Search results

Anybody on here successfully enabled cruise control on a 2020 superduty? Customer has added the steering wheel with cruise buttons but I can’t find anywhere on FDRS to enable cruise. I’ve seen a few posts online where some guys used forscan but I have no experience with it. Sent from my...

I’ve removed several alumiduty cabs but just curious how everyone is removing the cab bolts? In the past I’ve removed the nuts that hold the insulator to the frame and left the actual cab bolt alone. But doing it that way is a pain to set the cab back down having to realign all of the holes...

Vehicle is a 94 e350 ambulance with 7.3idi non turbo and e4od trans. Customer has supplied me with an e4od out of a 96 Powerstroke truck. I know the converter is different and the solenoid block is also different. Can the solenoid block be swapped and everything else work? Sent from my iPhone...

Got 2 trucks in our shop that are using coolant. Have pressure tested both trucks and there are no external leaks found. One is a 2011 other is a 2016. Both company trucks that do a lot of hauling and highway driving. Both trucks are dleted, both exhaust and egr. Anybody seeing headgasket issues...

Anybody with a mini max tuner able to monitor ebp pressure or voltage? Looking at a customers truck last week trying to diag a turbo issue and saw his ebp voltage was 0 volts and 4psi. Returned truck to stock and ebp readings were normal. So I looked at a buddies truck to compare. Same thing...

Seeking any advice or help with this truck. Truck has 262k miles. Customer just bought it from another friend who is a car dealer. Previous guy bought it in December and it’s done this since he’s owned it. Extended crank (4-5 seconds) at all times but will always start. Push button start. If...

Customer dropped this truck off saying it was low on power when towing. He had went out of state the weekend before and on his way home pulled off the highway, fueled up without shutting the truck off and when he got back on the highway he had no power. Ran 55mph all the way home. I hook up to...

97 OBS 7.3 power stroke 251k miles Engine had an uneven crank and low compression on cylinder 8. Popping through intake. Verified that it was the intake valve by pressurizing that cylinder with both valves closed. Pulled the head to find the face of all of the intake valves extremely worn...

2015 6.7 cummins 62,000 miles Truck came in with low rail pressure and would barely move under its own power. Rail pressure was 3500ish psi. Any kind of throttle input and rail pressure would drop below 1000 psi and truck would stumble and barely stay running. Checked fuel filters and there...

Got a customer with a 2014 6.7. Truck is deeleted with minimaxx. He works on the road and is currently in North Dakota working. He was home over thanksgiving and had us check out a water in fuel light that had intermittently been coming on. There’s also a service exhaust system message that...

Has anyone had success in replacing one of these jets by removing upper and lower oil pan? I know it will be an extremely tight spot. I’ve read several threads where 7.3 guys say they’ve done it by removing the pan so I figure these should be similar enough. Sent from my iPhone using Tapatalk

Truck came in as a no start after it has been to a local dealer for the same problem over the last 6 months. On IDS sync and ficm sync were not together. Sync would go to YES after 2-3 seconds of cranking but ficm sync would never show until randomly the truck would start and after running ficm...

Took my 6.4 to the track for the first time tonight since I've had it together. On the initial test drive before the track it seemed to spool good and take off like a rocket. Get to the track the first pass I spooled to 2200rpm not sure what boost and only went 14.5 @ 94. Got back to the pits...

Liberty 22x10 black Toyo Open Country A/T 325/50r22 I bought this setup on here from another member. Setup has roughly 10k miles on them now. They look great but rub a little on my truck with just a level and I'm getting tired of it. Located in Joplin,MO Call or text if seriously interested...

Truck came in with low base oil pressure. Gauge would sometimes show oil pressure and randomly it wouldn't. Truck would still run and drive customer complained of low power though. Hooked up a manual gauge and it shows less than 5-10 psi at idle. Cold is obviously a bit higher but not much...

Had a truck come in the shop a few weeks ago, customer said he heard a pop noise at a stoplight and then started idling rough. He first took it to ford dealer because they told him they would fix anything that happened to it, turns out they wanted nothing to do with it now. Figured it had a...

Got a cab chassis 6.7 in our shop this week. 12x,xxx miles on it all stock. Anyone seen broken cranks? Or what has been seen as far as lower end problems? Also what are the differences in cab chassis engines and pickup engines besides turbo, and piping and intake manifold, and ecm calibration...

We acquired this truck through a trade with an excursion my dad bought. Came from a very good friend of my dads. One owner truck. We've known the truck since new and have been the only shop to work on it. 57,800 original miles Lariat interior tan 2014 wheels and Michelin tires that came off...

Here within the last 2-3 months we have had 6 of the oil rail standpipes break, 4 of which were fresh off the shelf from Ford dealer. Attempted to separate them at the middle connection and the casting on the check valve side literally cracked in half. 2 of them were installed in a truck that...

Not mine. Found on Craigslist. Looks like a really cleans and nice truck with a good price too. 42,000 miles https://tulsa.craigslist.org/cto/4876165402.html