6.0 trans cooler

[Nic]

Is it possible to set one up on a 2001? If any of yall have, would you mind posting up how this is done?

 

[01PSD]

Plenty have done it, this will be a future investment for me as well.

 

[4duggan]

My kid just left with the truck or I could post some pics.
I put in the cooler , Marty plumbed it the right way.


Sent from my iPhone using Tapatalk

 

[Mark Kovalsky]

I don't have pictures, but I know how to do it.

Remove the air to oil cooler (also called the aux cooler) out front. Find the nearest trash can for it. The 6.0L cooler bolts into the same mount. Go to the hardware store and get two adapters to converter from a 3/8" line to a 1/2" line. Connect the two lines that went to the air to oil cooler to the 6.0L cooler with adaptors because the cooler has 1/2" fittings and your lines are 3/8".

 

[Nic]

Good to know...What all extra do we need?

 

[Southmike]

I don't have pictures, but I know how to do it.

Go to the hardware store and get two adapters to converter from a 3/8" line to a 1/2" line.

http://powerstrokenation.com/forums/showthread.php?p=584492

 

[Jarrod B]

oh yeah. did it on my e99 some years ago. big difference in cooling.

 

[Tonka350]

I did it on my 2000....I can't remember how I did everything though and I no long have the truck in front of me to see what I did...

Chad

 

[alradco]

The 6.0 swap should be a sticky. Seems like someone is always looking for how to do it.