Reply to thread

Message: [QUOTE="97cherokee, post: 1408990, member: 22488"] hey guys im working on rebuilding an engine for my 01. ive got the block checked out and bored .030 and main bores checked for alignment. this was a junkyard engine and when i got it torn down i found that it had broken a lifter hold down and bent the push tube. i inspected the cam and didnt see any issues with it. i plan to install a new set of lifters, new push tubes and get the heads rebuilt. i also picked up a set of stock forged rods for it. i plan on at the max this engine making 450 hp in its life with me so what would be some good upgrades to do while i am inside it? i dont think head studs will be needed. but i am open to suggestions! im really looking to fix any weak points in this engine. i am currently running swamps stage two injectors and a 38r turbo with custom tunes, so nothing to exciting. what is a comprehensive rebuild kit and a good brand? thanks!!! [/QUOTE]

Verification

Random media

20161115_132613

old trucks

DSCF3417

546938E7-EDC9-48FE-A182-11783A03CEA8

10.25 carnage

6A_800

DynoPro-Motor

yoda

front1

112

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Friday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- May 4, 2025
6.0 Aftermarket

Members online

Arisley

Total: 1,030 (members: 1, guests: 1,029)

Top