking to sell all the big hay equipment. Too bad too - running that windrower was one of the most relaxing things I think I ever got to do.
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#12
|
||||
|
||||
![]() ![]() ![]() ![]() ![]() Baby cotton ![]() ![]() Been harvesting for a week now ![]() ![]() ![]() ![]() Yeah, it was dry this year ![]() ![]() ![]() Not ours but still cool ![]()
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel Last edited by 09stroker; 06-28-2012 at 01:12 PM. |
#13
|
||||
|
||||
![]()
More soybean harvest
ImageUploadedByTapatalk1340909797.054497.jpg ImageUploadedByTapatalk1340909835.840347.jpg ImageUploadedByTapatalk1340909871.970892.jpg My rider ImageUploadedByTapatalk1340909919.884631.jpg |
#14
|
||||
|
||||
![]() Quote:
We had that happen a few years ago. We even tried combing one field at a 90* angle it was so bad. Ill have to dig up some pictures of that. We tired a corn reel that didn't hardly help at all, we could finially get something done after we put those screws/augers on the outer snouts like you have there
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#15
|
||||
|
||||
![]()
ImageUploadedByTapatalk1340910813.283260.jpgImageUploadedByTapatalk1340910845.275390.jpg
Not very good but a couple I took a few weeks ago . Sent from my iPhone using Tapatalk
__________________
1997 CCSB 4x4 . 4" lift , 18" Chrome Weld Evo's, 35" ATZ 4.10 . Swamps 250/100 Hybrids , Modded H2E 71/76 19cm . Arp Studs , Cometics , Electric Regulated Fuel , Comp 910's , Smith Bro pushrods , Swamps tunes , 7.3 Intercooler |
#16
|
||||
|
||||
![]()
Just a few more
Whoops, this is from last spring. I was trying to open up a wet spot so it would dry out faster. It didn't work out so well. ![]() Our freight shakers. ![]() My grandpa plowing his garden on a ferguson TO-20 and a two bottom plow. This is what he used to farm with. Big difference now. ![]() Me playing around - had to rotary hoe some beans a few years ago. This wasn't even popping the clutch, It was slowly taking off in 4th gear and it would carry like that for about 30ft. Had to use the brakes to steer going down the road. ![]()
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#17
|
||||
|
||||
![]()
Nice Oliver!
__________________
2019 F-250 CCSB XLT 6.7 2016 F-150 CCSB 3.5 Ecoboost Lariat (sold) 2013 F-250 CCSB 6.2 Lariat Ultimate (sold) 2008 F-250 6.4 CCSB Lariat - 625rwhp (sold) 2006 F-250 6.0 CCSB Big Black - JUNK (sold) 2004 F-250 6.0 ECSB - (sold) 1997 F-250HD 7.3 ECLB - (sold) |
#18
|
||||
|
||||
![]() Quote:
Sent from somewhere between the middle of the corn field
__________________
1999 F-350 CC SB Stock for now.. |
#19
|
||||
|
||||
![]()
Thanks guys, we have 2 1650's yet. They pretty much just run augers now. I would really like another one to turn into a "pulling" tractor, nothing over the top like the big guys run though.
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#20
|
||||
|
||||
![]()
My brother had an 1850 pulling tractor. He had it up around 200HP. The manure tank is an 8000 gallon, we run two like that. He couldn't compete with it either so it ran the manure pump until the motor died. Re had those mini augurs installed on the corn head last summer right after the storm
Last edited by qcfarmer; 06-28-2012 at 07:28 PM. |
#21
|
||||
|
||||
![]() Quote:
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#22
|
||||
|
||||
![]()
__________________
2014 F350 Platinum |
#23
|
||||
|
||||
![]()
I hate these threads and pics. They sooooooo make me wanna move!
![]() . |
#24
|
||||
|
||||
![]()
Hey hotrodtractor,
Is that a 820 I saw? Big fan of the Jonny popper!
__________________
SDRCM #666 2008 F-450 2012 F-450 KR |
#25
|
||||
|
||||
![]()
uploadfromtaptalk1340940292100.jpg
Only one we have.
__________________
SDRCM #666 2008 F-450 2012 F-450 KR |
#26
|
||||
|
||||
![]()
little of the seed corn
![]() sprayer ![]() truck and tool/fuel trailer ![]() KW ![]() ![]() just another morning on the farm ![]()
__________________
2013 F-350 |
#27
|
||||
|
||||
![]()
I'm a Deere Ag Field Svc Mechanic, it is interesting to see farms in different parts of the country. My hat is off to you guys, No Farms....No Food.
__________________
2009 F350,, CCSB 6.4L Powerstroke Diesel, Auto, H&S Mini Maxx, G#$rhead Tuning, S & B Intake, 5 inch exhaust, Edge CTS2 Insight, 777 Oil Bypass, AirDog2 4G. ![]() |
#28
|
||||
|
||||
![]() Quote:
![]()
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#29
|
||||
|
||||
![]()
And from other countries...
|
#30
|
||||
|
||||
![]()
I love this thread! I want an older tractor to restore soooooo bad!
