700xxmaniac
New member
- Joined
- Jan 30, 2014
- Messages
- 17
- Reaction score
- 0
So my truck got hit by a 2.5ton military truck.. Totaled it good. So I wana put my running gear in a mud truck I just got. It's a 90 ranger body on a shorted f350 frame. I got all the fab work down. But electrical..not so much. I am going to pull the entire Harness Intact. And try to figure it out. now outside of my idm/pcm/tps, what else would I need. And how would I make it run? I was thinking to just swap the steering Collum too so I don't have to deal with ignition wires. Anyone know where I can find wire diagrams. I wana have as much as the stuff in the truck work (heat/wipers/lights/signals) all the good stuff. Btw I would to be able to make this truck street able. It was on the road with a 302 in it last. Any tips? Or suggestions would be awesome! First time doing a swap like this.. Ain't Gona be easy but it will be done!
this is the ranger it'll be going in!
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk