Recent content by 93F350

Alright looks like ill definetly be selling my old truck. I did find a 2007 F-350 crew cab long bed 6.0 king ranch for only 7000 in good shape so ill take a look at something like that

Heres my next question. I already have a 1993 F350 cc lb should putting some good aftermarket sound insulation and better seats make it as quiet and comfortable as the newer trucks. Of course ill also have to put the 05 up axle in it and swap to hydroboost brakes. Is it worth trying to restore...

Tuning wont be much of a problem considering the engine ill be using is a 12v cummins

Looks like ill have to start with an auto truck as the manual trans trucks are really rare from 05 and up. Ill be using an eaton fuller fso-8406 so a little bit of massaging and cutting may be required anyway.

Alright ill look for at least an 05. Is there much of a difference between the 05-07 and the 08-10

How was the frame and cab on the 99-04 trucks compared to the 05-07 and 08-10 trucks. Do the cabs have any better sound proofing, better AC design, more comfortable design. Im wanting to do a cummins swap so looking at which generation truck i should start with. Looking to get a manual truck to...

Iv put a 2008 f250 axle in my 1993 f350 and I'm trying to figure out what to do with the master cylinder. Should I just use my current 1 1/8 bore master that's in great shape and just remove the proportioning valve or should I step up to the F-super duty master with the 1 5/16 bore.

So eventually I'll be putting a Cummins into a ford and not sure witch trans to use I know the zf-6 is strong and it's a lot easier to use but just how long would it last behind a 600hp compound turbo cummins. The fuller fso 8406 will never brake as it's very beefy but it'll be a lot more work...

Will an aam 11.5 axle bolt onto a 1993 f350 I believe the dodge axles had the Speedo sensor in the axle and it works but I'm not for sure. Are the leaf spring perches the correct width what about the u joint.

Is there any write ups or videos on doing this. I find a lot with just the fenders and grill but not with the core support

Will the front end of a 08-10 truck swap onto the 99-07 trucks and by front end I mean the whole core support and everything. The 08-10 truck have a few extra inches of room in the engine bay length wise because of the core support design and I would like to put it on an older truck. I plan on...

The front axle I would just get a 2013 or newer for the brakes. The rear axle from 10 and older is what I wonder if it could be converted to the 2013 or newer brakes. There seems to be a large difference 14.3 vs 13.6 diameter and 1.5 vs 1.3 thick. Better to have to much brakes then just good enough.

Alright that's the route I'll go then thanks for the help

Alright I'll just use the 08-10 rear axle. Would the brakes from the 13 axles work on the 08-10.

Is it the same as doing the 05 axle swaps is there anything different. I heard the 2011 and newer axles don't have the speedometer port so how would I get the Speedo to work.