Go Back   PowerStrokeArmy > Premium Vendors > Side Action Diesel

Reply
 
Thread Tools Display Modes
  #1  
Old 02-16-2016, 09:29 AM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 748
Default 6.0 common rail project/ Dave Byers

Just wanted to get some things out there to show you guys the improvements that we have been making with another one of our camshafts along with our new 68mm High pressure comp2 turbo setup!


Now I am sure you guys remember this cool swap Elite did a little while back what a neat project! For those of you that do not remember or have not seen this project here is the link to the old post to get you guys up to speed.-http://www.powerstrokearmy.com/forum...8564&showall=1

This truck ran well and met the needs of what Dave wanted to do with the truck. But soon dave wanted more as we all do right ??? lol

[IMG][/IMG]

This is our new 68 mm comp 2 turbo we had started out running a smaller version AKA 62mm comp1 in the reg cab about 2 years ago for testing and been very pleased with it for towing and making good broad quick power. We wanted to see how far we could take and use the vgt center section and make it driveable yet durable. So Dave allowed us to test it on his truck.
[IMG][/IMG]

Dave's truck was also fitted with our dual fueler system to try and tighten up the engine bay a little bit and help in case a trans failure was to occur making it easier to access the damper to rotate engine over to access converter bolts.
[IMG][/IMG]

As you can see here we use a single feed line for simplicity along with a full stainless steel bracket for long lasting finish and durability.
[IMG][/IMG]

The current setup consist of
our balanced 60% injectors
Comp 2 vgt-68mm turbo
83mm precision turbo
Pusher cam
Elite stage 1 heads If i'm not mistaken
Dave's truck made 773@1420ftlbs on a canned tow tune !!
[IMG][/IMG]



I'm sure you guys want to know where we ended up HP wise right ??? For those who said this cam wont make power past 3k...... well here is the results!!! And it made this under 50lbs of boost !
[IMG][/IMG]

This thing is still a blast to drive and still very very streetable!! Stay tuned for some track times come spring time as Dave plans on going to his local strip to rip it up!
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
  #2  
Old 02-17-2016, 08:49 PM
powerstroked08's Avatar
powerstroked08 powerstroked08 is offline
Colonel
Member's Gallery
 
Join Date: Sep 2012
Location: Pennsylvania
Posts: 3,423
Default

It only did 914 pfft. Weak. ...






__________________
2008 F-350 cclb ZF-6 speed
Just another white truck
Quote:
Originally Posted by Meniacal_Mark View Post
Time to dynamat the babies room lol
Quote:
Originally Posted by B585Ford View Post
Thats obviously for safety....ya never know when you might be going through an intersection and some idiot runs a light...anything under 1000HP and your toast.
  #3  
Old 02-17-2016, 09:20 PM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 748
Default

Lol damn u brandon !
yeah wonder what it would do on a 350file....hmmm
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
  #4  
Old 02-17-2016, 09:24 PM
6.4powerstroke08's Avatar
6.4powerstroke08 6.4powerstroke08 is offline
Corporal
Member's Gallery
 
Join Date: Aug 2013
Location: Montrose,pa
Posts: 95
Default

Brandon 914 is something you will never see ....haha heck, you'll be lucky to ever see 700 in that roach. Brenton i'm very impressed with the build and all your products!!

Sent from my SM-G900V using Tapatalk
__________________
08 f250, cclb, H&S, no limits intake, custom traction bars, egr& *** ******d, recon lighting, alradco radiator
  #5  
Old 02-17-2016, 09:50 PM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 748
Default

Thanks bud I appreciate it !
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
  #6  
Old 02-17-2016, 11:20 PM
powerstroked08's Avatar
powerstroked08 powerstroked08 is offline
Colonel
Member's Gallery
 
Join Date: Sep 2012
Location: Pennsylvania
Posts: 3,423
Default

Quote:
Originally Posted by 6.4powerstroke08 View Post
Brandon 914 is something you will never see ....haha heck, you'll be lucky to ever see 700 in that roach. Brenton i'm very impressed with the build and all your products!!

