Recent content by James W

  1. J

    KC Turbos 6.4 turbo testing

    These threads are really informative, and your results super impressive!
  2. J

    Another piece to the lifter failure mystery

    Great post A+
  3. J

    Injector builders

    Pure power is a navistar company so they likely supply injectors to ford, I have read that Alliant also supplies injectors to ford, it is quite possible ford has two injector suppliers. For what its worth I put pure powers in my truck when I did the injectors
  4. J

    How many miles after flush before new cooler?

    If you have been running ELC and a filter for so long, I'm not even sure I'd bother doing the flush, just change the cooler
  5. J

    Low boost pressure?

    So I pressure tested the inter cooler and boots to 30 psi, no leaks. There was some oil pooling on the lower hose where it goes into the intercooler when i was double checking the boots. How much oil would be "normal"? zero? I decided to recheck the egr, the gasket at the top had evidence of...
  6. J

    Low boost pressure?

    That is my thought as well but still I'm stumped, Truck has new air filter (stock intake) and I have checked all the hoses for leaks on the intake side, all inter-cooler hoses have been cleaned and checked. Is there another way to check? Smoke test or something? Should I be looking at the...
  7. J

    Low boost pressure?

    Just an update on this problem. I pulled the turbo and cleaned it, it was a bit sooty and some surface rust but cleaned up no problem. I also did the vgt re-learn procedure after re-install and cleared the p1000 code. While I was in there I also installed the blue spring mod. Truck runs the...
  8. J

    Low boost pressure?

    I'm not running a tuner, the truck is all stock. I bought the cts insight just for monitoring.
  9. J

    Low boost pressure?

    Hello, I've just bought a 2004 6.0 with 87k miles- 56k miles on a ford re-man engine after it hung an injector on the previous owner back in 06. It's a 1 owner truck that was owned by a 90 year old guy who passed away. I've been working through the maintenance on this truck after doing some...

Latest posts

Members online

Top