Search results
-
Towing with level 17-19 f250
Got a new truck last year 19 f250 leveled with 35s. I have a 29ft travel trailer 36 ft overall weight in 8800lbs dry 900lbs tongue weight. I used to pull it with my leveled 15 f150 3.5 eco and had air bags in back to level back out and a weight distribution hitch. Im just wondering if the 19... -
6.0 misc parts
core ficm - 100$ Billet Adjustable fuel pressure regulator - 125$ Carrier bearing shims - 25$ Oil rail pressure test adapter - 20$ Oem intake Elbow - 50- Decker
- Thread
- Replies: 1
- Forum: Miscellaneous
-
Crank slowly died to no crank no start
As title states 06 F350 started fine this morning. Went to leave work and crank slowly to no cranking at all. No ticking nothing. I tested both batteries and both good, only two months at that. When I turn the key lights do not dim. I believe it is the starter but don't want to just toss money... -
Welders need some info - Boron
Anyone on here welded Boron? I have a job at work and for the life of me can't get this stuff to weld nice. I ask for info on welding it and was told to use what I have. Any tips on wire or gas? Everyone I ask said it can't be welded. Well it's made to be spot welded. I have a old timer friend...- Decker
- Thread
- Replies: 11
- Forum: Welding & Fabrication Forum
-
E brake light comes on dash goes out
So recently my red e brake light comes on while I'm driving. Shortly after that my dash and radio go out. Lights still all work just everything goes dead. Then few moments after the dash power comes back on and red e brake light goes away. Brake work fine and still have power to engine but... -
Led light static
So I installed new led projector headlights on my truck. Now when the lights are on I have static over my radio and it's only a few stations. But if my lights are off they all come in pretty clear. Anyone have any ideas to counter the interference? I seen the ferrite coils, anyone have any...- Decker
- Thread
- Replies: 6
- Forum: Aftermarket Super Duty 1999 - Current
-
Building DIY RR
So I'm looking to build a RR for my truck. I have sorta have a idea of what i want to do. My 6.7 pump to a dual remote filter base using a cat 1r1749 fuel filter and 175-2949 water separator to a y block. Then down size from 1/2 to 3/8 at the y block. Feed back of the heads using a 3/8 push loc...- Decker
- Thread
- Replies: 20
- Forum: 6.0 Aftermarket
-
low speed growl feel in drove seat
I'm getting a low speed growl that I can't seem to find. At like 15-20 mph I get a humming growl from rear end that I can feel in my seat. If I speed up or slow down it goes away. I thought it was hanger bearing since the boot was worn so I replaced it. While off i chrck all u joints. They all... -
shift solenoids
So today I was driving home and I was leaving a light and all of a sudden my truck slams gears. It felt like I got rear ended. I look down and my tow haul light starts flashing. I check codes and it says p0763 and p0980 both have to deal with solenoid c. Truck goes from 1-2 to 5 and has hard... -
fuel pumps OEM,Carter,Airtex,etc.
So I'm having issues with my fuel pump again still not holding pressure. I replaced my old pump with a racor pump. I must say this thing is garbage and less then year old. Only puts up 58 psi with blue spring and drops down to 50 and below on anything more then 20% throttle. At first start it...- Decker
- Thread
- Replies: 27
- Forum: 6.0 Aftermarket
-
ficm fulcuation
I'm pretty sure my ficm is toast but thought I ask this question first before I go buy a new one. So other day I started my truck and it start rough so I check my codes. I got a contribution code on all injectors. I clear the codes and thought maybe it was a fluke. I check ficm harness little... -
6.0 ARP head studs new in box for sale
New in the box, only unwrap plastic to check out studs. Nuts and washer still in original wrapping. Arp Fastener assembly lube also included. $400 Or Would also be interested in trading for a 6.0 regulated return or a 03 turbo.- Decker
- Thread
- Replies: 3
- Forum: Engine and Drivetrain
-
04 f250 6.0 $5500
2004 Ford F250 208000miles This truck is no show truck. Would be decent work truck or someone toy. Truck did sit for a year while I was deployed. After few cranks she fired right up and does run. Just want give as much info as I can. Anyways truck has - 4 in lift - 35in tires 315/85r16 -... -
fuel pressure fluxuating
So on my 06 6.0 had a blue spring upgrade done before i bought it and when the truck was cold my fuel pressure sat steadily at 60 psi. When fully warm it would drop to around 50. On hard runs not WOT it would go down to about 47. That scared me a little. So I ordered the accurate diesel... -
IPR Gen 3 egr D3L3T3
Been looking at egr kits for my 6.0. Has anyone tried or have any info on IPR Gen 3 kits. http://www.iprresearch.com/IPR-GEN3-EGR-******-Kit-for-all-2005-2007-Ford-Powerstroke-6.0-will-fit-F250-F350-F450.html Looks like a nice piece. Seems to be a lot of info on the gen 2 and looks like...- Decker
- Thread
- Replies: 5
- Forum: 6.0 Aftermarket
-
Worth it to buy 16.5
Found a good deal on some weld 16.5x12 mountain crushers in decent shape. They need to be polish but no gouging or road rash. Is it worth to buy them? Been looking at tires to put on them. Seems that only interco and pit bull have the option for them beside military knock off. I mean is a really...- Decker
- Thread
- Replies: 8
- Forum: Suspension, Drive Train, and Tires
-
Getting ground clearance on 04
So my dad wanted to get me a wedding gift and asked what I wanted and joking around I said I want some bigger tires for my truck. Surprisingly he said alright you find what you want and there yours. He said he will get them for me when I come home. So I'm trying to figure out what largest tire I...- Decker
- Thread
- Replies: 15
- Forum: Suspension, Drive Train, and Tires
-
diy tuner pod mounting ideas?
So I have a edge evo that I use to monitor and it used to be mounted to my dash till I installed my pillar gauge. I had it sitting in my center counsel till my dog decided it could be a chew toy. Anyways I decided to mount it above my rear view mirror so it was out of the way and still easy to...- Decker
- Thread
- Replies: 11
- Forum: Aftermarket Electronics
-
6.0 Oil cooler shot less then year old!!! Options
So I was driving my 04 6.0 CCLB with 4in lift and 35s going up north this weekend pulling my pop up trailer. I have a edge evo that i use for now that i have set on tow and use to monitor my temps. Trailer probably weighs close to 3500lbs. On way up there i notice my EOT/ECT start to separate... -
6.0 steering problem
I have a 04 f250 6.0. Ill be driving down the road just fine but then ill come to a stop sign and turn the wheel to make a turn and hear a pop. Then ill start driving and steering wheel and tires start to shake like the tie rods went out. i can't get up to 10mph before it all shakes. I just...
