• 1) What are you selling?

    2) What is its condition?

    3) Where are you located?

    4) What is your asking price?

    5) Pictures/videos?

    6) At least 3 days between bumping your own ad.

    7) No more than 5 ads per individual at once.

    8) No commercial sales.

    9) You must post when the item sells and state that it is SOLD. Do not report the post or PM moderators to remove your post once it is sold.

    10) No feeler ads.

    11) No firearms or firearm accessories.

1999 EC/LB F-350 7.3 manual 59k Miles!!!! CHERRY

O2ShootTheJ

New member
Joined
May 19, 2011
Messages
3,567
Reaction score
0
Hey fellas, my pops is ready to get rid of his beloved 7.3 in order to pick up either a 6.4 or 6.7 dually. The truck was stock until about 50 or 55k at which time we put a dp 6 position chip, S&B intake, and 4" turbo back MBRP exhaust. We threw a pillar in there with egt, boost, and trans gauge (bought them as a kit not thinking, trans gauge isn't hooked up, will throw in a oil pressure gauge with the truck). It has fuel hostage 20x12 deep wheels with nitto a/ts. I think they are about 36.5x14 or so. It rubs some at full lock. Truck also has a winch and a roll n lock, as well as a kenwood in dash unit with navigation.

This truck is CLEAN. Has less rust than my 08 did, my pops doesn't drive it in the rain and it is kept in the garage. Everything on this truck is immaculate.

He is asking $27,000 semi-firm.


IMG_2646-1.jpg

IMG_2647-1.jpg

IMG_2648-1.jpg

IMG_2649.jpg

IMG_2650.jpg

IMG_2651-1.jpg

IMG_2652-1.jpg

IMG_2653.jpg

IMG_2654.jpg

IMG_2655-1.jpg

IMG_2656.jpg

IMG_2657.jpg

IMG_2658.jpg

IMG_2659.jpg

IMG_2660.jpg

IMG_2661-1.jpg

IMG_2662.jpg

IMG_2663-1.jpg

IMG_2664.jpg

IMG_2665-1.jpg

IMG_2666.jpg
 

O2ShootTheJ

New member
Joined
May 19, 2011
Messages
3,567
Reaction score
0
I'm not really sure, he ordered it that way from the factory. It was a inch or two shorter than my 08 on 7" and 37's. He used to have 16.5x12 welds on parnelli jones m/ts and it looked amazing, but the tires wore out and no one makes a decent tire for the 16.5s anymore. Still have the welds
 

Emery19

New member
Joined
Sep 5, 2011
Messages
969
Reaction score
0
Location
Mount Laurel, NJ
geeze thats a clean truck there dan. you should have sold your dad yours, bought his and picked up a car with the left over.

either way glws. clean trucks run in the family
 

O2ShootTheJ

New member
Joined
May 19, 2011
Messages
3,567
Reaction score
0
I'm in VA so its about halfway across the US depending on where you are in Kansas
 

lincolnlocker

Well-known member
Joined
May 25, 2011
Messages
27,907
Reaction score
167
Location
Central Michigan
i paid 20k 4.5 yrs ago for my dually with only 50k miles on it.. thats a nice truck but holy hell on the price... thats almost double what its worth.. glws
 

O2ShootTheJ

New member
Joined
May 19, 2011
Messages
3,567
Reaction score
0
i paid 20k 4.5 yrs ago for my dually with only 50k miles on it.. thats a nice truck but holy hell on the price... thats almost double what its worth.. glws

My pops is set on a price and he will keep the truck if he doesn't get what he wants for it. I told him he might be able to get 20 for it (it is immaculate) but he said if he couldn't get 25k for it he would keep it. I threw it on ebay to see if I could get some exposure to some of those 7.3 nuts
 

golfer

New member
Joined
May 18, 2011
Messages
1,209
Reaction score
0
Not digging the rims...but a forged rod 7.3 with under 60k miles on it...he should get more than 20k for it...it's worth it.

I picked up a 2000 6spd ECSB with 74k miles on it a year or two ago...it was as clean as your dads...

GLWS!
 

O2ShootTheJ

New member
Joined
May 19, 2011
Messages
3,567
Reaction score
0
Yea we feel the same way about the wheels. He had 16.5x12 weld wheels on there with 36x14 parnelli jones m/ts but the belts busted in some of the tires and no one makes the right size tires for a 16.5 anymore. It looked WAYYY better with the 16.5s.
 

Latest posts

Members online

Top