__________________
2019 F-250 CCSB XLT 6.7 2016 F-150 CCSB 3.5 Ecoboost Lariat (sold) 2013 F-250 CCSB 6.2 Lariat Ultimate (sold) 2008 F-250 6.4 CCSB Lariat - 625rwhp (sold) 2006 F-250 6.0 CCSB Big Black - JUNK (sold) 2004 F-250 6.0 ECSB - (sold) 1997 F-250HD 7.3 ECLB - (sold) |
#31
|
||||
|
||||
![]() Quote:
__________________
SDRCM #666 2008 F-450 2012 F-450 KR |
#32
|
||||
|
||||
![]()
ImageUploadedByTapatalk1340994881.522333.jpg
Spring wheat coming along nicely |
#33
|
||||
|
||||
![]()
Last years planting with a Kinze 3600 and a JD 8330
![]() The fleet ![]() ![]() My truck on the Seed Tender ![]() JD 9670 with JD 30ft platform ![]() JD 9520 with the JD2210 Field Cultivator ![]() 9520 with the JD 512 disk ripper ![]()
__________________
2012 F-350 Lariat CCSB White Tri-Coat
20x10 Weld Dunes w/ 35-13.5/20 Nitto Ridge Grapplers No Limit, OUO traction bars, Carli 2.5" commuter kit w/ Fox 2.0 2008 F-350 Lariat CCSB DRW CM flatbed 285-70/17 Mastercraft MXTs |
#34
|
||||
|
||||
![]()
To 31 YNOT....do you guys haul down to STL. I think I seen that white Freightliner in at Center Eth. yesterday.
__________________
2012 F-350 Lariat CCSB White Tri-Coat
20x10 Weld Dunes w/ 35-13.5/20 Nitto Ridge Grapplers No Limit, OUO traction bars, Carli 2.5" commuter kit w/ Fox 2.0 2008 F-350 Lariat CCSB DRW CM flatbed 285-70/17 Mastercraft MXTs |
#35
|
||||
|
||||
![]()
Yes we haul to cahokia IL though, and we weren't hauling yesterday. The white one is an old Cox truck so there are a few running around that look similar to it. Ours has the painted front bumper and big polished fenders on it, plus all my grandpas tacky chrome lol
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#36
|
||||
|
||||
![]()
Last fall, bearing went out, at least it didn't happen going down the road
![]() Grain Dryer right after it got delivered ![]() Last fall with the dryer going at night, it sounds like a jet engine when you stand in front of it. Will dry 950 bushel an hr at 5 points. ![]() Tired out a new gleaner S77 last fall ![]() We have a new dealer in the area so they brought us this out to try as well. It was a beast and it was one of there smaller combines. 7mph though 170bu corn didn't even flinch this thing. I would never want to work on it though, belts and pulleys everywhere ![]() ![]()
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#37
|
||||
|
||||
![]()
Is that a Landoll that had the bearing go out?
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#38
|
||||
|
||||
![]()
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#39
|
||||
|
||||
![]()
Gotcha, there were a few landolls out here that were having regular wheel bearing failures. I think it ended up being bad hubs. Tolerances were out of spec
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel Last edited by 09stroker; 06-29-2012 at 03:37 PM. |
#40
|
||||
|
||||
![]()
Purchased a new landoll weather proffer III last year. Broke the main axle twice. Needless to say it's not here this year, traded on a DMI.
__________________
2013 F-350 |
#41
|
||||
|
||||
![]() ![]() This is my fully restored 1959 830. |
#42
|
||||
|
||||
![]()
Nice piece. The only tractor I regret selling in the sale was the 830I with the pony start..... that thing was cherry in original work clothes.... oh well - I know I'll get just as much attention riding around at shows and going to plow days once I restore the 630 LP Standard with all the trimming all around.
![]()
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#43
|
||||
|
||||
![]()
Thats a beautiful 830.
__________________
SDRCM #666 2008 F-450 2012 F-450 KR |
#44
|
||||
|
||||
![]()
I'll see if I can remember to get some pics from this side of the country.
__________________
2012 DPC Champion SDRCM #125 88mm Precision with a 62vgt 125% injectors major motor mods |
#45
|
||||
|
||||
![]() ![]() Thanks guys. I wish I could say I did the work myself but I had a guy restore it. He does absolutely beautiful paint work and I was very happy with it when I got it back. This picture is from when I dropped it off at his shop. Unfortunately the tractor had to go when I bought my house. Its currently a part of a collection in MO somewhere. |
#46
|
||||
|
||||
![]()
ImageUploadedByTapatalk1341062315.504799.jpg
ImageUploadedByTapatalk1341062371.568950.jpg ImageUploadedByTapatalk1341062387.905118.jpgImageUploadedByTapatalk1341062471.687373.jpg |
#47
|
||||
|
||||
![]()
A couple from the tornado producing storm the other day:
![]() 20120626-IMG_5579-2-rs by sniper_101, on Flickr ![]() 20120626-IMG_5600-rs by sniper_101, on Flickr ![]() 20120626-IMG_5556-rs by sniper_101, on Flickr From a couple weeks ago: ![]() 20120603-IMG_4519-rs by sniper_101, on Flickr ![]() 20120603-IMG_4523-rs by sniper_101, on Flickr A cool non-cropped, original-sized photo. A hair blurred and a bit of noise reduction, but the full size/original is pretty decent for a 50mm focal length: ![]() 20120604-IMG_4526 by sniper_101, on Flickr
__________________
00' F350 XLT - SCSB, 4x4, 6-spd |
#48
|
||||
|
||||
![]()
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#49
|
||||
|
||||
![]()
Another storm rolls yesterday. 3rd Severe storm in a week, 2nd Tornado warning issued for us this week. As soon as it touches 29*C (85*F) here, a storm brews somewhere, like clockwork. Not only that, but we get the heat, then the storm, which brings moisture. Then the next hot day the heat + moisture = another storm. It's a vicious cycle.