Sent from my SM-G900V using Tapatalk
You mother****er! Hahaha
__________________
2008 F-350 cclb ZF-6 speed
Just another white truck
Quote:
Originally Posted by Meniacal_Mark View Post
Time to dynamat the babies room lol
Quote:
Originally Posted by B585Ford View Post
Thats obviously for safety....ya never know when you might be going through an intersection and some idiot runs a light...anything under 1000HP and your toast.
  #7  
Old 04-10-2016, 09:49 AM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 748
Default

As we're on our way back from Rudy's Diesel Season Opener, I just wanted to let anyone who is interested or has been following up on Dave buyers build know that on the dyno at the event truck made 1152 HP with 1820 Tq!!!



I would also like to congratulate NPD and all the guys on there 1662 HP nitrous run!
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
  #8  
Old 04-10-2016, 11:07 AM
powerstroked08's Avatar
powerstroked08 powerstroked08 is offline
Colonel
Member's Gallery
 
Join Date: Sep 2012
Location: Pennsylvania
Posts: 3,423
Default

Great job Brenton! Sounds like she's running good! 1152 on fuel and 1820 torque is getting it done! And on the same dyno that mpd laid down 1662!
__________________
2008 F-350 cclb ZF-6 speed
Just another white truck
Quote:
Originally Posted by Meniacal_Mark View Post
Time to dynamat the babies room lol
Quote:
Originally Posted by B585Ford View Post
Thats obviously for safety....ya never know when you might be going through an intersection and some idiot runs a light...anything under 1000HP and your toast.
  #9  
Old 04-10-2016, 11:12 AM
powerstroked08's Avatar
powerstroked08 powerstroked08 is offline
Colonel
Member's Gallery
 
Join Date: Sep 2012
Location: Pennsylvania
Posts: 3,423
Default

Is this still running the 60's?
__________________
2008 F-350 cclb ZF-6 speed
Just another white truck
Quote:
Originally Posted by Meniacal_Mark View Post
Time to dynamat the babies room lol
Quote:
Originally Posted by B585Ford View Post
Thats obviously for safety....ya never know when you might be going through an intersection and some idiot runs a light...anything under 1000HP and your toast.
  #10  
Old 04-10-2016, 01:11 PM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 748
Default

Quote:
Is this still running the 60's?
Yes sir !! thing is an absolute blast !!
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
  #11  
Old 04-11-2016, 04:13 PM
Straubtech Straubtech is offline
Sergeant
Member's Gallery
 
Join Date: Sep 2015
Posts: 106
Default

That is AWESOME man!!!!!!!!!! And congrats on the 7.20 in the house truck!!!!!!!
  #12  
Old 04-11-2016, 05:37 PM
sideactiondiesel's Avatar
sideactiondiesel sideactiondiesel is offline
Lieutenant
Member's Gallery
 
Join Date: Feb 2012
Location: Richmond IL
Posts: 748
Default

Quote:
That is AWESOME man!!!!!!!!!! And congrats on the 7.20 in the house truck!!!!!!!
Thanks Chris ! Had a good time we did 7.20@97 in the 1/8 with the reg cab so I was happy! going to run some 1/4 times up here during the week then change the setup and go from there.

But as far as dave goes he was speechless I feel the dyno was generous.. but was good to compare it to some east coast power was fun to sit back and enjoy the event
__________________
Brenton Lindenberg
Side Action Diesel Performance
1-815-703-6652
www.sideactiondiesel.com


6.4 FBD blocks

6.4 triple turbo kits

6.4 dual fuel kits

6.7 replacement and upgraded turbo's


Along with Allison,Dodge, Ford Converters and full transmission builds

Quality products
" The bitterness of poor quality remains long after the sweetness of low price is forgotten"
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 09:18 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2019, vBulletin Solutions, Inc.

Designed by Military Ltd