Search results

I was just wondering what the gain was if any I got brand new alliant ac code injectors going in my truck now the rebuilt stage 1 injectors had ad on the solenoids so I suspected they converted them to single shots I was just wondering what the advantage was that's all thanks for the info

maybe I explained it wrong what is the advantage of converting ad injectors (split shot) to a stage 1 160cc single shot ? sorry for the confusion

aren't ad injectors for 99 and up 7.3 and also split shots what is the advantage or disadvantage making a split shot injector a stage 1 single shot? im just curious

well the new to be wife bought me new Alliant ac code injectors what a gal god bless the rebuilds im going to send in as cores and I will take this as a learning lesson I do want to thank mandkole and garbage mechanic for you guys help and the rest of you guys for understanding maybe if the...

I talked to ryan I believe his name is (owner) he said to check a few things but didn't go into detail he basically was trying to blame the install or that i had contaminated fuel or contaminated oil which imo are all excuses in my book they were very helpful when I was making the purchase...

no they were bought from full force diesel very poor customer service

thanks for the info much appreciated

well the new to be wife is going to buy me new alliant ac code injectors so I will take buying rebuilds as a learning lesson not to do that again I see sets with 8 ac code and some with 7 ac code and one ae code wasn't that a bulletin back when for fuel cackle? which set is my question is the...

well thanks mandkole I was thinking it wasn't good after reading what you said my stomach dropped so it looks like im going to have to work some overtime the next few weeks to pay to have these gone through just what I didn't want to hear but it is what it is,, just kinda goes sideways that...

well these are only little guys 160cc stock nozzle injectors I wasn't looking to make a ton of power and my budget was no more than 5k to spend which I went over you know how one thing leads to another but in all reality I was hoping to make roughly 350-360 rear wheel hp I did upgrade the turbo...

they are not standing behind them(never again) so looks like im eating 1200.00 for 300 miles does pis do injectors over?

well come to find out my slightly used rebuilds are leaking oil out of the spouts with no power to them:shrug: in any case there supposed to be under warrenty 3-4 months old and under 300 miles of use in any case I need to send them out to a respectable builder who would you recommend ? and...

well I checked the injectors with a straight edge they are all sitting pretty I took the spouts off the injectors so I could see if any oil comes out of the holes that squirts the oil out of the spouts 6 out of eight are leaking oil out of the holes a few drip more oil than others 2 out of...

well my buddie who helped me told me he used the hold downs to seat 4 injectors on the pass side any chance that he may have torn an o ring and that is causing loss of pressure to the injectors? I used a small rubber mallet to do my side and then ran a straight edge across the tops of the...

hello well i put a set of remnant stage 1 injectors in a couple months ago along with new alliant valve cover gaskets and injector harnesses and also while in there new motorcraft glow plugs it had autolites and i was told to get em out of there so i did in any case the truck ran good for a...

I just wanted to be sure before pulling the chip thanks for the help

when removing the hydro chip does it have to set to stock position before removal? not sure if the pcm will hold a tune on it or if its all in the chip I want the pcm to go back to stock calibration thanks