Search results

Truck was running good and stock turbo blew on me and i replaced the turbo with non vgt. I found shavings, possibly brass colored in the filter housing i thought were from the turbo bearings. Now i had the truck stumbled coming up a mountain, and a p2285 code. I went ahead and replaced the icp...

I have a 2004 manual, was running fine, shut the truck off, the next day it wont start. The icp and ipr readings look good, batteries were charged, ficm reading was good but swapped it woth a good ficm as well. I replaced the crank and cam semsors just to be sure. It will not sync on my...

Starter has been making a noise when cranking. Just assumed it was going bad. Went to replace it today and it was loose, bolts were in but not tight. Cone has some damage to it. How is best way to replace this? Just install new starter and hope for the best or remove the transmission and check...

Who sells the best repair panels. I need to repair cab corners and dont wanna cheap crappy panels. Sent from my SM-S102DL using Tapatalk

Running a diy setup and baldwin b164 filter. Would like to go to the amsoil filter. Is there an adapter i can get to run the amsoil on my wix filter head or do i need to redo my system? I assume the amsoil choice would be much better than the b164 right? Sent from my SM-S102DL using Tapatalk

I've got motor torn down to fix some issues. While at it I'm thinking of upgrading the Tc while it's apart. This is gonna be a true tow rig. Maybe a chip, it's going to be studded and basic upgrades. Nothing more than a chip. What is the best tc for that? I just want something to handle a good...

Bought a 6.0 I knew would be a lot of work but got a good deal on it. Motor was studded and egr ******. Starts up and idles fine, if you rev the motor I have bubbles in the coolant tank. Drained it and no oil sludge but looks like diesel maybe mixing with it. I'm almost ready to pull the cab...

Got a 05 250 zf6 that has a bad vibration from the rear end especially towing on mountains. I mainly tow but plan of turning it into a high hp daily driver once I get my other rig in a few weeks. What is the best upgraded rebuild kit out there and any mods I need to do while it's tore apart? I...

Fuse #43 is good. Low high beams work. The fog light indicator doesn't light up when pulled out. Bulbs are good. Any ideas? Sent from my moto g(7) optimo maxx(XT1955DL) using Tapatalk

Looking for a gray driver piller for a 2012 super duty. Figured id try to find a used one before i bought a new one on. Sent from my SM-S727VL using Tapatalk

Are they worth anything? I can get a set dirt cheap, around 500/4 but i cant find hardly reviews on them. Just thinking about saving some money. Btw roads around my area i get about 25k miles on a/t, and 18k on most mud tires. Sent from my SM-S727VL using Tapatalk

So ive had my own bypass installed for a while now. I was running a baldwin b164 filter but wondering what everyone else is running or are there better options than that? Sent from my SM-S727VL using Tapatalk

Selling a non vgt stock turbo for a cab and chasis truck. Original turbo went out so i bought this one til i got funds together for the 17' turbo kit. This is a new ford oem turbo with about 2500 miles on it. No in and out play. This is not the pickup model turbo. Asking $850. Sent from my...

Just done an egr ******, oil cooler and stc fitting for my buddys truck. Ran fine now two weeks later it developed a hot no start. I mean as soon as its switched off it wont start. Kinda wierd its fine for 2 weeks then now it has a problem. Also it developed a high pitch squel from turbo area...

Long story short stock turbo was pretty much shot on my boss's cab and chassis truck. It was parked until he could order a new turbo kit. Someone drove it by mistake 1.5 hours away. What problems could this have caused? I have the kit on order but worried about the motor. Btw i know not to...

Need rust free cab to fit a 05 6.0. Bare cab doesnt matter color, i live in va, id be interested if u live close. Can even be with doors but no rust!! Lmk what u have Sent from my SM-S727VL using Tapatalk

I recently rebuilt my truck and have an ongoing issue that i cant solve. Here is a list of mods: Full rebuild 7k miles ago, full fuel system with 1/2" fuel lines, 6.7 pump, diy regulated return with just redone 190/75% warren injectors. 5/40 scheffers oil, new ipr, hpop, ebp, main harness, glow...

My cab is starting to rust including the rocker panels and the cab corner. Would it be easier to weld new panels and replace everything or would it be easier just to swap cabs with the rust free 1. I will be doing all the work so it won't be a shop but does anyone have any experience replacing...

Need some valve cover bolts, regular and stud. Also the metal clip on the injector plug, a couple of them. Just thought someone might have some laying around before i buy them new. Sent from my SM-S727VL using Tapatalk

I started installing my system and tried looking but getting different answers. I used yellow teflon on my filter bases, but is that what i should be using? Ive got copper washers to use on the 90s for the heads, but what about the regulator or everywhere im not using AN fittings? And AN...