Anyway, no tornado, but we did get pea to larger than golf ball sized hail. Got my truck into the shop seconds before the hail dropped. Ruined the crop within a few miles unfortunately. ![]() 20120703-IMG_5734-2 by sniper_101, on Flickr ![]() 20120703-IMG_5735-2 by sniper_101, on Flickr ![]() 20120703-IMG_5774-2 by sniper_101, on Flickr ![]() 20120703-IMG_5781-2 by sniper_101, on Flickr ![]() 20120703-IMG_5787-2 by sniper_101, on Flickr ![]() 20120703-IMG_5795-2 by sniper_101, on Flickr ![]() 20120703-IMG_5830-2 by sniper_101, on Flickr The calm after the storm: ![]() 20120703-IMG_5805-2 by sniper_101, on Flickr ![]() 20120703-IMG_5887-2 by sniper_101, on Flickr Trapped in the shop:
__________________
00' F350 XLT - SCSB, 4x4, 6-spd Last edited by sniper_101; 07-04-2012 at 12:10 PM. |
#50
|
||||
|
||||
![]() Quote:
I'm seriously gonna come take a vacation on your farm one day. ![]() . |
#51
|
||||
|
||||
![]() Quote:
__________________
|
#52
|
||||
|
||||
![]()
Waiting on trucks to take the milo to the elevator and there was a storm rolling in.
![]()
__________________
2011 6.7 F350 - Dads 2009 6.4 F350 - Brothers 2007 6.0 F350 - Mine 1997 7.3 F250 - Farm Truck ![]() |
#53
|
||||
|
||||
![]()
When and where was this?
__________________
|
#54
|
||||
|
||||
![]()
This was yesterday morning down by Harlingen Texas.
__________________
2011 6.7 F350 - Dads 2009 6.4 F350 - Brothers 2007 6.0 F350 - Mine 1997 7.3 F250 - Farm Truck ![]() |
#55
|
||||
|
||||
![]()
^ thats a great picture. Nice equipment too.
__________________
-Jordan- 97 RCLB 7.3 5-Speed Valair ceramic single disk clutch, Full Force 238/100's, Adrenaline HPOP, Gear Head tuning, Marty's efuel, S&B, MBRP, Isspro, Mag-Hytec Full sound system: Kicker-Kenwood BILLET BADGES, 20x12's and 420's, On-Board Air, Few other cosmetics |
#56
|
||||
|
||||
![]()
Awesome pic better if it was red though...
Sent from somewhere between the middle of the corn field
__________________
1999 F-350 CC SB Stock for now.. |
#57
|
||||
|
||||
![]() Quote:
![]()
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#58
|
||||
|
||||
![]()
Thanks bud!
![]() Quote:
![]()
__________________
2011 6.7 F350 - Dads 2009 6.4 F350 - Brothers 2007 6.0 F350 - Mine 1997 7.3 F250 - Farm Truck ![]() |
#59
|
||||
|
||||
![]()
__________________
-Jordan- 97 RCLB 7.3 5-Speed Valair ceramic single disk clutch, Full Force 238/100's, Adrenaline HPOP, Gear Head tuning, Marty's efuel, S&B, MBRP, Isspro, Mag-Hytec Full sound system: Kicker-Kenwood BILLET BADGES, 20x12's and 420's, On-Board Air, Few other cosmetics |
#60
|
||||
|
||||
![]() Quote:
__________________
Konnor 2008 GMC Sierra 2500HD LMM Duramax -PPEI Tuning -EGR misplaced with LB7 up pipe -HSP Downpipe to 5" Magnaflow straight pipe |
#61
|
||||
|
||||
![]()
No pics of the farm, but here are 2 pics I have of one of our equipment/hay barns. This was back during the winter. Dad and I went by to crank the tractors and Bobcat for a bit. If you look hard enough, you can see my little brother acting like a goof ball on top of the hay.
![]() ![]()
__________________
Jeff Dodd 2012 Ford F-250 CC/SB |
#62
|
||||
|
||||
![]() Quote:
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() |
#63
|
||||
|
||||
![]()
__________________
|
#64
|
||||
|
||||
![]()
Yes - I kept a few pieces - including a few very rare pieces that many collectors would drool over no matter what condition....
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#65
|
||||
|
||||
![]()
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() |
#66
|
||||
|
||||
![]() Quote:
Sorry, multi-quote on iPhone isnt fun.
