Search results

SOLD Barder stage 2 built from a Powermax 64.7mm Compressor 66mm 10blade turbine fresh rebuild $900 located in Northern Utah

Truck will not build over 4-4.13v Icp even on stock tune. It has a New Thumper II Hpop, 6month old Premium WDI 205/30 injectors, WDI high flow stand pipes and New nipple cups and o-rings. I’ve tried New Icp and ipr(motorcraft) it just stops and holds at 4-4.13v. I can run 120psi through the ipr...

Who has any Real first hand experience with The RCD Thumper 1 Hpop? I put mine in about a week ago and it will only run 3.5-3.8v on a wot run my stock pump would bounce between 4-4.6v on the same WDI Race tune this is with 205/30 injectors, I’ve got WDI high flow stand pipes in it as well. I...

Ford 6.0 Warren 175/30 injectors about 30k miles they were remans with new spool valves when purchased zero issues with them just upgraded they will come with a Motorcraft o ring kit $1100 shipped No cores needed https://youtu.be/1nKLyhsVn7M Sent from my iPhone using Tapatalk

166k the heads were pulled inspected and resurfaced shockingly no cracks were found, OEM ford gaskets were used on everything ,ARP head studs,updated dummy plugs stc fitting ,ford oil cooler,turbo drain,fuel spring,6.4banjo bolts SCT tuner with several custom tunes from ******** Diesel 155cc...

Just did studs one at a time dummy plugs stand pipes ,updated STC fitting and an egr ****** on a 2005 and now injector in cylinder 7 isn’t firing it passes a buzz test fine ficm was recently redone I double checked it and the harness truck has 63k Miles is it possible the lack of oil from...

It's a shot in the dark but looking to trade my warren 155/stock injectors for some 175 Or 190 injectors may even consider a little larger. I sent these to Warrens 4-23-2015 for a checkup to get cleaned and flowed and have put about 1250 miles on them since (70psi fuel pressure ) Pm me If your...

On a recent hunting trip pulling a goose neck (4,500LBS) 150 miles one way my truck started puking coolant i have a scangauge II and my max temps the whole drive was EOT 226 ECT 217 it lost over a gallon of coolant both ways +1 there and +1 on the way back it may have been a little over full on...

New guy here had an 04 6.0 few years back and have regretted selling ever since i bought an 2005 Dodge common fail after spending more then i paid for the truck building it up i finally parted with it now I'm ready for the 6.0 show again. hoping to turn My 2007 single cab into a 450-500hp...

New here so please be easy on me if im asking a repeated question :axe: ok so just picked up a 07 single cab f350 for a good price with 155k runs great stock except 4''exhaust from stock down pipe Basically i wanna do a simple build on this truck cheap but reliable just to show that 6.0's arent...