Go Back   PowerStrokeArmy > Power Strokes > 6.0 Aftermarket

Reply
 
Thread Tools Display Modes
  #1  
Old 07-11-2018, 08:57 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default 6.0 Part Out

Lots of good parts for sale. Pm me for prices or questions. Everything is new or used with a few hours only.

Aeromotive A1000 pump
Aeromotive Fuel Regulator
River City Diesel BFSump
Western Diesel Filter Mounts w/cat filters
Derale 40 row oil cooler
Improved Racing Remote filter mount w/thermostat
Improved Racing high flow inline oil thermostat
Lots of extra Fragola Fuel and oil lines with fittings
BPD turbo oil feed block
BPD oil cooler ****** plate with lines/fittings
BD Diesel intake elbow and cold side pipe
Mishimoto transmission cooler
ISSPRO pyro guage
Dual boost/drive pressure guage
Autometer hpop guage
River City Thumper 1 hpop
BPD billet water pump

Also have a 6.0 block, 30 over, elite diesel coated delipped pistons, heads with full valve job, high rate springs, billet pushrods and warren 175/75 injectors

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #2  
Old 07-12-2018, 06:30 AM
ncollins64's Avatar
ncollins64 ncollins64 is online now
Colonel
Member's Gallery
 
Join Date: Nov 2012
Location: winchester springs, tn
Posts: 3,820
Default

Rules say we must post prices. That being said I’d be interested in the oil cooler kit from bulletproof diesel.
__________________

2013 F350 CCSB PLATINUM

08 F-350 CCSB 950/1493
Midwest Diesel, Elite Diesel, RCD, OUO, No Limit Fab, PMF Fab
1997 F-350 7.3, srw, rclb, 4wd, 5speed (work truck)
Past rig: 2000 F-350 ccsb, 1100 hp 6.7 cummins
  #3  
Old 07-12-2018, 07:21 AM
Jtreece's Avatar
Jtreece Jtreece is offline
Corporal
Member's Gallery
 
Join Date: Jun 2018
Location: Kansas
Posts: 83
Default

How much for external oil cooler?
__________________
04 F350 CCLW SRW, 35's, CM skirted flatbed, Diablo T1000, SCT3, Studded, *******, 4", Stage 2 Tranny, blue spring, wicked wheel, loves to eat Hondas.
  #4  
Old 07-12-2018, 07:35 AM
co04cobra's Avatar
co04cobra co04cobra is offline
Sponsor
Member's Gallery
 
Join Date: May 2011
Location: WV
Posts: 2,815
Default

I’d be interested in the hpop and the fuel and oil fittings. Curious why the part out? Pm me some prices please.
__________________
00 cc/sb zf6 F250- Some stuff done always more to do-Fuel 300/200s Air-Garrett 68/94-Oil SRP 1-Airdog to Fuellab

97 cc/sb- zf-5- Work in progress. PMF rsk w/ SD axles. 66 turbo, E fuel, 230/100s. SB DD clutch.

08 cc/sb - Elite bottom end - 2 fuelers, 59vgt/78atmo, Midwest 100% nozzles and coated heads etc....

www.teddavisautos.com

Many parts available for super duty trucks PM me.
  #5  
Old 07-12-2018, 08:28 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by ncollins64 View Post
Rules say we must post prices. That being said Id be interested in the oil cooler kit from bulletproof diesel.
Ill pm you

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #6  
Old 07-12-2018, 08:35 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by co04cobra View Post
Id be interested in the hpop and the fuel and oil fittings. Curious why the part out? Pm me some prices please.
Had a falling out with my mechanic. I got screwed cause he took parts off my truck and broke some and tried to bull**** his way out of everything.its a long story. Dont have much money to finish it or try and fight it in court so im down to heap of parts and a no vehicle. Ill pm you

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #7  
Old 07-12-2018, 09:23 AM
Jtreece's Avatar
Jtreece Jtreece is offline
Corporal
Member's Gallery
 
Join Date: Jun 2018
Location: Kansas
Posts: 83
Default

man that sucks, looks like you were almost done too....
__________________
04 F350 CCLW SRW, 35's, CM skirted flatbed, Diablo T1000, SCT3, Studded, *******, 4", Stage 2 Tranny, blue spring, wicked wheel, loves to eat Hondas.
  #8  
Old 07-12-2018, 11:05 AM
Zeb Zeb is offline
Sergeant
Member's Gallery
 
Join Date: Apr 2018
Location: Downtown Marrowbone Ky
Posts: 118
Default

I would be interested in the A1000, fuel pressure regulator, filter bases and filters, hpop gauge, and Improved Racing thermostat if it is the 215* one. Call, or text, if you care to. Two70-855-946eight. Thanks!
  #9  
Old 07-12-2018, 01:48 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by Zeb View Post
I would be interested in the A1000, fuel pressure regulator, filter bases and filters, hpop gauge, and Improved Racing thermostat if it is the 215* one. Call, or text, if you care to. Two70-855-946eight. Thanks!
Ill give you a call after work today