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() |
#67
|
||||
|
||||
![]()
ImageUploadedByTapatalk1341547849.932884.jpg
ImageUploadedByTapatalk1341547909.406825.jpg ImageUploadedByTapatalk1341547937.938582.jpg What I am doing right now, spraying insecticide to get rid of an army worm infestation before it becomes a problem. |
#68
|
||||
|
||||
![]() Quote:
|
#69
|
||||
|
||||
![]()
T7030 with autocommand. Going to bale some hay in a few hours with it, I will get some pics.
|
#70
|
||||
|
||||
![]()
Here you go
ImageUploadedByTapatalk1341601895.768044.jpg ImageUploadedByTapatalk1341601933.152536.jpg Our merger ImageUploadedByTapatalk1341601974.953296.jpg ImageUploadedByTapatalk1341602000.849473.jpg |
#71
|
||||
|
||||
![]()
That merger is pretty sweet looking deal. We don't have anything like that around me
|
#72
|
||||
|
||||
![]()
The ass end of our 4730 creeping in.
![]() Found a boost leak today. ![]() ![]()
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#73
|
||||
|
||||
![]()
I think that is the first black poly tank I have seen on a Deere. Is that a new thing?
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#74
|
||||
|
||||
![]()
Heres a few of our old stuff. Havent gotten any good pics in the past couple years of our newer stuff.
![]() ![]() Plow day at a buddies house. ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() We just bought a new 12 row planter this year and are looking to update combines. N6 is mine, we also have a TR88 New Holland.
__________________
2009 Ford F350 CCLB 6 speed 1997 Dodge 2500 1991 Dodge W350 1979 Ford F-350 Crew Cab Now the question.. 7.3 or 5.9 conversion? If you ate today, who cares if you liked it? Thank a Farmer! |
#75
|
||||
|
||||
![]()
What's with all the prison orange?!
|
#76
|
||||
|
||||
![]()
I honestly don't know. I assumed you could have always gotten either one. But it could be a new deal, it's a 2012.
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#77
|
|||
|
|||
![]()
I have a new found respect for John Deer after reading an article in Bloomberg weekly that about them titled american badass. They set a huge foreign sales goal and they wana be goto company around the world. They are really one of the greatest American Manufactures left.
|
#78
|
||||
|
||||
![]()
I watched the interview on bloomberg and it's pretty amazing how well they are doing and thier whole business strategy.
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#79
|
||||
|
||||
![]()
We like to get stuff done, thats the color that gets it done the best
![]()
__________________
2009 Ford F350 CCLB 6 speed 1997 Dodge 2500 1991 Dodge W350 1979 Ford F-350 Crew Cab Now the question.. 7.3 or 5.9 conversion? If you ate today, who cares if you liked it? Thank a Farmer! |
#80
|
||||
|
||||
![]()
Haha hey, whatever works for you guys! But my opinion which doesnt matter is I hate working on them haha but they run great. And the trans on the 7020 and whatever else is the same is a pain in the ass! Lol
|
#81
|
||||
|
||||
![]() ![]()
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() |
#82
|
||||
|
||||
![]()
__________________
2019 F-250 CCSB XLT 6.7 2016 F-150 CCSB 3.5 Ecoboost Lariat (sold) 2013 F-250 CCSB 6.2 Lariat Ultimate (sold) 2008 F-250 6.4 CCSB Lariat - 625rwhp (sold) 2006 F-250 6.0 CCSB Big Black - JUNK (sold) 2004 F-250 6.0 ECSB - (sold) 1997 F-250HD 7.3 ECLB - (sold) |
#83
|
||||
|
||||
![]()
Acfarmer nice Oliver!
Sent from somewhere between the middle of the corn field
__________________
1999 F-350 CC SB Stock for now.. |
#84
|
||||
|
||||
![]()
Last year, Clinton's wedding, LMAO!
![]()
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() |
#85
|
||||
|
||||
![]()
Then you need to update from the polaroid
![]()
__________________
2019 F-250 CCSB XLT 6.7 2016 F-150 CCSB 3.5 Ecoboost Lariat (sold) 2013 F-250 CCSB 6.2 Lariat Ultimate (sold) 2008 F-250 6.4 CCSB Lariat - 625rwhp (sold) 2006 F-250 6.0 CCSB Big Black - JUNK (sold) 2004 F-250 6.0 ECSB - (sold) 1997 F-250HD 7.3 ECLB - (sold) |
#86
|
||||
|
||||
![]()
It's called an app, I can make any picture look like that. Welcome to the age of technology.
![]()
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() |
#87
|
||||
|
||||
![]()
There are some great pictures in here, wished I could say that I have some equipment to add to this thread!
__________________
99.5 F350 PSD Dually |
#88
|
||||
|
||||
![]()
here's a few of ours:
![]() ![]() ![]() ![]() ![]() ![]() Farm down the road from us ![]()
__________________
-Kyle 2006 F350 6.0 CCLB DRW Lariat "Socially Awkward" ********, Holders Diesel, Retro Solutions, Pure Diesel Power, Screamin Eagle, Spyder Industries, Recon, Dirty Diesels KCCO! @yhmotorsports
|
#89
|
|||
|
|||
![]()
posting so i can view later
![]() |
#90
|
||||
|
||||
![]()
I so want to move.
