Bosshawg600
New member
Unfortunately, I have decided to go back to school full time and I am having to sell my pride and joy. This truck runs and drives perfect and I have zero complaints. This is a well maintained truck and has been my daily driver since I purchased it. I was planning to have this truck for a long time and built it up for reliability and longevity. This truck has never been Sled Pulled, Drag Raced or even beat on. Here is a list of all the current modifications.
Drive train and Suspension Mods:
-Full 06+ front end conversion
-Debadged (still have if wanted)
-Front 2 rims are SRW Brand New Black Ultra Goliath’s (Have Stock Steel Painted DRW front rims and Spacers)
-Painted Stock rear rims (Have all new simulators and Caps for all four coroners)
-Billet Black Upper and Lower Grill
-Blacked out Tail Lights, 3rd Brake light and Tailgate Light
-RECON Line of Fire Tailgate Bar
-RECON Smoked Cab Lights
-RECON Smoked Fender Lights
-Night Runner Headlights
-Retro Solutions 8000K HID headlights
-NV5600 withSouth Bend Dual Disc Clutch
-Leveling Kit
-Traction Bars with safety Loops
-Brand New Steering Box stabilizer
-Brand New Luk’s Links Sway Bar Bushings
-New MBRP 5” Exhaust with 7” DPF style tip
-Black Painted Front and Rear Bumpers
-295 / 70 R17 Nitto Terre Grapplers (33’s)
-Custom Aluminum Diamond Plate Mud Flaps
Engine Mods:
-BANKS Tecni-Cooler with 3” boost tubes
-Flex-a-Lite Dual Electric Fans with automatic temperature control and
Stainless Steel shroud
-Wicked Diesel 120hp Tips
-62mm Turbo
-5” Intake
-2nd Gen Manifold swap w/ 4” Down Pipe
-Stainless Steel Intake
-Smarty POD Programmer
-Edge EZ (Not currently Installed)
-Full Color Mechanical Gauges with built in Low and High Warning Lights
-EGT
-Boost
-Rail Pressure
-Fuel Pressure
-FASS FP-100 with Remote Water Separator and Fuel Filter
Interior / Exterior
-Dual Heated Power Leather and Suede Seats
-No Scratches, Tears or burns
-Husky Floor mats
-Alpine CD player
- Rhino Lined Bed
- Gooseneck Hitch with 4, 5 and 7 Prong Hook ups
-Black Tractor Supply Diamond Plate Tool Box
- HornBlaster Conductor Special located inside the tool box with on/off switch. Can be honked with the stock Horn Button
- Paint is in Very good Condition with a few chips at the front lower coroners of the dually fenders
-Tinted Windows
-Cummins Billet Shift Knob
Truck currently has 166K miles, but runs like a top! Will change a bit because i still drive the truck.....
18,500 as it sits with all the parts I have sitting around for it!
Drive train and Suspension Mods:
-Full 06+ front end conversion
-Debadged (still have if wanted)
-Front 2 rims are SRW Brand New Black Ultra Goliath’s (Have Stock Steel Painted DRW front rims and Spacers)
-Painted Stock rear rims (Have all new simulators and Caps for all four coroners)
-Billet Black Upper and Lower Grill
-Blacked out Tail Lights, 3rd Brake light and Tailgate Light
-RECON Line of Fire Tailgate Bar
-RECON Smoked Cab Lights
-RECON Smoked Fender Lights
-Night Runner Headlights
-Retro Solutions 8000K HID headlights
-NV5600 withSouth Bend Dual Disc Clutch
-Leveling Kit
-Traction Bars with safety Loops
-Brand New Steering Box stabilizer
-Brand New Luk’s Links Sway Bar Bushings
-New MBRP 5” Exhaust with 7” DPF style tip
-Black Painted Front and Rear Bumpers
-295 / 70 R17 Nitto Terre Grapplers (33’s)
-Custom Aluminum Diamond Plate Mud Flaps
Engine Mods:
-BANKS Tecni-Cooler with 3” boost tubes
-Flex-a-Lite Dual Electric Fans with automatic temperature control and
Stainless Steel shroud
-Wicked Diesel 120hp Tips
-62mm Turbo
-5” Intake
-2nd Gen Manifold swap w/ 4” Down Pipe
-Stainless Steel Intake
-Smarty POD Programmer
-Edge EZ (Not currently Installed)
-Full Color Mechanical Gauges with built in Low and High Warning Lights
-EGT
-Boost
-Rail Pressure
-Fuel Pressure
-FASS FP-100 with Remote Water Separator and Fuel Filter
Interior / Exterior
-Dual Heated Power Leather and Suede Seats
-No Scratches, Tears or burns
-Husky Floor mats
-Alpine CD player
- Rhino Lined Bed
- Gooseneck Hitch with 4, 5 and 7 Prong Hook ups
-Black Tractor Supply Diamond Plate Tool Box
- HornBlaster Conductor Special located inside the tool box with on/off switch. Can be honked with the stock Horn Button
- Paint is in Very good Condition with a few chips at the front lower coroners of the dually fenders
-Tinted Windows
-Cummins Billet Shift Knob
Truck currently has 166K miles, but runs like a top! Will change a bit because i still drive the truck.....
18,500 as it sits with all the parts I have sitting around for it!
