Reply to thread

Message: [QUOTE="6.0 Tech, post: 1565705, member: 23001"] You were trying to charge thru the low side, correct? If so there are a few common reasons it won’t take any. 1-your source tank is empty, or lower pressure than the low side 2-you did open the hand valve when you installed the hose onto the service port, correct? Open is tightening it down 3-aftermarket junk ac service kits sometimes won’t open the service port, as was stated in the reply before my first reply. Anything other than that isn’t very typical. If you had a restriction anywhere to the point of it not accepting refrigerant, your low side would be extremely high, or 0-in a vacuum as the compressor cycled. You would probably also remember what your high side was as it would be ****ing high. Sent from my iPhone using Tapatalk [/QUOTE]

Verification

Random media

IMAG0539

Elite WG

The Truck

2012-11-03_18-01-21_621

truck29

vgt turbo functions

Magneto_side_v21

20140221_181947

IMAG0521

Latest posts

Coined wheels
- Latest: PSD-BLACK-CLOUD
- Yesterday at 10:29 PM
Suspension, Drive Train, and Tires
10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 10:21 PM
2017+ 6.7 Aluminum Super Duty
2000 f350 dually lariat
- Latest: PSD-BLACK-CLOUD
- Yesterday at 10:18 PM
7.3 Aftermarket
6.4 dies while driving. Starts up again and dies. P0625
- Latest: taterthedog
- Yesterday at 10:28 AM
6.4 Tech
‘10 6.4 rebuild
- Latest: Powerstroke Cowboy
- Wednesday at 8:47 PM
6.4 Tech & FAQ

Members online

No members online now.

Total: 1,087 (members: 1, guests: 1,086)

Top