. |
#91
|
||||
|
||||
![]()
Here are some of us doing wheat at the end of July.
ImageUploadedByTapatalk1348416774.724715.jpg ImageUploadedByTapatalk1348416803.078369.jpg Sub-soiler and Cat 765c ImageUploadedByTapatalk1348416844.289797.jpg ImageUploadedByTapatalk1348416872.609343.jpg We were doing beans until we got rained out yesterday but hopefully we get back out later this afternoon. |
#92
|
||||
|
||||
![]()
What depth are you running at?
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#93
|
||||
|
||||
![]()
with a 4 shank ripper behind that big of a tractor I bet they are 24"+ down
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#94
|
||||
|
||||
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() Just a few from around our farm! Sent from my iPhone using Tapatalk
__________________
2007 f250- 5" exhuast with 7" stack, Head studs, ******** tunes, guages, S&B intake, no limit cold side, egr ******, coolant fiilter, leveling kit, DIY traction bars, t4 mount s366, 205/150, alligator performance regulated return, DIY a1000, alligator performance sump |
#95
|
||||
|
||||
![]()
Around 24" but that is because we have tile drains and any deeper and you MAY hit one if you're unlucky. The tractor can definitely handle more but they bought that machine 30 years ago when the biggest tractor they owned was a White 2-180
|
#96
|
||||
|
||||
![]() Quote:
I'm very jealous of the quad track I want one bad. What is the floater spreader for? looks like something you would use in a rice field
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#97
|
||||
|
||||
![]()
Not a farmer but restoring this 1958 to35
![]()
__________________
Champion Transmission & Diesel Performance Phone-203-931-6178 old antiquated pos with some crap bw s467 fmw,irate rr/full fuel system,full force 350/200 injectors,irate SS gated t4 mount,arp studs,smith bro push rods,comp 910's, gen3, twin ipr's, ams1000 with co2, champion built 4r100,tuned by bill, etc |
#98
|
||||
|
||||
![]() I'm gonna need one of those tubes for the river next summer. ![]() . |
#99
|
||||
|
||||
![]() |
#100
|
||||
|
||||
![]()
Very nice. We have a TO30 that we use all the time around the farm yet for unload augers and it works great to move equipment around and push wagons in the shed.
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#101
|
||||
|
||||
![]()
Ya this one ran great. It is mainly used to mow fields with a brush hog. It mechanically was very solid. All we did to the heart or it was have the head rebuilt and a total reseal. Then it was completely stripped to bare metal.
__________________
Champion Transmission & Diesel Performance Phone-203-931-6178 old antiquated pos with some crap bw s467 fmw,irate rr/full fuel system,full force 350/200 injectors,irate SS gated t4 mount,arp studs,smith bro push rods,comp 910's, gen3, twin ipr's, ams1000 with co2, champion built 4r100,tuned by bill, etc |
#102
|
||||
|
||||
![]()
more pics. crappy cell pics.
![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]()
__________________
Champion Transmission & Diesel Performance Phone-203-931-6178 old antiquated pos with some crap bw s467 fmw,irate rr/full fuel system,full force 350/200 injectors,irate SS gated t4 mount,arp studs,smith bro push rods,comp 910's, gen3, twin ipr's, ams1000 with co2, champion built 4r100,tuned by bill, etc |
#103
|
||||
|
||||
![]() Quote:
The quad trac is great tons of power, we have an older one as well both are great tractors! The swamp buggys are home built we have really soft and wet fields in the winter and these are about the only things that make it with out getting stuck We farm 6000 acres which doesn't spun like much but we have a small window to get it done and our ground really sucks Sent from my iPhone using Tapatalk
__________________
2007 f250- 5" exhuast with 7" stack, Head studs, ******** tunes, guages, S&B intake, no limit cold side, egr ******, coolant fiilter, leveling kit, DIY traction bars, t4 mount s366, 205/150, alligator performance regulated return, DIY a1000, alligator performance sump |
#104
|
||||
|
||||
![]()
ImageUploadedByTapatalk1348457478.622500.jpgImageUploadedByTapatalk1348457487.785975.jpgImageUploadedByTapatalk1348457503.607063.jpgImageUploadedByTapatalk1348457519.119371.jpgImageUploadedByTapatalk1348457547.856835.jpg
|
#105
|
||||
|
||||
![]()
ImageUploadedByTapatalk1348457577.200949.jpgImageUploadedByTapatalk1348457587.972957.jpgImageUploadedByTapatalk1348457602.224567.jpgImageUploadedByTapatalk1348457623.758775.jpgImageUploadedByTapatalk1348457653.106942.jpg
|
#106
|
||||
|
||||
![]() |
#107
|
||||
|
||||
![]()
Good to see some other blue tractors Lamont! We have three Genisis tractors, an 89 and two 88's. Also used to have a TR96 until we traded it three years ago on the Cr9060
ImageUploadedByTapatalk1348516234.610605.jpg ImageUploadedByTapatalk1348516273.585787.jpg That is the 8970 stuck on some black dirt ImageUploadedByTapatalk1348516331.628662.jpg One of the 8870 hauling poop last spring |
#108
|
||||
|
||||
![]() ![]()
__________________
|
#109
|
||||
|
||||
![]() Quote:
__________________
1999 F-350 CC SB Stock for now.. |
#110
|
||||
|
||||
![]()
Blue is the only way to go! Haha but how do you like that draper head?
|
#111
|
||||
|
||||
![]() Quote:
Sent from my iPhone using Tapatalk
__________________
2007 f250- 5" exhuast with 7" stack, Head studs, ******** tunes, guages, S&B intake, no limit cold side, egr ******, coolant fiilter, leveling kit, DIY traction bars, t4 mount s366, 205/150, alligator performance regulated return, DIY a1000, alligator performance sump |
#112
|
||||
|
||||
![]()
Slight view of the grain setup.
