Jakey
New member
Dana 60 with 3.55 Axle Ratio from 1994 F350
From a Truck that sat during the winter, so it will clean up nicely
Located in Ephrata PA 17522
Has most of what's needed for an F250 swap
Ancillary parts pictued are not for sale unless axle is first sold separately
Pictured:
Dana 60 Axle Assembly 3.55 Ratio with Tie-Rods [Lockout Hubs available]
Trac Bar and Bracket with Bolts
Front Anti-Sway bar with Axle Housing and Frame Brackets [Will need links, I may have a decent set, not pictured]
Front Spring U-bolt for size reference to have new made or reuse Dana 50 U-bolts
F350 Pitman Arm
Rear F350 4.25" Blocks
Rear F350 16 MM U-Bolts for use with Standard springs or with Aux Overload spring
Rear F350 Longer Anti-Sway Bar links [OK condition]
$1000 obo for everything listed above
Also available:
Matching 3.55 10.25 Rear Axle [Non-LSD]
Rear Anti-Sway Bar with frame and axle brackets
F350 Front Prop Shaft Double Cardan for 460 or Diesel with ZF with 13-56 or 44-07 Transfer Case
I also have a 13-56 C/V Yoke, I could Possibly part with a 44-07 C/V Yoke
From a Truck that sat during the winter, so it will clean up nicely
Located in Ephrata PA 17522
Has most of what's needed for an F250 swap
Ancillary parts pictued are not for sale unless axle is first sold separately
Pictured:
Dana 60 Axle Assembly 3.55 Ratio with Tie-Rods [Lockout Hubs available]
Trac Bar and Bracket with Bolts
Front Anti-Sway bar with Axle Housing and Frame Brackets [Will need links, I may have a decent set, not pictured]
Front Spring U-bolt for size reference to have new made or reuse Dana 50 U-bolts
F350 Pitman Arm
Rear F350 4.25" Blocks
Rear F350 16 MM U-Bolts for use with Standard springs or with Aux Overload spring
Rear F350 Longer Anti-Sway Bar links [OK condition]
$1000 obo for everything listed above
Also available:
Matching 3.55 10.25 Rear Axle [Non-LSD]
Rear Anti-Sway Bar with frame and axle brackets
F350 Front Prop Shaft Double Cardan for 460 or Diesel with ZF with 13-56 or 44-07 Transfer Case
I also have a 13-56 C/V Yoke, I could Possibly part with a 44-07 C/V Yoke
Last edited:
