VGT Compound Build

Six_Sloww

New member
Joined
Dec 5, 2013
Messages
2,574
Reaction score
0
Location
Southeast MI
So some of you know I bought Morgan@Midwest's 6.7 regular cab last year. I think the truck was for sale for about 30 seconds when I decided I had to buy it. Sold my 6.0 that Wednesday and drove down to Athens IL that Friday to pick it up.

b31d51599174cfa60aec5d94248ece92.jpg


I loved the idea that the truck was "done". The plan was to just enjoy a well built, heavily modified truck instead of always tinkering like I did with my 6.0.

For anyone that wasn't following the previous build:

Balanced rotating assembly
R&R rods
De-lipped and coated pistons
Ported heads
HD springs
HD retainers
HD pushrods
Ported intake
Extreme studs
Midwest dual fueler kit
Stroker cp4
Fleece cp3k
Exergy 100% injectors
Barder 6670R
Tial Wastegate
Midwest intercooler piping
No-limit intercooler
No-limit intake
2 stage NX progressive kit
Midwest 6R140 and PI modded converter
OUO traction bars
And probably stuff I don't even know about..

As you can imagine the truck runs quite well and likes nitrous.. It's made well north of 1k on both stages and makes 750 on fuel only. Stupid fun to drive and just a beautiful truck

1a7752172c0fad76b05b6d750f247edd.jpg


I daily drove the truck up until it was time to put it away for winter, didn't do anything to it besides add an airdog 165 4g to it..

e9f390474efffd7581ceddbd2a7d93cc.jpg


Awesome pump, the 4g is quieter than the oem pump and has held up to the biggest fuel only tunes.

After sitting all winter I decided nitrous is cool and it'll stay on the truck but there's a lot of street action around here and I'd hate for some kid in daddy's BMW to try me on the highway and I don't have the bottle on!

Well Morgan's new sales guy (Jared) talked me into one of these guys..

2a2af5164e439f86d77f5f1f4104bb63.jpg


Precision Gen 2 8891

I drove the truck down a couple of weeks ago and after not even 6 months after leaving the shop it's back at Midwest Diesel & Auto gaining a turbo!

699faabd52125f7362cc3a575830c701.jpg


efefd09f8b4b72ff706cce218f67a1ae.jpg


a86965f2e18147b931d57451396fa195.jpg
 

Black AOD

Well-known member
Joined
Aug 6, 2014
Messages
3,466
Reaction score
75
Location
Ohio
One of these is not like the other!

uploadfromtaptalk1458262200763.jpg

Awesome to see a thread Cody. Can't wait to see this Truck (again) but with compounds at TS.

Sent from my VS990 using Tapatalk
 

Six_Sloww

New member
Joined
Dec 5, 2013
Messages
2,574
Reaction score
0
Location
Southeast MI
Oh yeah, it's also getting some ALA's, Track rod joint upgrade, and front truss with fox stabilizers courtesy of Jared and OUO
 

Six_Sloww

New member
Joined
Dec 5, 2013
Messages
2,574
Reaction score
0
Location
Southeast MI
It should have enough to split the block as it sits. I think the 100's can flow well over 1500 hp, if I run out of injection pump I can always go to a 12mm on the belt.

Only thing that that may happen on the fuel side is I may add another airdog so each pump is fed separately.. We shall see though.
 

joe d

New member
Joined
Mar 12, 2016
Messages
770
Reaction score
0
Location
monroe mi
Hmm im down bue Ohio mi line. Sounds like its going ro be a rocket ever take it out to Milan and run it?
 
Top