__________________
01 F-350 Dually 7.3 PSD 6 Speed EBY Flatbed.. Farm truck ![]() 06 3500 Mega-Cab Smarty TNT-R, Firestone Ride-Rite Tow-Rig...For now ![]() |
#113
|
||||
|
||||
![]()
We use it in wheat and soybeans and it handles those two crops very well. We had some problems with leaking hydraulics but I think we've got them worked out now.
|
#114
|
||||
|
||||
![]()
Things like this make me wish i farmed. Im from Moline, home of john deere, im pretty partial to green. My grandpa retired building green combines, my sis is an engineer for deere and have some uncles that work for em too.
Keep the good pics comin' and keep workin hard to keep the food comin in! ![]()
__________________
08 F250 4x4 6.4 79 F250 4x4 521 BBF ... ![]() 90 Corolla SR5 (commuter beater) |
#115
|
||||
|
||||
![]() ![]() ![]() ![]() ![]() ![]()
__________________
2006 F250 ccsb 4x4 on 35's Hypermax 190/100's,66/74mm, Airdog Itp RR return, ARP studs, RCD trans ******** tuned (12.73@104) |
#116
|
||||
|
||||
![]()
Few more....
![]() ![]() ![]() ![]()
__________________
2006 F250 ccsb 4x4 on 35's Hypermax 190/100's,66/74mm, Airdog Itp RR return, ARP studs, RCD trans ******** tuned (12.73@104) |
#117
|
||||
|
||||
![]()
yes, that is my oldest daughter goofing around with her and her sister's mares..
![]() ![]() I invented horse drawn lawn furniture... I'll have to try and find that one.. ![]()
__________________
'99 7.3 Last edited by JLDickmon; 09-25-2012 at 07:03 AM. |
#118
|
||||
|
||||
![]()
A couple people have demoed them around me and they say it doesn't feed to well. But I don't know. How well does the wheels work for the cart? Cause at combine school for new holland we had trouble with them. But that one was also a prototype
|
#119
|
||||
|
||||
![]()
Our draper feeds sorghum alot better than the old auger type would more so when the stalks have more moisture. Feeds real even into the feederhouse.
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#120
|
||||
|
||||
![]()
We will be trying a draper this year in beans on an 8120 IH. I can't wait to run it
Sent from the ghetto
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#121
|
||||
|
||||
![]()
some old school farming
![]() ![]() ![]() ![]() ![]() you don't usually see this on a two cylinder ![]() ![]() some from the custom harvest crew I worked for ![]() ![]() ![]() ![]() ![]()
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#122
|
||||
|
||||
![]()
Wow that is awesome! I think they need some more grain karts though.
![]()
__________________
2011 6.7 F350 - Dads 2009 6.4 F350 - Brothers 2007 6.0 F350 - Mine 1997 7.3 F250 - Farm Truck ![]() |
#123
|
||||
|
||||
![]()
That John Deere collection......
![]()
__________________
2019 F-250 CCSB XLT 6.7 2016 F-150 CCSB 3.5 Ecoboost Lariat (sold) 2013 F-250 CCSB 6.2 Lariat Ultimate (sold) 2008 F-250 6.4 CCSB Lariat - 625rwhp (sold) 2006 F-250 6.0 CCSB Big Black - JUNK (sold) 2004 F-250 6.0 ECSB - (sold) 1997 F-250HD 7.3 ECLB - (sold) |
#124
|
||||
|
||||
![]()
the two cylinders are all my uncles I do have alot of hours in them all during the restoration ......would love to get my hands on the 820 one day
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#125
|
||||
|
||||
![]()
Hows that turbo on the two cylinder do?
__________________
08 F250 4x4 6.4 79 F250 4x4 521 BBF ... ![]() 90 Corolla SR5 (commuter beater) |
#126
|
||||
|
||||
![]()
How does that 820 do with some air shoved to it?
