smokindully99
New member
- Joined
- Aug 12, 2011
- Messages
- 28
- Reaction score
- 0
Alright guys, I was planning on doing a fummins build but due to a recent divorce I'm having to put my project in hold due to lawyer fees
I have a complete early 04 engine 305hp. Has ECM wiring harness and all. Engine has 160000 miles and injectors were replaced 50000 miles ago... I bought engine off a guy on the forum back in August. Engine came outta a wrecked truck so there's a few things that would need replace but I have pics of everything. I will try to post pics later but I can text pics if ud like. The block where the lower radiator hose was cracked due to the frame rail hitting it but I was told it can be welded up an remachined. I do have another block that will go with it as well if you don't feel like messing with it... The other block jus came outta machine shop and has been bored .020 over and is also drilled and tapped for 14mm main studs and I have the main studs that will go with it... It's also machined for fire rings.
I have 5000 tied up in this and I'd like to at least try to get what I got in it without losing to much of what I have in it, but I will accept reasonable offers and I need this gone... If you need a shipping quote I can get one for you and if you'd like to get one I'm located in 70520 and pallet is 1400pds with engine and block together...
You can also call or text @ 337six5four6seven5eight
Thanks for looking guys
Joel
Sent from my iPhone on my way to anywhere but here
EDIT: Heres the pics... The last pic is where the frame hit the block where the lower radiator hose goes... It can be repaired but you will have to disassemble it because it has to be heated before it can be welded and then the gasket surface remachined... Like said above the block in the pics is also goin with it so you dont have to mess with it if not...
I have a complete early 04 engine 305hp. Has ECM wiring harness and all. Engine has 160000 miles and injectors were replaced 50000 miles ago... I bought engine off a guy on the forum back in August. Engine came outta a wrecked truck so there's a few things that would need replace but I have pics of everything. I will try to post pics later but I can text pics if ud like. The block where the lower radiator hose was cracked due to the frame rail hitting it but I was told it can be welded up an remachined. I do have another block that will go with it as well if you don't feel like messing with it... The other block jus came outta machine shop and has been bored .020 over and is also drilled and tapped for 14mm main studs and I have the main studs that will go with it... It's also machined for fire rings.
I have 5000 tied up in this and I'd like to at least try to get what I got in it without losing to much of what I have in it, but I will accept reasonable offers and I need this gone... If you need a shipping quote I can get one for you and if you'd like to get one I'm located in 70520 and pallet is 1400pds with engine and block together...
You can also call or text @ 337six5four6seven5eight
Thanks for looking guys
Joel
Sent from my iPhone on my way to anywhere but here
EDIT: Heres the pics... The last pic is where the frame hit the block where the lower radiator hose goes... It can be repaired but you will have to disassemble it because it has to be heated before it can be welded and then the gasket surface remachined... Like said above the block in the pics is also goin with it so you dont have to mess with it if not...
