Reply to thread

Message: [QUOTE="kadiesel, post: 1267849, member: 22725"] Hi any help would be appreciated. I have a 2011 f25 6.7 powerstroke, I am getting a p0087 code I have checked the pcv and it looks fine no contamination reading fine. I am only able to get about 13000 psi fuel rail pressure when it is calling for around 24000. The vcv is reporting around 32, is that where it should be. I think I may have an air leak at my low pressure pump/filter. I am going to replace that with an airdog or fass soon. The truck is completely stock no tuners or anything the truck itself has 140000 and the engine only has around 15000 on it from a donor truck. The hpfp and all came from the donor as well. Thank you all for any help with my problem. [/QUOTE]

Verification

Random media

2011-05-27_11-32-15_272

37_-fuel-supply

Stock TDE1 Timing

1997 ZF5 DRW

sam_and_her_truck

photo-4

eleanor_part_two_35_

safe_008

20150620_190855

2008 6.4L pic2

Latest posts

0
6.7 pump with DD fuel bowl delete for 6.0. All lines and fittings with Rudy's drawstraw
- Latest: 06Mike
- 46 minutes ago
Aftermarket Performance
A few turbo questions and a rant
- Latest: ghohouston
- Yesterday at 6:06 PM
7.3 Aftermarket
Florida...
- Latest: Mark Kovalsky
- Wednesday at 10:22 AM
Southeast US
American made up-pipes?
- Latest: Powerstroke Racer
- Wednesday at 9:03 AM
7.3 Aftermarket
Georgia Roll Call
- Latest: ju015dd
- Tuesday at 7:03 AM
Southeast US

Members online

No members online now.

Total: 1,262 (members: 0, guests: 1,262)

Top