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() Last edited by Beans71086; 09-25-2012 at 03:16 PM. Reason: Treeed |
#127
|
||||
|
||||
![]()
it does alright we wanted it to run a gear higher at the local tractor pull which it does now ...runs about 9-10 psi boost .it has a very unique sound.the extra crankcase pressure makes it hard to keep from leaking oil everywhere
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#128
|
||||
|
||||
![]()
the 820 also had work done to the fuel system it did around 100 HP on a pto dyno before the turbo..after the turbo its stronger we just never got it back to the dyno to see how much stronger
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#129
|
||||
|
||||
![]()
Awesome, looks like a fun piece to own
__________________
08 F250 4x4 6.4 79 F250 4x4 521 BBF ... ![]() 90 Corolla SR5 (commuter beater) |
#130
|
||||
|
||||
![]()
Here is what is left of one my hay fields after a bailer caught on fire a month ago. Had these since we got the fire out just haven't had time to post them
ImageUploadedByTapatalk1348605921.042518.jpgImageUploadedByTapatalk1348605968.206385.jpgImageUploadedByTapatalk1348606000.894896.jpg
__________________
2011 CCLB King Ranch with some stuff done |
#131
|
||||
|
||||
![]()
found a few pics at a pull
![]() ![]() ![]()
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#132
|
||||
|
||||
![]()
I love that turbo 820 - I really regret selling the 830I that I had.... I've been bidding on 830 tractors that I find in the shape that I want pretty regularly ever since...... just no dice - they keep going for more than I think they are worth.... and it makes me think that I didn't get enough. lol
I happen to know that they also do very well on the bottle..... I won't name names or regions, but there is one running around an antique pull circuit that is stripped down to nothing with a bottle hiding in the factory air cleaner..... ![]()
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#133
|
||||
|
||||
![]()
Some shots from right now
ImageUploadedByTapatalk1348609035.531638.jpg ImageUploadedByTapatalk1348609071.814903.jpg |
#134
|
||||
|
||||
![]()
that does sound like fun ....im going to have to get an 820 or 830 one day when im a big kid haha
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#135
|
||||
|
||||
![]() Quote:
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#136
|
||||
|
||||
![]() Quote:
Here is my response to this post... ![]() ![]() ![]()
__________________
|
#137
|
||||
|
||||
![]() Quote:
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#138
|
||||
|
||||
![]()
Damnit! I miss the Midwest this time of the year.
__________________
-2010 F-350. SCLB XLT IDP Livewire, S&B cai, Flo-Pro ****** duals, dieselsit coolant filter, 2.5" ReadyLift with PMF Stage 2 5" traction blocks & bars. 35" Toyo M/T's on 20x10 -24 Fuel machined Kranks. SOLD -2014 F-350. SCLB LARIAT, TUXEDO BLACK, all stock...for now |
#139
|
||||
|
||||
![]()
I was thinking the same thing Paul.
![]()
__________________
Mike's Diesel Performance
734-385-4208 |
#140
|
||||
|
||||
![]() Quote:
Sent from the ghetto
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#141
|
||||
|
||||
![]()
Ours is a Honeybee but also heard nice things about the CNH one.
|
#142
|
||||
|
||||
![]() Quote:
Center drive is pretty nice and smooth tho... Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#143
|
||||
|
||||
![]() Quote:
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#144
|
||||
|
||||
![]() ![]() New Holland T8.390 pulling a 30ft Krause 4800 vt tool Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#145
|
||||
|
||||
![]()
Jumpy, could you send me the pictures and videos of the head please. We are thinking about getting a red machine and planning on getting a draper with it.
Sent from the ghetto
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#146
|
||||
|
||||
![]() Quote:
__________________
1995 F-250 7.3 -T/S 6 pos, straight pipe, 6637 1997 F-350 7.3 DRW- T/S 6 pos, bellowed up pipes, straight pipe, 6637 |
#147
|
||||
|
||||
![]()
CNH will have there own draper available soon. But yes up until now they have just been a MacDon with red plastic on the sides.
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#148
|
||||
|
||||
![]() Quote:
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#149
|
||||
|
||||
![]()
ImageUploadedByTapatalk1348788007.424761.jpgImageUploadedByTapatalk1348788021.484454.jpgImageUploadedByTapatalk1348788033.852260.jpg
TR99 research combine |
#150
|
||||
|
||||
![]() ![]() ![]() Ripping river bottom ground at 9 mph... Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#151
|
||||
|
||||
![]()
since you liked the others so much i dug up a few more
![]() ![]() ![]() ![]() ![]() my truck doing work ![]() my old truck ![]() all loaded ready to move ![]() ![]() ![]()
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#152
|
||||
|
||||
![]()
Do you work for someone or is that all your equipment?
__________________
2005 F350 DRW 4X4 Tow Boss 4in turbo back sold 2013 f150 sold 2014 ram 2500 6.7 4x4 |
#153
|
||||
|
||||
![]()
the two cylinders are all my uncles ......the big equipment is South Fork Harvesters in nebraska I worked for them back in 2009
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" |
#154
|
||||
|
||||
![]()
Just quickly tweaked these in LR, will have more to add when I have time to edit some.
![]() 20120907-IMG_7363r by sniper_101, on Flickr ![]() 20120823-IMG_7176r by sniper_101, on Flickr ![]() 20120911-IMG_7418r by sniper_101, on Flickr ![]() 20120906-IMG_7332r by sniper_101, on Flickr ![]() 20120912-IMG_7438r by sniper_101, on Flickr ![]() 20120927-IMG_7634r by sniper_101, on Flickr ![]() 20120927-IMG_7629r by sniper_101, on Flickr
__________________
00' F350 XLT - SCSB, 4x4, 6-spd |
#155
|
||||
|
||||
![]()
Anyone know how to get into custom harvesting in the west? I want to work for someone out there next spring through fall or longer
|
#156
|
||||
|
||||
![]() Quote:
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#157
|
||||
|
||||
![]()
Jumpy, what part of IL are you in and did you get my PM?
