Search results
-
T
losing coolant found small leak
Its not that bad but seein as its just a hose its an easy fix for peace of mind. I feel like I am on borrowed time with the egr coolers so really need to get them off. Just need to make some time for this and get it all done. Thanks all for the responses.. -
T
losing coolant found small leak
Coolers are coming off. I see the bottom hose is 2 pieces. That hose doesn't leak at the connection to the radiator? Is that an o-ring also? -
T
In the middle of headgasket replacement, question
Did you put the studs in before you put the heads back on? Any problems getting the heads on? -
T
losing coolant found small leak
Should I do lower(s) also ? Or do guys just replace orings? What about T-stats ? Want to get a parts list together so I can put order in. -
T
losing coolant found small leak
I noticed what looked to be a drop in my coolant level since I changed last year. I lost about 3/4 of an inch in the degas bottle. Filled it up between the lines and now, 2 months later, noticed it down again. I found a small leak at the top radiator hose where it connects to the neck. I need... -
T
low tire preesure light
I got a screw in my front tire 2 weeks ago it eventually set off the low tire pressure light. I plugged it and filled to 65 psi checked the pressure in rest of the tires and all were good. Now 2 weeks later and the light is still on. I checked pressure all around today and even bumped the fronts... -
T
Overdrive light blinking
Had this happen, could clear the code with my scanner but would not show code on my scanner. Showed up on a snap on scanner was torque converter slipping... drove fine couldn't feel it but the computer saw it. Like was said find someone who can properly diagnose.- TjMiller
- Post #4
- Forum: 94-97 Tech
-
T
flushing cooling system questions
You have replaced the oil cooler twice? How many miles and what is it plugged with? -
T
egr delete questions
Flo-pro. In the last pic they show a pile of parts and you can see the coolers separated by a cut flex tube.- TjMiller
- Post #5
- Forum: 6.4 Aftermarket
-
T
egr delete questions
Was getting ready to delete coolers cab on and my kit says to cut the flex tube that connects the vert. and horizontal coolers. Is there a way to get them out without cutting that tube? I will probably never use em again but would like to save them incase. Also I see a lot of people remove...- TjMiller
- Thread
- Replies: 6
- Forum: 6.4 Aftermarket
-
T
6.4 extended crank losing rail pressure after filter change
Had them both out, same as I always do. This time I cheated on the initial start up and only cycled the key 3 or 4 times and didn't let the pump time out each time. Didn't think it was that critical but I guess it is. -
T
6.4 extended crank losing rail pressure after filter change
Was able to do some research and found this is a common problem after a filter change when the key is not cycled properly. I did the key cycle deal (10 times for 30 sec a piece) twice and it stayed running. Seems to be good now -
T
6.4 extended crank losing rail pressure after filter change
Others have suggested air but isn't the system under pressure? Would I see fuel spraying or leaking out? -
T
6.4 extended crank losing rail pressure after filter change
Which cap was it? I will check but I didn't use a torque wrench and figured I over tightened them, didn't want to go any tighter. -
T
6.4 extended crank losing rail pressure after filter change
Looking for some help here guys... Just did a normal fuel filter change on my truck and after completed I went to start it and it starts after an extended crank then only runs for about 5 seconds until it starts losing rail pressure and quits. Key on have between 30 and 55 FRP and cranking...
Members online
No members online now.