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #10  
Old 07-12-2018, 02:11 PM
Zeb Zeb is offline
Sergeant
Member's Gallery
 
Join Date: Apr 2018
Location: Downtown Marrowbone Ky
Posts: 118
Default

Appreciate that.
  #11  
Old 07-12-2018, 03:02 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

High Flow thermostat, A1000, regulator, filter bases and hpop guage are sold pending funds

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #12  
Old 07-12-2018, 05:00 PM
08REDSLED's Avatar
08REDSLED 08REDSLED is offline
Corporal
Member's Gallery
 
Join Date: Oct 2014
Location: Linwood, KS
Posts: 76
Default

Interested in the elbow/cold side pipe, and EGT gauge
__________________
08 F250 CCSB 4x4 - AFE Stage 2, 4" Turbo back, Minimax with GH tunes, EDE Stage 3 trans, DPC triple disk, 3" lift, 37x13.5 Trail grapplers - Broken trans after 15k
04 F350 ECLB 4x4 - 6.0l - 3.5" DP, 4" DP back, blue spring, EGR and coolers still intact, original oil cooler still has good deltas even - 285k-going strong
15 Explorer Sport AWD - Wife's rig
00 Solara - Work car, 300k-abused daily
  #13  
Old 07-12-2018, 05:44 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by 08REDSLED View Post
Interested in the elbow/cold side pipe, and EGT gauge
Pm'd

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #14  
Old 07-13-2018, 08:23 PM
mstng5point0 mstng5point0 is offline
Sergeant
Member's Gallery
 
Join Date: Sep 2014
Location: Salem, Nh
Posts: 106
Default

How much for the injectors?
__________________
2007 Harley F250 tuned, ******d, studded, straight piped
  #15  
Old 07-13-2018, 09:47 PM
Jsexton's Avatar
Jsexton Jsexton is offline
Sergeant
Member's Gallery
 
Join Date: Jun 2016
Location: Alabama
Posts: 108
Default

Love the dream.... their are so many diesel shops out their but the issue is their just shad tree mechanics. Same issue with mine paid shop to do the work they said they can do, come to find out they were a bunch of dumbasses. Their are a good number of vendors on here but if your not in their area it's no good... I hate it cause their good money to be made with honest shops but every one is after that quick dollar. Anyway best of luck do what I did just learn the machanics your self and go for it......END THE END IT WILL BE CHEAPER FOR YOU AND WORTH A WHOLE LOT MORE.....
  #16  
Old 07-14-2018, 11:25 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by mstng5point0 View Post
How much for the injectors?
$1400 shipped, 175/75s brand new premium spool valves and solenoids from wdi

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #17  
Old 07-14-2018, 11:33 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by Jsexton View Post
Love the dream.... their are so many diesel shops out their but the issue is their just shad tree mechanics. Same issue with mine paid shop to do the work they said they can do, come to find out they were a bunch of dumbasses. Their are a good number of vendors on here but if your not in their area it's no good... I hate it cause their good money to be made with honest shops but every one is after that quick dollar. Anyway best of luck do what I did just learn the machanics your self and go for it......END THE END IT WILL BE CHEAPER FOR YOU AND WORTH A WHOLE LOT MORE.....
Couldn't agree more. I wish i did everything myself instead but at the time it didn't seem feasible. I thought this mechanic was knowledgeable and good hearted but that couldnt have been farther from the truth. He pushed me into getting way more than i needed and lied through his teeth more times than i can count. All you can do is live and learn and move on. Ill be posting a shop beware sometime about my experience and hopefully other people can get some valuable information from it

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #18  
Old 07-15-2018, 11:23 PM
Mikeke Mikeke is offline
Private
Member's Gallery
 
Join Date: Mar 2017
Posts: 16
Default

Interested in fuel system with regulator
  #19  
Old 07-19-2018, 10:12 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by Mikeke View Post
Interested in fuel system with regulator
Sold pending funds right now

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #20  
Old 07-20-2018, 03:32 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Bump

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #21  
Old 07-24-2018, 09:46 AM
superduty4x4's Avatar
superduty4x4 superduty4x4 is offline
Lieutenant
Member's Gallery
 
Join Date: May 2011
Location: Newport, WA
Posts: 969
Default

How much for the water pump?
__________________
05 F350 CCLB 4x4 PSD
97 F350 CCLB 4x4 PSD - sold

Quote:
Originally Posted by Powerstroked162 View Post
WhiteduallyIL is a rubber penis
  #22  
Old 07-24-2018, 05:49 PM
shmoozer's Avatar
shmoozer shmoozer is online now
Major
Member's Gallery
 
Join Date: Jul 2012
Posts: 1,131
Default

Would you by chance be willing to sell the ABS pump?