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#158
|
||||
|
||||
![]()
One day Ill own an 830, love those machines.
__________________
Kelly -08 F250, ECSB, Suncoast TC and tranny, Head studs, RCD pushrods/valve springs, IH pistons, Marty's A1000 lp fuel system, WDP egr ****** kit, Rudy's cold side, Elite 72mm, and MPD 15% nozzles. ![]() |
#159
|
||||
|
||||
![]()
Yes, I have to dig them off my old phone. I live about 40 miles north of St. Louis, but I am all over the state with work
Sent from my SAMSUNG-SGH-I747 using Tapatalk 2
__________________
08 F-250, 6.4
|
#160
|
||||
|
||||
![]()
__________________
2008 F-250 - Tuned, Leveled, and Tinted 2000 F-250 - Work in Progress |
#161
|
||||
|
||||
![]()
Well I work at a new holland dealership so I'm partial to blue but it doesn't matter what color it is
|
#162
|
||||
|
||||
![]()
/\ not a lot of crews out there that run NH mostly green and red ....I did a google search on custom harvest crews started calling and asking for apps .....If you dont mind running green South Fork Harvesters is a great crew to work with........if you don't have a CDL get it class A with doubles and triples endorsements for most crews .....and dont expect to get rich
__________________
1997 F250 EXCB SB 4X4 auto SD intercooler 175/100% sticks modded IDM "swamps" Last edited by EASH; 10-01-2012 at 07:01 AM. |
#163
|
||||
|
||||
![]()
Here is a good deal for an electric start 730 diesel Standard for all you guys wanting an 830.... sure its a little smaller - but its much more manageable and still just as fun to play with! http://www.ebay.com/itm/John-Deere-7...item35c01c4680
I really miss my 830 tractors this time of year...... I need to find a plow an break out the 730 LP Standard and let her sing.
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#164
|
||||
|
||||
![]() Quote:
|
#165
|
||||
|
||||
![]()
ImageUploadedByTapatalk1349180614.171264.jpg
Snapped this picture of an old gleaner yesterday |
#166
|
||||
|
||||
![]()
ImageUploadedByTapatalk1349301688.693275.jpgImageUploadedByTapatalk1349301697.330353.jpg
My buddy sent me pictures of their 9080 with the 12 row drago on it stuck today so I sent him this one ImageUploadedByTapatalk1349301746.000633.jpg 😀 |
#167
|
||||
|
||||
![]()
They didn't half ass getting that one stuck
__________________
Matt 2011 F350 6.7L CC/LB SRW 4x4 King Ranch White Tri Coat Midwest, NL, GH - OUO/Icon 3.5"/6" on 20x12 Weld Cheyennes w/ 35x13.50's |
#168
|
||||
|
||||
![]()
That happens once then you know sometimes it's just better to stop.
__________________
09 F-350 *******, Intake, Exhaust 4" Down Pipe No Limit LP Fuel System 2 Stage Nitrous System w/ Progressive Controller Batmowheel |
#169
|
||||
|
||||
![]()
Yeah I guess they wanted to try their new tracks out or something, beats me! But it's definitely in there good 😦
|
#170
|
||||
|
||||
![]()
Here are a few pictures I shot last night while I was cutting beans.
![]() ![]() ![]() ![]() ![]()
__________________
2012 F-350 Lariat CCSB White Tri-Coat
20x10 Weld Dunes w/ 35-13.5/20 Nitto Ridge Grapplers No Limit, OUO traction bars, Carli 2.5" commuter kit w/ Fox 2.0 2008 F-350 Lariat CCSB DRW CM flatbed 285-70/17 Mastercraft MXTs |
#171
|
||||
|
||||
![]()
Random pics from throughout the last year:
![]() ![]() ![]() ![]() ![]()
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#172
|
||||
|
||||
![]()
That's a beautiful sunrise! Or sunset
|
#173
|
||||
|
||||
![]()
__________________
2006 Dmax SAS - compounds, sticks, you know - the usual tow truck stuff. 2015 VW Jetta TDI SEL Videos If its not broke - add power until it is. RDRCM #45 |
#174
|
||||
|
||||
![]() ![]() ![]() That's how my day went lol Here's a pic from planting season ![]()
__________________
Daniel 17 CCSB fx4 King Ranch |
#175
|
||||
|
||||
![]()
That sucks dude. How bad did the harvester fair after that?
Sent from my DROID4 using Tapatalk 2
__________________
Mike's Diesel Performance
734-385-4208 |
#176
|
||||
|
||||
![]()
Oh it's fine I actually had to burn that cotton.
__________________
Daniel 17 CCSB fx4 King Ranch |
#177
|
||||
|
||||
![]()
Too wet to do beans so we started our high moisture corn.
ImageUploadedByTapatalk1349476577.461980.jpg ImageUploadedByTapatalk1349476603.953720.jpg |
#178
|
||||
|
||||
![]()
Man I love it out there!
__________________
2008 F-250 - Tuned, Leveled, and Tinted 2000 F-250 - Work in Progress |