Search results

  1. Wizbangdoodle

    SCT Livewire

    SCT Livewire I used on my '08 F350. Truck is long gone and I was unable to return it to stock, so this tuner remains married. It does have a few tunes on it I think. Couple from Innovative (never did shift right) and a couple from another tuner that slip my mind right now, but they shifted...
  2. Wizbangdoodle

    Fords built in trailer TPMS

    That's a question for someone else. I don't know how that module works and whether you can "mobilize" it.
  3. Wizbangdoodle

    Fords built in trailer TPMS

    I think the sensors should work if you have the trailer package on the truck. You'll know it will work if you can bring up the train sensor menu.
  4. Wizbangdoodle

    Fords built in trailer TPMS

    I have them on my trailer. The sensors came with the truck (Platinum). I think you can get the same sensors that are in the truck and those will work just fine. Oh, and when you get to training the sensors, get the little training fob. Takes the frustration out of training.
  5. Wizbangdoodle

    Asheville 6.4 Crate Motor

    When I tore down my '08, I found that the thrust bearings were completely disconnected/worn through from the crank bearing. My theory was, the torque converter would balloon, pushing on the crank, causing it to "walk" and prematurely wear the thrust bearings. I think an aftermarket TC can take...
  6. Wizbangdoodle

    Wiring help

    Don't forget, most headunits nowadays require an emergency brake on signal. I had a switch rigged up under my dash for that.
  7. Wizbangdoodle

    Navigation in place of a stock radio ?

    ^^What he said. I put a Pioneer head unit in my 6.4 and then ran Android Auto. Worked perfectly.
  8. Wizbangdoodle

    Just replaced fuel system no start

    Quite honestly, I just opened that valve with a valve stem remover and let it drain through a clear tube into a container. Once it stopped pushing air out, I pinched the line closed and did my best to keep air from re-entering the valve as I closed it. Like I say, it took several times to get it...
  9. Wizbangdoodle

    Just replaced fuel system no start

    If the fuel pump doesn't shutoff, I'd say it either still has air in the line or a pressure sensor is bad. I know when I did mine, I had to bleed for quite awhile from the schraeder valve.
  10. Wizbangdoodle

    Tune question

    It makes me wonder if this is similar to the issues with '03-'04 Cobras. Years ago, when I owned one of these beasts, they were very easy to make power with. The problem was, it would pull in so much air through the intake that the MAF couldn't register correctly. The fix was an aftermarket MAF...
  11. Wizbangdoodle

    Upcoming Head Gasket replacement

    Yeah, I remember when I replaced my stock TC with a precision industries unit. Made all the difference in the world. Sent from my SM-N950U using Tapatalk
  12. Wizbangdoodle

    Upcoming Head Gasket replacement

    Good luck. I hope it all works out this time around. Sent from my SM-N950U using Tapatalk
  13. Wizbangdoodle

    Upcoming Head Gasket replacement

    Fully dressed, those engines are around 1100# I believe.
  14. Wizbangdoodle

    Dynamic diesel Parma Mi

    I think if you're just buying parts, you'll get your stuff. However, rebuilds and whatnot, are a different story. Sent from a cloud of black.
  15. Wizbangdoodle

    Recall on 2017 platinums

    What is the fix for the door latch issue? Whole new assembly?
  16. Wizbangdoodle

    fuel rail pressure

    Yup, sounds like a new hpfp is in your future. Try White Bear lake Ford parts. Cheapest price on OEM parts I have found. Sent from a cloud of black.
  17. Wizbangdoodle

    fuel rail pressure

    There is a harness that is located around your hpfp. It caused my truck to die and would not restart. Normal idling frp should be about 5k. Sent from a cloud of black.
  18. Wizbangdoodle

    Power steering screaming for mercy

    Replace the belt and check your pulley alignment. Sent from a cloud of black.
  19. Wizbangdoodle

    Power steering screaming for mercy

    Stupid question, but did you change the belt? Sent from a cloud of black.
  20. Wizbangdoodle

    Shifter

    It has a piece on the end of the cable that is like 2 pieces that have teeth on them. They can be slid to adjust. You just have to unmesh the teeth to do it. There is a procedure somewhere in the service manual for doing this. Sent from a cloud of black.

Random media

Turbo_Red_Boost
photo-6
photo_22
IMG_3695
67egrtopplate
stock_wheels_sale_1
IMAG0669
front set-up
IMG_3517_1_
photo_11
bentley_for_prez
New Tires 2

Latest posts

Members online

No members online now.
Total: 401 (members: 0, guests: 401)
Top