Sent from my iPhone using Tapatalk
__________________
"I have 2 speeds, full throttle and reverse....even reverse is pretty fast" -South Mouth
  #23  
Old 07-24-2018, 08:59 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by superduty4x4 View Post
How much for the water pump?
$250 shipped

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #24  
Old 07-24-2018, 09:01 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by shmoozer View Post
Would you by chance be willing to sell the ABS pump?


Sent from my iPhone using Tapatalk
Yes id be willing to sell that

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #25  
Old 08-02-2018, 10:21 AM
Zeb Zeb is offline
Sergeant
Member's Gallery
 
Join Date: Apr 2018
Location: Downtown Marrowbone Ky
Posts: 118
Default

I got the parts. Everything was packaged nicely. Thank you Alex!!
  #26  
Old 08-02-2018, 11:53 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

You're very welcome.

Still have plenty of parts for sale
Quote:
Originally Posted by Zeb View Post
I got the parts. Everything was packaged nicely. Thank you Alex!!
Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #27  
Old 08-06-2018, 11:31 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Bump

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #28  
Old 08-06-2018, 08:09 PM
Amicus Amicus is offline
Private
Member's Gallery
 
Join Date: Jan 2016
Posts: 43
Default

How much for the elbow and cold side pipe?
  #29  
Old 08-07-2018, 09:13 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by Amicus View Post
How much for the elbow and cold side pipe?
$200 shipped

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #30  
Old 08-13-2018, 06:13 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Bump

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #31  
Old 08-19-2018, 07:27 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Bump

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #32  
Old 08-20-2018, 07:43 PM
07F350_6.0 07F350_6.0 is offline
Private
Member's Gallery
 
Join Date: Nov 2017
Location: Burlingham NY
Posts: 28
Default

Pms sent
  #33  
Old 08-21-2018, 12:51 PM
8WR_ZJ 8WR_ZJ is offline
Lieutenant
Member's Gallery
 
Join Date: Jun 2013
Posts: 671
Default

Did the oil cooler and thermostat parts sell?

Sent from my SM-G965U using Tapatalk
__________________
2015 F-350 CCLB 4WD, S&B, GH SOTF, 4" FLOPRO, FUN SWITCH.
  #34  
Old 08-21-2018, 02:55 PM
GotStroke's Avatar
GotStroke GotStroke is offline
Sergeant
Member's Gallery
 
Join Date: Sep 2013
Location: Haleyville, Al.
Posts: 189
Default

Price for the BPD block off plate with lines and fittings, turbo feed? Pyro still available/price?


Sent from my iPhone using Tapatalk
__________________
2015 F350 CCLB All Show No Go... (WARRANTY)

(RIP) 2010 6.4 F250 CCSB
No Limit CAI, No Limit Cold Side Pipe and Intake Elbow. Riff Raff boots, Elite TowPowers 71/59, Elite Z-max fully ported Intake, Elite 6.0 Manifolds with custom Up-pipes, 4" downpipe, 5" Diamond Eye 6" Diamond Eye Black Chrome tip, MPD CCV, ALRADCO Intercooler and Radiator, 4.10 swap. 6"lift with traction bars with 35s.
  #35  
Old 08-28-2018, 01:14 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Oil cooler still available and thermostat/filter piece still available

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #36  
Old 08-28-2018, 01:17 PM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Quote:
Originally Posted by GotStroke View Post
Price for the BPD block off plate with lines and fittings, turbo feed? Pyro still available/price?


Sent from my iPhone using Tapatalk
BPD oil cooler ****** plate with fittings, sensors, lines and turbo feed $380

Pyro still available $180

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #37  
Old 09-01-2018, 10:39 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Bump

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
  #38  
Old 09-22-2018, 06:20 PM
Extended Power's Avatar
Extended Power Extended Power is offline
Major
Member's Gallery
 
Join Date: May 2011
Posts: 2,168
Default

Got any pictures of the BPD cooler plate, and whatever goes with it?

I'm pulling my engine this fall/winter, and need some more upgrades besides a different cam, and secondary turbo.

If you want, text them to me. Four zero 3, 5 0 two, zero seven two 6
__________________
2003 F350 King Ranch ccsb 4x4
793hp fuel only
12.2 @ 113.06mph
  #39  
Old 09-25-2018, 11:18 AM
aroache's Avatar
aroache aroache is offline
Private
Member's Gallery
 
Join Date: Jul 2016
Location: Hanson, MA
Posts: 37
Default

Truck sold

Sent from my SM-G955U using Tapatalk
__________________
06 F-250 CCSB - .30 Over - Coated Delipped Pistons - RCD Pushrods - Stage 2 Cam - #120 springs - Kc Stage 2 - Warren 175/75 - Custom Fuel/Reg Return
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -6. The time now is 03:40 PM.

 

Powered by vBulletin®
Copyright ©2000 - 2018, vBulletin Solutions, Inc.

Designed by Military Ltd