I decided this afternoon when thumbing through the same wires again that the truck is going to the local ford dealer. Even though i don't want a big bill It is out of my control now. I will for sure let you guys know what I hear!
Sent from my iPhone using Tapatalk
My 4wd won't engage. When switching to 4wd hi is says shift delayed. When in 4wd lo it says slow to 3 mph and I'm setting still. The truck is a 2012 F250
Sent from my iPhone using Tapatalk
Fixed the wire too. Is there a such thing on these trucks that the dealer maybe has to reset some computer settings after a wreck?
Sent from my iPhone using Tapatalk
Fixed the brake line and it didn't change any of my symptoms! I have. New abs control module coming hoping that will do it
Sent from my iPhone using Tapatalk
Guys I found a smashed brake line on the block above abs module. It was mashed flat. The line said it was right rear anti lock Brake. I'm hoping this will fix some of it. I also found a wire that was half broke but not all the way.
Sent from my iPhone using Tapatalk
Abs fuse was good. I haven't checked the module connections. Where's the abs module located??
It's not tuned at this time
Sent from my iPhone using Tapatalk
RCM was re programmed and reinstalled. The air bag light was on before and after the new bags, rcm, seat belts, and from impact sensor the air bag light went out
Sent from my iPhone using Tapatalk
Ok guys I'm kinda stumped on what to do next. The truck 2012 F250 was involved in accident drivers side front. Damage wasn't terrible but it did set off front bags. I have the truck completely fixed... But I'm getting a Christmas tree of codes on the dash. Parking brake light, traction control...
Ok guys I need a little help. I purchased a truck that was wreck and the driver and passenger bag was deployed. I know I need both bags for sure and both front seat belts and clockspring. What other sensors or modules or whatever may I need to get it all back going. Thanks in advance for the...
im rebuilding a 2012 F250 both front bags were deployed. I have found the bags and I know I need the clock springs. what about the module?? can the original module be reprogrammed?? Any other parts that I might need? Any help would be greatly appreciated.
Thanks
Warren