Recent content by evans213

Don’t guess you want to sale anything....

PM sent

Well I'm waiting on my LE8700 oil to arrive before I start tearing stuff apart. I did the end link and sway bar bushings and still noticed a slight clunking noise. Jacked the front end up and found that the ball joints on the drivers side were shot. Replaced those with Moog's and the truck...

Well, I believe I have narrowed the looping problem down to the ICP, as it runs smooth as silk constantly with it unplugged. It will kind of loop when coming down to a idle, RM meter doesn't bounce, the motor just loops a little coming down. I have a new IPR I am going to put on it as well...

Thank you. Believe it or not but the truck came out of West VA, so it’s seen plenty of salt. It only has very minor rust(just bubbling) above the rear wheels and the passenger side rocker panel is starting to rust. I have been detailing the inter this morning and it is in great shape. The...

[/URL][/IMG]

I will check the GPR with a digital meter today, used an older gage style meter that had the arm. So so probably not real accurate down to the 1/4 volt, lol. It is a white Roger(stancher) GPR, PO said he put it in along with new injectors and GP about a year and half ago. But that doesn't...

Checked GPR this afternoon, it has power on one side with the key off and power to the other side with the key on. So it should be good. The only way to check the VC gasket is to remove the valve covers correct? HPOP gasket is leaking, oil cooler appears to have a leak, and the pedestal O...

Do you still have the IPR's??

Thanks for the response. When cranking the truck on cold start there is just a little (barely noticable) haze of smoke. Once started the truck takes maybe a minute to clear up and runs great and no blue smoke, just a puff of black.

So after being out of the 7.3 (and any other diesel) world, Im back in!!! I picked up a 2002 CCSB 4x4 7.3 has a TS 6 position chip, and bully dog air filter and housing(I know nothing about them are they good or bad? I may order a 6637 kit like I used to have on my 97). The original motor...

OK update......got the truck completely converted over to manual. I am researching clutchs and Nope to order one in the next day or so. I am still waiting on the tranny to get done at shop. I got all my body parts in from lmc and got the 6.0 intercooler put on the front. I just need some...

PM SENT!!!! INTERCOOLER PIPES NEEDED ASAP!!!!

Got the bracket built for the e fuel. All I need is fuel hose, I am going to use the factory lines running along the frame and use the factory lines going to the back of the heads. What size hose do I need to pick up? Also who has a good write up on mounting an intercooler? I have looked...

I will be running a 6.0 cooler. Everyone that makes them won't reply back to emails. I have a set of super duty pipes but read somewhere they won't work withoutcutting them and using a lot of boots. And I really don't wanna do that.