Search results
-
M
Black Magnum 2.0 assembly
you could use the search function or we can go through the whole thing in this thread... t444e have the powersteering pump mounted in the valley above the HPOP some smart fellow back in the day took off the steering pump and put a $200 gear pump in its place to supplemant the HPOP I believe...- m j
- Post #87
- Forum: 7.3 Aftermarket
-
M
anybody still running a srp1.1?
I watched that video a few times, there was no useful info in it. I might have downloaded it but it isnt worth searching through 4tb of hdd to see- m j
- Post #45
- Forum: 7.3 Aftermarket
-
M
anybody still running a srp1.1?
the installed and working heights are the same as a stock pump, stock swash on these. all he did was oversize the bore of the cylinder. maybe he used the springs that came with the core pumps? can Joe Public buy new springs for the HPOP from Dimaco or Alliant or ??- m j
- Post #44
- Forum: 7.3 Aftermarket
-
M
anybody still running a srp1.1?
SWAMPS POSTED PICTURES OF THEIR FAILED SRP PUMPS! with broken springs I didnt have to ask them. they are reputable and actually diagnosed and found the cause of the issue. the lengthy list of "symptoms" you describe is what causes me to question your BS story, mainly because after experiencing...- m j
- Post #43
- Forum: 7.3 Aftermarket
-
M
anybody still running a srp1.1?
well dealing with people like you, that blame the wind and rain on an hpop, would get pretty tiresome. I recall the warranty to include a fee and a stringent time limit on registering the purchase to qualify. my recollection of your story was you were not willing to comply to the terms. I...- m j
- Post #36
- Forum: 7.3 Aftermarket
-
M
anybody still running a srp1.1?
I like that link it appears they have a snapring to retain the guide plate around the feet of the 'pistons', I do not recall that on my pump- m j
- Post #34
- Forum: 7.3 Aftermarket
-
M
anybody still running a srp1.1?
mine doesnt have that metal band around the barrel. did you measure the diameter of the 'pistons'? .437 is stock .500 is srp the only thing that can fail other then the factory housing is the springs. if you find a source for replacement springs let me know.- m j
- Post #33
- Forum: 7.3 Aftermarket
-
M
HPOP access cover
thats cool I have some viton -140 , thats the HPOP rear cover size as well- m j
- Post #12
- Forum: 7.3 Aftermarket
-
M
Performance Injector Install Video
must be a mekanik to notice that it was a coarse 1/2 drive ratchet. on the OBS the pass side cover gives me more grief then the DS.- m j
- Post #9
- Forum: 7.3 Aftermarket
-
M
OBS 05+ axle swap
axle side trac bar is a balljoint. I can get some lengths maybe latter today.- m j
- Post #105
- Forum: 94-97 Aftermarket
-
M
Performance Injector Install Video
so no one jumps on him for "380hp injectors" ??? one of the better BKF videos I have watched.- m j
- Post #4
- Forum: 7.3 Aftermarket
-
M
Black Magnum 2.0 assembly
what did you do for rockers? my core had some ugly wear on the valve tips so I assume I need rockers. $23 each seems steep I bought a new pan and dipstick adapter to go with the oil pan gasket. going to use a viton oring- m j
- Post #70
- Forum: 7.3 Aftermarket
-
M
Opinions on RSK??
caster doesnt look to be your issue. trac bar is tight? steering stabilizer functional? the image looks to show new tierod ends- m j
- Post #64
- Forum: 94-97 Aftermarket
-
M
OBS 05+ axle swap
what bolts? I can shoot some images. I removed every bracket on the 2008 and kept the fasteners with the removed parts- m j
- Post #103
- Forum: 94-97 Aftermarket
-
M
Obs ati damper???
its a rubber balancer like stock not fluid so yes- m j
- Post #4
- Forum: 94-97 Aftermarket
-
M
OBS 05+ axle swap
my readylift bracket arrived today my donor is 2008 and the frames differ, so I needed the 05 bracket got it off ebay for around $160usd its made in Tiawan- m j
- Post #101
- Forum: 94-97 Aftermarket
-
M
New Steering Components
Moog turned in to off shore junk years ago, for a while I was using Spicer gold but I am not a sure they are still available
