Search results

Anyone on here a Kelderman dealer? Need to price out a 12-14 air ride kit for an Excursion.

Looking for a set. Without overload preferably, but I can work around that. Also would prefer with shackles but again, not a deal breaker. Let me know what you got.

So I have a F-450 that I am putting together that I would like to setup as a flatbed/dump bed by using removable sides. I also would like the ability to tow a gooseneck trailer with it. Here is my thought process. I am going to be mounting it on a 05 F-450 CC chassis. I will build a heavy...

I have an issue with a truck i am working on where it will not build any High pressure oil. Truck is a 2001 auto 2wd F-450 CC just to fill everyone in. I have tried 3 hpop's. One was from a running truck. New ipr, and known good Ipr. Has lpo, lpo pump is brand new, and if i crank the motor...

I have a head with a cracked cup. Can anyone recommend a good tool to remove/replace the cups?

Looking for a couple of measurements from the front suspension if anyone is willing to take a few. Need the height of the spring at ride height. Also looking for the distance from the axle to the frame at ride height. Also curious what you are running for rear springs? No block? Any leafs...

I am swapping a set of 14 platinum wheels on my Excursion. They came with the factory tips still installed. Does anyone know of a controller that will let me monitor these that I can install on my Ex?

So the time has come to do some upgrades to the Ex. I originally bought this truck 3 days before my twins were born(march 2013) Only thing needed to pass inspection was new brake pads, but I ended up putting all new calipers/rotors/pads on it. I am the 3rd owner technically, (Man bought new...

I have been getting a raw fuel smell from my Excursion lately. I noticed it this summer, but it is much worse now than it was then. This is after hours of driving, not just when it is cold. Truck is 100% stock with 205k miles. Starts great even when it was down to <5 here recently. Cranks...

Looking for a mill to add to my shop tools. Something that I can use to make exhaust plates, turbo mounts, etc. Was looking at older bridgeport j heads as the price seems reasonable on them and everyone says the older ones last forever if taken care of. Any suggestions or things I should...

Planning to put together a motor. Debating if I should raise or lower the compression. Pro's and con's of each? I have a few different ideas for each way but wanna hear other opinions first.

Anyone running them? Looking to get these for my excursion, just looking for some first hand input. I had a set of 35's on my 350 a few years ago and loved them.

Got a 2005 f-450 that I recently bought and am trying to get everything on it working right. I currently have an ABS light on, but when I try to connect with my A/E I get no response from module. I tried to connect directly to the abs system and it is saying not supported/not found. I swapped...

So ever since I bought my Ex last year the number pad on the drivers door has not worked. It doesn't light up, and pushing the right 2 buttons wouldn't lock the doors. I finally got some time to mess with it over last weekend and this is what I found. I have 12v power to one of the pins at...

I have a F-450 that I bought and I am thinking about converting it to 4x4. I have a trans and transfer case already. Just need the front axle. Are the 350 and 450 units completely different or only have differences in the knuckle/hub/adapters? I have found a few 350 axles for a good price...

Trying to help out a friend of mine. He recently purchased a nice clean 05 Ex with a 6.0. Truck has what appears to be a 6-8 inch lift with 37" tires. It looks great, but drives like sh*t. Feels like the rear wants to pass the front all the time when driving. To cut right to the chase, we...

I need a block and heads for a mock up motor. I don't care about pistons, cam etc. Just need a block and heads that I can bolt together and set in the frame to lay things out. If it has a pan and valve covers that would be great but not necessary. Let me know what you got. Do not want to...

Anyone know where I can find a one piece removable fiberglass or sheetmetal front clip for a superduty? Not really worried about what year it looks like, but it will be going on a 2000 cab. Would prefer a one piece from the firewall forward.

Anyone put these in there Ex? I am collecting the parts for an 05+ suspension swap and the setup I bought didn't come with rear springs. Figure if I have to buy a set, might as well put the 08+ in there if they will fit.

Anyone know where I can find these? I have the 3 local ford dealers looking for them, but so far all they can supply me with is the pigtails, and I just need the pins so I can build my own harness. Working on building a breakout box and a couple of other harnesses for testing and such.