Search results

  1. T

    Oil residue in intercooler piping

    I’ve had the MPD budget 364.5 kit with full piping and CCV kit on my truck now for 100k miles. I did a boost leak test on the truck as it felt like it wasn’t running as well as it did when I initially installed the kit. Well, when I pulled the intake piping off the turbo inlet I found what I...
  2. T

    ABS module leaking brake fluid

    My ABS module (machined aluminum block) appears to be leaking brake fluid. So pouring out of it but after a one hour drive to work I can see it starting to run down the spring perch onto my 3-link arms. It looks like it’s coming from one of the two hard line fittings on top of the module. Is...
  3. T

    330k on clock, what internals to upgrade?

    I’ve got 330k on the clock and she’s paid off so I’m looking to shoot for the 1k HP mark. Now, I know this is a lofty goal but I’d like to reach as close too (or over) it as I can. What engine internals and transmission work needs to be done to keep it from spitting a rod or toasting the trans...
  4. T

    Drop pitman hits track bar bracket

    Has anyone had this experience? Installed a Fabtech drop pitman arm along with a Ready Lift track bar drop bracket this weekend and when I try to turn full left or right the pitman arm hits the track bar bracket. I’ve already verified that I have the correct part #s and made absolutely sure...
  5. T

    6.7 WVO conversion

    Who makes a reliable WVO conversion kit for the 6.7?
  6. T

    Need steering wheel wire schematics

    I need steering wheel wiring diagrams for 2013 F250 Lariat and 2017 Lariat no heat, no adaptive steering. Please. Thank you.
  7. T

    ‘13 HPFP limits

    So I have the MPD 64.5 kit with full piping, tuning by NL. When I try to give it full throttle it initially feels like it’s making good power and then it feels like there’s a stall. Almost as if I was letting off the throttle a bit. As soon as it shifts to the next gear it feels like it’s...
  8. T

    Oil cooler leaking on cold start

    Has anyone had to deal with this? We had a cold snap a few weeks ago and ever since then when I come out first thing in the morning and start the truck, it leaks for 1-2 mins then stops. I’ve bought the four gaskets it calls for but can’t find the procedure for R/R. I know the oil pan has to...
  9. T

    2013 250 rear heated seats wire diagram

    Does anyone have the wiring diagram for the rear heated seats? I had to clean up a spill so I took out the seats and now none of the heated seats in the rear work. All of the connectors are the same profile and they’re a PITA to get to. I’d like to know what plug goes to where so I only have...
  10. T

    Industrial Injection CP4? Yay or nay?

    Does anyone have any experience with any Industrial Injection CP4 pumps or is Exergy the gold standard?
  11. T

    2017+ front bumper on an 11-16?

    Will it fit? Looking to get rid of my Road Armour. Liked it when it was new but after 5yrs the sun has faded the powder coat. Don’t want to mess with getting it redone.
  12. T

    MPD Budget kit turbo blanket

    Has anyone found a turbo blanket that they can install after the MPD turbo is already installed? I tried for about 30 minutes this morning to get one to clear what little room there is between the turbo housing and the exhaust manifolds with no luck. Thanks for the help.
  13. T

    Sway bar for Carli 4.5” full leafs

    So I finally got around to installing my 4.5” Carli Commuter system with full Deavers and these kits are worth every penny! The wife didn’t even complain about putting her makeup on in the truck and that’s the REAL test. One thing I have noticed is the increased body roll. I know it’s to be...
  14. T

    Carli 4.5 Deavers PMF 4.5 Deavers?

    Looking to replace my rear leafs with either the Carli or PMF Deavers but was looking for any insight from those who are running either. I have the 4.5” Carli Commuter Fox shocks and I know you’re supposedly to match components from mfgs. That said, is there a noticeable difference in either leafs?
  15. T

    30 minute serpentine belt R/R without removing fan.

    It can be done for those not wanting to buy the extra tools to remove the fan. I removed the old belt without cutting that either. If you remove the bolt holding the fan clutch wire harness bracket and disconnect both ends of said harness it’s free to rotate towards the fan allowing you to slip...
  16. T

    WTT/WTB Carli 2.5” springs for 4.5” springs

    Wanting to buy, open to trades, my Carli 2.5” springs for Carli 4.5” springs. In the D/FW Texas area.
  17. T

    MPD Budget swap. Where do the voids under turbo lead to?

    So I pulled the factory turbo today to swap in the MPD Budget turbo kit. Now I know that the stock turbo is cooled by the coolant system but when I pulled the turbo some coolant drained out of the bottom of it and into the area under the pedestal. Where do all of those voids under the turbo on...
  18. T

    Factory turbo finally went, what are my options?

    Factory turbo finally went @ 268k miles on my daily driver. Not looking to go too crazy with the replacement but not wanting to go back to stock. I do want to stay VGT and still use the factory fueling. I’ve already gone on the diet. Thanks for the help.
  19. T

    2017 steering wheel fits ‘11-‘16?

    Is anyone aware if the ‘17 Super Duty steering wheels will fit a ‘11-‘16? Mine has seen better days and I’m going to replace it but would like to update it with a ‘17 model one of it fits.
  20. T

    Integrate FMIC?

    Is it possible to integrate an FMIC and still keep the air-to-water factory intercooler?

Latest posts

Members online

Top