Reply to thread

Message: [QUOTE="powerstroker66, post: 1504663, member: 8580"] Hi all, ive been battling an electrical issue with a 99' f550 for some time now. When i first got it the truck ran very rough, no power, bad miss(es). New cam sensor/clean fuel/filter it was running much better but noticeable miss. Ended up replacing 7 of the 8 injectors due to rusty fuel trashing the plungers. Still threw contribution faults on the cylinders that had new injectors. After buzz test it came back with P1294...so i replaced IDM and now it runs a little better but still has a long crank and a miss. Driving the truck it doesn't seem to be down on power at all and and miss hardly noticeable if at all at 2k rpms. Buzz test again and now i have a P1271 for cylinder #1. UVC harness good and ohmed out good, engine harness looks good, fresh OEM cam sensor, and known good IDM. Im starting to think the actual engine harness might have a problem? What do you guys think? Thanks! [/QUOTE]

Verification

Random media

my_phone_026

secret_lab

Always changing to make it a home on the road.

Headed to MIR for Big Rig Nationals!

004E1EBD-4F6C-4537-8594-D5761F9C91D8

20170502_212427

27D166B1-8983-4693-B824-92E6A4913538

HPP_2006_Polaris_900_RMK_159

twin2

IMG00101-20100427-1510

thumb_IMG_1328_1024

Latest posts

10R140 failure
- Latest: PSD-BLACK-CLOUD
- Yesterday at 1:04 PM
2017+ 6.7 Aluminum Super Duty
2010 headunit
- Latest: glog
- Wednesday at 1:17 PM
6.4 Tech
D
Turning off the Auxiliary powertrain control module
- Latest: donaldtfreeman
- Tuesday at 10:43 AM
6.0 Tech & FAQ
4r100 P0715/P0717 trouble codes.
- Latest: Tiha
- Tuesday at 8:07 AM
7.3 Tech & FAQ
I must be getting old… Exhaust is too loud
- Latest: ju015dd
- Sunday at 7:59 AM
6.0 Aftermarket

Members online

Total: 735 (members: 2, guests: 733)

Top